
●Door Gasket Removal
1.Remove door frame cover
Starting at the top of cover and working down, snap the cover out and away from the door.
Frame Cover
Handle
Figure 1
2.Remove gasket bracket clips
There are two clips on each door. Start the bracket removal near one of the middle clips.
1)Pull the gasket back to expose the gasket bracket clip and door frame.
2)Insert a flat tip screwdriver into the seam between the gasket bracket and the door frame and pry back until the clips snap out.
3)Continue prying back along the seam until all clips snap out.
Gasket
DoorBracket Clip
Frame
Flat Tip
Screwdriver
Gasket
Bracket
Figure 2
3.Remove gasket
Pull the gasket free from gasket channel on the three remaining sides of door.
Figure 3
●Door Gasket Replacement 1. Insert gasket bracket clips
1)Insert the gasket bracket edge beneath the door frame edge.
2)Turn the upper gasket bracket spring so that the spring ends are in the door channel.
3)Push in the clip until you hear it snap securely into place.
Gasket
Bracket Clip
Spring
Door
Frame
Correct | Figure 4 | Incorrect |
|
|
4)Push in the remaining clip until you hear it snap securely into place.
Note: Make sure that no part of the gasket bracket edge protrudes from beneath the door frame edge.
2. Insert gasket into channel
1) Snap the gasket assembly into the door bracket.
Inserting the Gasket Assembly into the Bracket Door
Correct |
Figure 5 |
Incorrect |
- 54 -