Yellow |
Yellow
ENGLISH 39
Remove the Classic Milk Frother from the hot water/steam wand.
Remove the “INTENZA+” water filter from the water tank if it was in- stalled and replace it with the small white original one. Place the water tank back into the machine.
Press the “
” button.
Press the “
” button to start the descaling process.
Note:
If you press the “
” button by mistake, press the “
” button to quit.
Remove the water tank and pour the entire content of the Descaling solution. Then fill the water tank with fresh water up to the calc clean level.
Place the water tank back into the machine.
Empty the drip tray and coffee grounds drawer and place them back.
Place a large container (1.5L) under both the steam/hot water wand and the dispensing spout.