Kenmore Complete Guide to Oven Self Clean and Select Clean Instructions
Page 20

Self-Cleaning (cont'd)

Starting the Select Self-Clean Cycle or a Delayed Start Self-Clean Cycle

For satisfactory results, use a 2 hour Self-Clean cycle for light soils and a 3 hour cycle for average or a 4 hour cycle for heavy soils. NOTE: The kitchen area should be well ventilated using an open window, ventitlation fan or exhaust hood during the 1st Self-Clean cycle. This will help eliminate the normal odors associated with the 1st Self-Clean cycle.

To Set the Controls for a Self-Clean Cycle or a Delayed Start Self-Clean Cycle:

(Note: If you do not want to start a Delayed Self-Clean Cycle, skips steps 2 & 3.)

1.Be sure the clock shows the correct time of day.

2.Press @. The " : " in the time of day will flash.

3.Press and hold the A pad to scroll to the time to start the delayed Self-Clean cycle. Release the pad when the desired time is displayed.

4.Press @. " "appears in the display.

5.Press the J%. or V once. "3:00" appears in the display for a 3 hour cycle. To change to a 2 hour cycle press V.

"2:00" appears in the display or to select a 4 hour cycle press A. "4:00" appears in the display.

As soon as the controls are set, the motor driven lock will begin to close automatically and the "LOCK" indicator light will flash. DO NOT open the oven door while the light is flashing (it takes about 15 seconds for the oven door to lock).

. "CLn" will appear in the display during the Self-Clean cycle and the "LOCK" light will glow until the Self-Cleaning cycle is complete or cancelled and the oven temperature has cooled.

When the Self-CleanCycle is Completed:

1.The time of day _r__End__wi__appearinthedisplaywind_wandthe"_lean__and__L__K__lightwi__c_ntinuet_gl_w.

2.Once the oven has cooled down for about l HOUR and the "LOCK" light has gone out, the oven door can be opened.

3. If "End" is in the display and the Select Clean indicator light remains ON, press _. The time of day will appear in the

display.

NOTE: When the oven is cool, wipe away any residue or powdered ash with a damp cloth or paper towel.

Stopping or Interrupting a Select Self-Cleaning Cycle

If it becomes necessary to stop or interrupt a Self-Cleaning cycle:

1.Press _.

2.Once the oven has cooled down for about l HOUR and the "LOCK" light has gone out, the oven door can be opened.

3.Restart the Self-Clean cycle once all conditions have been corrected.

To avoid possible burns use care when opening the oven door after the Self-Cleaning cycle. Stand to the side of the oven when opening the door to allow hot air or steam to escape.

DO NOT force the oven door open. This can damage the automatic door locking system. Use caution and avoid possible burns when opening the door after the Self-Cleaning cycle has completed. The oven may still be VERY HOT.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Electric Range Estufa elctrica Table of Contents Product Record Important Safety Instructions IMPORTANT--Do not attempt to operate the range duringUtensil Handles Should Be Turned Inward and Not Extend Over Important Safety NoticeUse Care When Opening Oven Door or Warmer Drawer if Canada Range Features Your Electric Range Features IncludeBefore Setting Oven Controls Oven Vent LocationRemoving & Replacing Oven Racks Arranging Oven RacksBefore Setting Oven Controls contd Element on and Hot Surface Indicator LightsAbout the Ceramic Glass Cooktop About the Radiant Surface ElementsTo Operate Simmer Select Surface Element some models Setting Surface ControlsTo Operate Single Radiant Surface Elements all models Setting Surface Controls contd Setting the Warmer Warm & Ready TM Zone some modelsRecommended Food Settings Heating Level To Operate Dual Radiant Surface Element some modelsTo Set the Cooktop Lockout Feature some models / Cooktop Using Power Element some modelsUsing proper cookware Surface CookingTemperature conversion Oven Control FunctionsFor a silent control panel PAD-- UsedSetting Oven Controls To Set the Minute TimerTo Change the Minute Timer while it is in use To Set the ClockSetting Oven Controls contd To Set or Change the Temperature for BakingTo Set Control for Continuous Bake or 12 Hour Energy Saving To Set Control for Oven Lockout LockoutTo Set the Timed Bake and Delay Start Features When the Set Bake Time Runs OutFood category To Set for BroilingTo Operate the Oven Light Setting Warmer Drawer Controls Setting the Warm & Hold TM FeatureTo set Warm & Hold To set Warm & Hold to turn on automaticallyTo Remove and Replace Warmer Warm & Ready TM Drawer Setting Warmer Drawer Controls contdWarmer Warm & Ready TM Drawer Indicator Light some models Adhere to the following cleaning precautions Self-CleaningSelf-Cleaning Oven Self-Cleaning contd Stopping or Interrupting a Select Self-Cleaning CycleTrim Surfaces How to CleanAluminum Trim Pieces & Vinyl General Care & Cleaning contd Plastic or foods with a high sugar contentFor light to moderate soil For heavy, burned on soilDoor Hinge locations With oven door Fully open Special Caution for Aluminum Use on the Ceramic CooktopTo Replace Oven Door Adjusting the Oven Temperature Care and Cleaning of Stainless Steel some modelsChanging the Oven Light To replace the oven light bulbEntire Appliance Does Not operate Before You CallRange Oven light does not work MetalCooktop OnlyPage Call anytime, day or night U.S.A. and Canada Call anytime, day or night U.S.A. only
Top Page Image Contents