Oven Control Functions, Temperature conversion

Oven Control Functions

READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use ofyour oven, become familiar with the various pad functions of the oven as described below.

CLOCK SET PAD--Used to set the

time of day.

OVEN INTERIOR

LIGHT PAD-- Used to turn oven interior light

ON or OFF. This pad is also used to activate

COOK TIME PAD-- Used to enter the length of the baking time.

UP and DOWN ARROW PADS-- Used along BAKE PAD--Used
with the function	pads	to select oven	to select	the bake
temperature, cook	time,	start time (when	function.
programming an automatic start time), time of				FEATURE INDICATOR
day, clean time and minute timer.				FEATURE INDICATOR
day, clean time and minute timer.				LIGHTS--These light to
				LIGHTS--These light to
				use.
			show		which feature	is in
		•		BROIL	PAD-- Used	to
		f"	/	select	the variable broil
				function.

SELECT SELF-CLEAN	•
•	•
PAD--Used to select
the Self-Cleaning
cycle. A 2, 3 or 4 hour
SeIf-Clean time may be
selected.

•

• O_e_

WARM & HOLD PAD--

Used to set the Warm &

Hold feature.


TIMER		SET/OFF		J	DELAY		START
			PAD--
Used	to	set or cancel		the	PAD--		Used to set
minute	timer. The		minute		the desired			start
timer	does not start or			stop	time	for	baking &
cooking.		Also,			Self-Clean.			May	be
TIMER		SET/OFF	pad is		used	with		COOK
used to set the Continuous					TIME	to program			a
Bake	feature,				delayed		bake cycle.

OVEN, PREHEAT & DOOR LOCKED LIGHTS* -- The "OVEN" light will glow each time the oven turns on to maintain the set oven temperature, The "PREHEAT" light will glow when the oven is first set to operate, or if the desired temperature is reset higher than the actual oven temperature, The "DOOR LOCKED" light will flash when the oven door locks and unlocks or when using the Self- Clean cycle or the oven door lockout is activated. The indicator light will glow constantly after the door locks, COOKTOP LOCKED light will glow when the cooktop has been locked (some models).

STOP/CLEAR PAD--

Used to clear any function previously entered except the time of day and minute timer. Press STOP/CLEAR to

stop cooking. Also the

STOP/CLEAR pad is used to activate oven

door lockout setting.

,Note: The OVEN indicat0i light on the electronic displaY will turn ON and OFF when Using the Bake feature and during preheat, This is normal and indicates that the oven is cycling to maintain the selected baking temperature. When the preheat indicator light turns OFF, your oven is ready.

For a silent control panel

When choosing a function, a beep will be heard each time a pad is pressed, tf desired, the control can be programmed for

silent operation. Press and hold @. After 7 seconds, the control will beep once. This will block the controls from

sounding when a pad is pressed. To return the sound, press and hold @ again for 7 seconds until the control beeps

once.

Temperature conversion

The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed for any temperature from 170°F to 550°F (77°C to 287°C).

To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):

1.Press B,oil....appears in the display.

2.Press and hold the A until "HI" appears in the display.

3.Press and hold s,o, until °F or °C appears in the display.

4.Press the A or V to change °F to °C or °C to °F.

5.Press any control pad to return to normal operating mode.