Vita-Mix XTG012 owner manual Ervice Contract

Page 27

S ervice Contract

This Blending Station® MP includes a 1-Year Service Contract effective from date of purchase. In the event your machine should need parts or repairs covered under this Service Contract, call Vita-Mix®customer service immediately for instructions. Proof of date of purchase may be required. This does not cover abuse, misuse, tampering, improper installation or extreme conditions.

The Vita-Mix Service Contract includes the following:

1.Only one extra drive socket - to facilitate simple repairs and prevent down time - is included and packaged with each machine.

2.Additional drivers, unless defective, are not covered. NOTE: to determine if you have a defective part please order a replacement part through Vita-Mix Customer Service, and when the new part arrives, return the old part in the same packaging. Vita-Mix will inspect the returned part and, if defective, issue a refund for the price of the new part. A part will be considered defective if no abuse or neglect was involved with its break. Non-defective parts sent to Vita-Mix for inspection will not be returned if deemed unusable. Service Contract covers functionality of the machine but not abuse or lack of recommended maintenance.

3.In Continental USA, sender pays freight one way to Vita-Mix Corporation. Vita-Mix Corporation pays UPS ground freight charges to return machine to sender. Sender pays costs for special shipping requests. Outside the Continental USA, other service contracts may apply.

NOTE: Limited Warranty and Service Contract are honored directly through the Vita-Mix Corporation, Cleveland, Ohio USA. Non-warranty repairs can be performed by any CFESA service center. Call Vita-Mix at 800-4DRINK4 (800-437-4654) or 440-235-0214.

Before returning this product for any reason, including repair, please, first contact our Customer Service Department at: 800-4DRINK4 (800-437-4654) or 440-235-0214 to receive a “Return Authorization Number.” Outside the USA, contact your Vita-Mix Distributor.

27

Image 27
Contents Blending Station MP Important Safeguards Figure a High/Low Pulse Ontrol PanelBlending Station MP Speed ControlCannot be cleared NORM, WARM, HOT, a usage count and a total.Turn the machine on Remove the container from the machine Turn the machine onCustom Cover with Removable Hinge Design Id AssemblyTwo-Part Lid One-Piece Lid optionalPush until back of cover is seated against the Motor Base Back CoverVAC 50/60 Hz 15 Amps Do not strike the blender when removing from the counterPreparing the counter area Electrical requirementsBlending Station dimensions Counter Gasket Gasket Installation InstructionsNever start the motor before the container is in place Lending TipsNstructions Remove the container, pour, garnish and serve the drink PRE-SET ProgramDesired speed Until the desired speedRetainer Nut Removal Do not force. Do not attempt to disassemble blade assembly#15567 Arts ListItem# Part #15569#1159 #15574 #15575 Care Note Are and CleaningCover Door Motor BaseControl Panel LidContainer Do not soak the blade agitator assemblyBlending Station MP In-Counter Power RequirementsPecifications Blending Station MP On-CounterSolution #3 Top nine problems you can fix on your ownProblem Solution #1 Solution #2Cooling the motor Solution #4Arranty Limited WarrantyErvice Contract Usher Road, Cleveland, Ohio 44138-2103 USA Foodservice Division