4.Insert the custom programmed chip with the words, “THIS SIDE FACING TO THE FRONT OF THE MACHINE” toward you and the silver contact bars up, into the slot. The DISPLAY WINDOW will read “NEW MODULE.”
5.Within 10 seconds the six PRE-SET buttons will be re-programmed and the DISPLAY WINDOW will read “SAVED” then “READY.” If nothing happens when the programming chip is fully inserted, turn the chip in the opposite direction and try again.
6.Remove the programming chip and return it to the original package.
7.Press one of the six PRE-SET buttons to reveal, in the DISPLAY WINDOW, the name of the program/drink.
8.Carefully place the Blending Station MP motor back into the hole in the counter.
MAXIMUM PERFORMANCE
In-Counter | Custom |
Hole | Programmed |
| Chip |
Resetting the PRE-SET buttons to the original factory settings
WARNING: Please read all step before reprogramming. Resetting the PRE-SET PROGRAM buttons will revert the six program buttons to times that are not optimized for the MP48 container. Use the program chip supplied with your machine and follow the instructions on page 6 for programming your machine with the correct MP programs.
1.Enter the OWNER CONTROLS (press the Vita-Mix Logo). “MODE” will appear in the display window. Press the PRE-SET buttons 1 and then 6. The display window will say “COUNT TEMP TOTAL.”
2.Press the Vita-Mix Logo two more times to reveal the instructions on resetting the PRE-SET buttons.
3.Press and hold button 4 until the DISPLAY WINDOW reads “RESTORING PLEASE WAIT.” The PRE-SET buttons are now reset to the original factory settings.
