Vita-Mix XTG012 owner manual Are and Cleaning, Care Note

Page 20

C are and Cleaning

Care Note

To ensure that you get the longest possible life from your Vita-Mix product, we recommend the following products, when used as directed by the supplier:

Cleaning Products	Supplier
Solid Supra, Solid Power,	. . . .Ecolab, Inc., St. Paul, MN
Guardian Acclaim, Solid Guardian Plus,	800-352-5326
Solid Super Impact, Solid Insure	www.ecolab.com
Diverpak	. . . . Diversey, Livonia, MI
Eclipse H2	800-521-8140
Liqui-Safe L7
Acclean	. . . Klenzade Products
Poly-Brite	Division of Ecolab
	St. Paul, MN
	612-293-2165
Glow MB-1	. . . .Wesmar Company, Inc.
Lustre NC-25	Seattle, WA
Lustre Plus	206-783-5344
	www.wesmar.com
PSRA 41-D, PSRA 41-E	. . . .Anderson Chemical Co.
Liqui-Ware 1, Liqui-Ware MC	Litchfield, MN
D-Flex, Sur-Met	800-366-2477
	www.andersonchemical.com
Rinse Aids	Supplier
Solid Rinse Dry	. . . Ecolab, Inc., St. Paul, MN
Solid Brilliance	800-352-8140
Jet Dry, Rinse Dry	www.ecolab.com
Destainers	Supplier
NuWare	. . . Diversey, Livonia, MI
	800-521-8140

DO NOT use abrasive cleaning agents or concentrated bleach when cleaning.

20

Image 20

Contents Blending Station MP Important Safeguards Figure a Ontrol Panel Blending Station MPSpeed Control High/Low PulseNORM, WARM, HOT, a usage count and a total. Cannot be clearedTurn the machine on Turn the machine on Remove the container from the machineCustom Id Assembly Two-Part LidOne-Piece Lid optional Cover with Removable Hinge DesignBack Cover Push until back of cover is seated against the Motor BaseDo not strike the blender when removing from the counter Preparing the counter areaElectrical requirements VAC 50/60 Hz 15 AmpsBlending Station dimensions Gasket Installation Instructions Counter GasketLending Tips Never start the motor before the container is in placeNstructions PRE-SET Program Remove the container, pour, garnish and serve the drinkUntil the desired speed Desired speedDo not force. Do not attempt to disassemble blade assembly Retainer Nut RemovalArts List Item# Part#15569 #15567#1159 #15574 #15575 Are and Cleaning Care NoteMotor Base Control PanelLid Cover DoorDo not soak the blade agitator assembly ContainerPower Requirements PecificationsBlending Station MP On-Counter Blending Station MP In-CounterTop nine problems you can fix on your own Problem Solution #1Solution #2 Solution #3Solution #4 Cooling the motorLimited Warranty ArrantyErvice Contract Foodservice Division Usher Road, Cleveland, Ohio 44138-2103 USA