Orion 2xx manual Model Numbers, Enhanced Jupiter Magnetostrictive Transmitter

5.5Model Numbers

5.5.1Enhanced Jupiter Magnetostrictive Transmitter

TRANSMITTER TYPE

2

Enhanced Jupiter Magnetostrictive

OUTPUT

4	LCD display, 4–20 mA & HART, SIL 1
5	LCD display & FOUNDATION Fieldbus™
6	LCD display, 4–20 mA & HART, SIL 2 ➀
7	Interface transmitter, 4–20 mA & HART, with LCD display, 2 floats
8	Interface transmitter, FOUNDATION Fieldbus, with LCD display, 2 floats

HOUSING MATERIAL, MOUNTING AND CONDUIT ENTRY

1	Cast Aluminum, Integral Mount with 3⁄4" NPT Conduit Entry		FM, EP, NI & IS
2	Cast Aluminum, Integral Mount with M20 Conduit Entry		FM, EP,NI & IS
3	316	SS, Integral Mount with 3⁄4" NPT Conduit Entry	FM, EP,NI & IS
4	316	SS, Integral Mount with M20 Conduit Entry	FM, EP,NI & IS
A	Cast aluminum, Integral Mount with 3⁄4" NPT conduit entry		ATEX, EEx d
B	Cast aluminum, Integral Mount with M20 conduit entry		ATEX, EEx d
C	316	SS, Integral Mount with 3⁄4" NPT conduit entry	ATEX, EEx d
D	316 SS, Integral Mount with M20 conduit entry		ATEX, EEx d
E	Cast aluminum, Integral Mount with 3⁄4" NPT conduit entry		ATEX, EEx ia
F	Cast aluminum, Integral Mount with M20 conduit entry		ATEX, EEx ia
G	316	SS, Integral Mount with 3⁄4" NPT conduit entry	ATEX, EEx ia
H	316	SS, Integral Mount with M20 conduit entry	ATEX, EEx ia

CONFIGURATION (see drawings on page 34)

D Direct Insertion, Construction codes 1 through 7

E Top Mount, Construction code 1

F Top Mount Offset, Construction code 1

G Top Mount Offset, high-temperature bend, Construction code 7

H Bottom Mount Offset, Construction code 1

J Bottom Mount Offset, high-temperature bend, Construction code 7

MATERIALS OF CONSTRUCTION

1 316/316L SS (standard), +250° F (+120° C) Maximum (Direct Insertion +200° F (+95°))

7 316/316L SS (high temperature) +500° F (+260° C) Maximum ➁

2 Hastelloy® C, +200° F (+95° C) Maximum ➂

3 Monel®, +200° F (+95° C) Maximum ➂

5 Electropolished 316/316L SS, +200° F (+95° C) Maximum ➂

6 Sanitary 316/316L SS, +200° F (+95° C) Maximum ➂

MOUNTING CONNECTION

See page 29

2

FLOAT	➀
See page 29

PROBE UNITS
E	Inches	➁
M	Centimeters
	INSERTION LENGTH	➂
	See page 30

The bottom 3 inches of SIL 2 direct insertion probes are inactive. The inactive area is used to detect float failure.

Consult factory for process temperatures of 500°–850° F (260°–455° C)

Direct insertion model only. Consult factory for process temperatures above +200° F (+95° C)

46-649 Jupiter Magnetostrictive Transmitter - FOUNDATION fieldbus™ 28