Kenmore 970-5984 manual Recipe Recaff cantd, Adjusting Oven Temperature, Operating oven light

Page 21

Setting Oven Controls

Recipe Recaff (cant'd)

To quickly erase all stored recipes:

]. Press and hold the 7 key pad until the first single tone sounds (6 seconds).

2.After the first tone press STARTonce. Any stored recipes will be erased.

Important note:

Clearing all recipes wiil also reset all other adjustments to factory settings. These include 12 or 24 hour display, continuous bake or 12-Hour Energy Savings mode, silent or audible control mode, Fahrenheit or Celsius temperature display and any oven temperature adjustment settings that have been made.

Adjusting Oven Temperature

Your appliance has been factory calibrated and tested to ensure an accurate baking temperature. For the first few uses, follow your recipe times and temperature

recommendations carefully. If you think the oven is cooking too hot or too cool for your recipe times, you may adjust the control so the oven cooks hotter or cooler than the oven temperature displayed.

The oven temperature may be increased as much as +35°F (+19°C) or decreased -35°F (-19°C) from the factory calibrated settings.

Example; to increase (+) or decrease (=) the oven temperature by 20°F:

1.Press and hold Bake key pad until the control provides the 2nd audible tone (about 6 seconds).

2.Enter 2 0 using numeric key pad.

3.Press Flex Clean key pad to toggle between plus (+) if increasing temperature or minus (-) if decreasing the

temperature. These symbols will show in the display.

4.Press STARTto accept change.

Important notes:

"Oven temperature adjustments made will not change the Broil or Flex Clean function temperatures

"If the temperature shows an adjustment of 20°F, and a +20°F adjustment is needed, you can toggle between the minus (-) or plus (+) in the display when pressing Flex Clean key pad (See step 3).

DO NOT USE oven thermometers such as those found in grocery stores to check the temperature settings inside your oven. These oven thermometers may vary as much as 20 to 40°F degrees from actual temperatures.

The oven temperature adjustment may be made if your oven control has been set to display °C (Celsius) temperatures. Minimum and maximum settings for Celsius is plus (+) or minus (-) 19°C.

Operating oven light

The interior oven light will automatically turn ON when the

oven door is opened.

Press _J to turn the interior oven light ON and OFF whenever the oven door is closed.

The interior oven light is located at the upper left rear wall of the oven interior and is covered with a glass shield held by a wire holder. The glass shield protects the bulb from high temperatures and should always be in place whenever the oven is in use.

To replace the interior oven light, see Replacing oven light in the Care & Cleaning section

Electrical outlet and circuit protection

(on some models)

For protection against surcharge, a 15 amp, 120 volt circuit breaker reset is provided near the electric outlet located on top of backguard panel. If needed, press circuit breaker switch to reset. On some models a night light feature is included. The night light switch will be located on the upper left backguard panel.

21

Image 21
Contents Ienmore Contents Ienrnore Limited WarrantySave these instructions for future reference Install anti-tip device packed withSave these instructions for future reference Irnportant Safety InstructionsProtective Liners = do not USE IgniteSave these instructions for future reference Rnportant Safety InstructionsProduct Record Serial Plate Location 970Removing, replacing and arranging racks Before Setting Oven ContrdsTypes of oven racks Air circulation in the ovenControls Using Proper CookwareSurface MaterialElernent On indicator lights Before Setting Surface ControlsAbout the surface elements Home CanningSurface element settings Setting Surface ControlsOven Control Functions Control settingsOven control keypads Minimum & maximumSetting Timer Setting Oven ControlsSetting Clock Setting 12 or 24 hour display modeSetting Oven Lockout Changing oven temperature displaySetting silent or audible control mode To cancel the oven lockout featureSetting Preheat Setting BakeExample set oven for Preheat to 450F Setting Cook Time Setting Delay StartWhen the programmed cook time runs out Suggestions for Convection baking Cony Bake some models Convection Bake some modelsInside Cony Roast some modelsBroil Setting Oven ControkSlow Cook Recipe Recall Warm & Hold TMRecipe Recaff cantd Adjusting Oven TemperatureOperating oven light Electrical outlet and circuit protectionSabbath Feature for use on the Jewish Sabbath & Holidays Press Stop Read before starting Flex Clean Flex CleanSelling Flex Clean Example to set Flex Clean to start immediatelyDelayed Start Flex Clean When Flex Clean is finishedIf it becomes necessary to stop Flex Clean when active Care Cleaning Care & Cleaning General cleaningAluminum foil and utensils Surface elements and drip bowls Cleaning drip bowlsTo remove the surface elements and drip bowls Never immerse a surface element in waterRaising and lowering the cooktop some models WireReplacing oven light some models Electrical outlet and circuit protection On some modelsRemoving and replacing the lift-off oven door Special door care instructionsTo remove oven door Problem Solution Before You Call . Solutions to common problemsIf you Is tooProblem Before You Call * Solutions to common problemsProblemSolution Page Protection Agreements