
7. COMPONENT TESTING INFORMATION
Function | - Controller assembly is consist of 2 kinds of part those are | |
| and sensor. we can decide part is defect or not when we | |
| check the resistance. |
|
| - | |
| unusual high temperature. |
|
| - Sensor give temperature information to Micom | |
|
|
|
How to |
| Set a ohmmeter to the 2 housing pin. |
Measure |
| Measure the 2 pin connected to |
| (1) to (2) | |
| below 0.1ohm | |
|
| |
|
| condition, But infinitely great ohm |
|
|
How to |
| Set a ohmmeter to The |
Measure |
| 2housing pin. |
(Sensor) |
| Measure the 2 pin |
|
| connected to Sensor. |
| (1) to (2) | If the ohmmeter indicate 11kΩ |
| (at room temperature) | |
|
| |
|
| Sensor is not a defect. |
|
| When check the ohm at other |
|
| temperature Check |
|
| the sensor manual. |
Standard |
| Sensor (at room temperature) | |||
|
|
|
|
|
|
| Test Point | Ressult |
| Test Point | Ressult |
|
|
|
|
|
|
| (1) to (2) | 0 ~0.1 Ω |
| (1) to (2) | 11 Ω |
|
|
|
|
|
|
- 44 -