Vita-Mix XTG012 owner manual Arranty, Limited Warranty

Page 26

Warranty

Limited Warranty

Vita-Mix®Corporation warrants your Commercial Blending Station® MP to be free from defects in materials and workmanship for a period of three years from the date of purchase when used in accordance with the accompanying instruction booklet. Provisions of this limited warranty are void if your Blending Station MP has been subjected to obvious abuse, negligence, accident, alteration or failure to follow operating instructions, or product exposure to abnormal or extreme conditions. Cosmetic changes such as discoloration of parts of the product in the hands of the user or the effects of the use of abrasive cleaners will not be warranted or considered defects. The cleaning or removal of food products along with any damage caused by allowing them to build-up is not covered by this limited warranty. Improper installation of the in-counter model is not covered by this warranty. Also this warranty is void if the Blending Station MP is put into a sound reduction chamber or otherwise prevented from receiving proper cooling. In the event your Vita-Mix appliance needs service or repair covered by the terms of

this warranty, please call the Vita-Mix Corporation for shipping instructions. The Blending Station MP must be sent in original or sufficient packaging. This limited warranty is in lieu of any other warranty expressed or implied.

No representative or any other person is authorized to make any other warranty or to assume any liability not strictly in accordance with the foregoing. This limited warranty gives you specific legal rights which may vary from state to state. Proof-of-purchase may be required to prove date of purchase.

Outside the Continental USA, other warranties will apply. (Call or check with distributor for details.) In case of shipping damage, notify the shipper or carrier immediately.

26

Image 26
Contents Blending Station MP Important Safeguards Figure a Speed Control Ontrol PanelBlending Station MP High/Low PulseNORM, WARM, HOT, a usage count and a total. Cannot be clearedTurn the machine on Turn the machine on Remove the container from the machineCustom One-Piece Lid optional Id AssemblyTwo-Part Lid Cover with Removable Hinge DesignBack Cover Push until back of cover is seated against the Motor BaseElectrical requirements Do not strike the blender when removing from the counterPreparing the counter area VAC 50/60 Hz 15 AmpsBlending Station dimensions Gasket Installation Instructions Counter GasketLending Tips Never start the motor before the container is in placeNstructions PRE-SET Program Remove the container, pour, garnish and serve the drinkUntil the desired speed Desired speedDo not force. Do not attempt to disassemble blade assembly Retainer Nut Removal#15569 Arts ListItem# Part #15567#1159 #15574 #15575 Are and Cleaning Care NoteLid Motor BaseControl Panel Cover DoorDo not soak the blade agitator assembly ContainerBlending Station MP On-Counter Power RequirementsPecifications Blending Station MP In-CounterSolution #2 Top nine problems you can fix on your ownProblem Solution #1 Solution #3Solution #4 Cooling the motorLimited Warranty ArrantyErvice Contract Foodservice Division Usher Road, Cleveland, Ohio 44138-2103 USA