Turbo Chef Technologies HHB-8114, HHB-8708 owner manual REPLACING/EXCHANGING Jetplates

THEORY OF OPERATION, SPECIFICATIONS, AND INSTALLATION 7

F I G U R E 5: 24′′ (610 mm) Oven Cart with Oven(s)

24′′ (610 mm) Oven Cart	24′′
Height		(610 mm)
with single oven	44.5′′	(1130 mm)
with stacked ovens*	65′′	(1651 mm)
Width	27.8′′	(706 mm)
with single oven	27.8′′	(706 mm)
with stacked ovens*	27.8′′	(706 mm)
Depth	26.625′′	(676 mm)
with single oven	31.5′′	(800 mm)
with stacked ovens*	31.5′′	(800 mm)

*Requires Stacking Bracket.

Assembly instructions are included with the cart. If additional help is needed, call Customer Service at 800.90TURBO or your Authorized Distributor.

REPLACING/EXCHANGING JETPLATES

The jetplates ensure that hot air is distributed to maximize food quality. Different jetplates result in different cooking results.

To replace or exchange a jetplate: (Figure 6)

1.Ensure the oven is in the OFF state and cook cavity temperature is 150°F (66°C) or lower.

2.Remove the oven rack.

3.Remove the support rails.

NOTE: Removing hardware is not required – the support rails snap on and off. However, they may require a gentle tap with a utensil to snap into/out of place.

4.Remove jetplates and install new ones.

5.Reinstall support rails and oven rack.