Kenmore 970-5984 manual Setting Preheat, Setting Bake, Example set oven for Preheat to 450F

Page 14

Setting Oven Controls

Setting Preheat

For best baking performance use the Preheat feature. The Preheat feature will bring the oven up to the set cooking temperature. A reminder tone will sound indicating when the set temperature is reached and to place the food in the oven.

When the oven is finished preheating the preheat feature will perform like the Bake feature and continue to maintain the oven set temperature until cancelled.

Preheat may be set for any oven temperature between 170°F (77°C) to 550°F (288°C).

Example; to set Preheat with default oven temperature of 350°F:

1.Press PreHeat key pad.

2.Press START(See Fig. 1).

To cancel preheating at anytime press STOP.

Fig. 1

Example; set oven for Preheat to 450°F:

1.Press PreHeat key pad.

2.Press 4 5 0 using numeric key pads.

3.Press START.

[]

To cancel preheating at anytime press STOP.

Important notes:

"When setting Bake or a cooking feature that preheats

the oven (except Broil), the Convection fan will turn on and stay on until the oven reaches set temperature.

"Preheating is not necessary when roasting or cooking casseroles.

Setting Bake

Use the bake feature whenever the recipe calls for baking using normal temperatures. A reminder tone will sound indicating when the set bake temperature is reached and to place the food in the oven.

Bake may be set for any oven temperature between 170°F (77°C) to 550°F (288°C).

Always use pot holders or oven mitts when using the oven. When cooking, the oven interior, oven racks and cooktop will become very hot which can cause burns.

Example; to set Bake with default oven temperature of 350°F:

1.Press Bake key pad.

2.Press START.

To cancel bake at anytime press STOP.

Example; to set Bake for oven temperature of 425°F:

l.Press Bake key pad.

2.Enter 4 2 5 using numeric key pads.

3.Press START.

To cancel bake at anytime press STOP.

Important notes:

"When setting Bake or a cooking feature that preheats the oven (except Broil), the Convection fan will turn on and stay on until the oven reaches set temperature.

The oven will bake no longer than ]2 hours. If you wish to continuously bake, see Changing between continuous bake setting or ]2-Hour Energy Saving feature for detailed information.

Dark or dull pans absorb more heat than shiny

bakeware resulting in dark or overbrowning of foods. It may be necessary to reduce the oven temperature or cook time to prevent overbrowning of some foods. Dark pans are recommended for pies. Shiny pans are recommended far cakes, cookies and muffins.

14

Image 14
Contents Ienmore Ienrnore Limited Warranty ContentsInstall anti-tip device packed with Save these instructions for future referenceProtective Liners = do not USE Irnportant Safety InstructionsSave these instructions for future reference IgniteSave these instructions for future reference Product Record Serial Plate Location Safety InstructionsRnportant 970Types of oven racks Before Setting Oven ContrdsRemoving, replacing and arranging racks Air circulation in the ovenSurface Using Proper CookwareControls MaterialAbout the surface elements Before Setting Surface ControlsElernent On indicator lights Home CanningSetting Surface Controls Surface element settingsOven control keypads Control settingsOven Control Functions Minimum & maximumSetting Clock Setting Oven ControlsSetting Timer Setting 12 or 24 hour display modeSetting silent or audible control mode Changing oven temperature displaySetting Oven Lockout To cancel the oven lockout featureExample set oven for Preheat to 450F Setting PreheatSetting Bake When the programmed cook time runs out Setting Cook TimeSetting Delay Start Cony Bake some models Convection Bake some models Suggestions for Convection bakingCony Roast some models InsideSetting Oven Controk BroilSlow Cook Warm & Hold TM Recipe RecallOperating oven light Adjusting Oven TemperatureRecipe Recaff cantd Electrical outlet and circuit protectionSabbath Feature for use on the Jewish Sabbath & Holidays Press Stop Selling Flex Clean Flex CleanRead before starting Flex Clean Example to set Flex Clean to start immediatelyIf it becomes necessary to stop Flex Clean when active Delayed Start Flex CleanWhen Flex Clean is finished Care Cleaning Aluminum foil and utensils Care & CleaningGeneral cleaning To remove the surface elements and drip bowls Cleaning drip bowlsSurface elements and drip bowls Never immerse a surface element in waterReplacing oven light some models WireRaising and lowering the cooktop some models Electrical outlet and circuit protection On some modelsTo remove oven door Removing and replacing the lift-off oven doorSpecial door care instructions If you Before You Call . Solutions to common problemsProblem Solution Is tooBefore You Call * Solutions to common problems ProblemProblemSolution Page Protection Agreements