Craftsman 917.270962 owner manual Sparkplugs, Muffler, Clean AIR INTAKE/COOLING Areas, AIR Filter

Page 21

overheating. Clean with a wire brush or compressed air to remove dirt and stubborn dried gum fibers.

CLEAN AIR INTAKE/COOLING AREAS

To insure proper cooling, make sure the grass screen, cooling fins, and other

external sudaces of the engine are kept clean at all times.

Every 100 hours of operation (more often under extremely dusty, dirty conditions), remove the blower housing and other cooling shrouds. Clean the cooling fins and external surfaces as necessary. Make sure the cooling shrouds are reinstalled. NOTE: Operating the engine with a blocked grass screen, dirty or plugged cooling fins, and/or cooling shrouds removed will cause engine damage due to overheating.

AIR FILTER

Your engine will not run properly using a dirty air filter. Clean the foam pre-cleaner after every 25 hours of operation or every season. Service paper cartridge every 100 hours of operation or every season, whichever occurs first.

Service air cleaner more often under dusty conditions.

•Remove knob(s) and cover.

TO SERVICE PRE-CLEANER

•Slide foam we-cleaneroff cartridge.

•Wash it in liquid detergent and water.

•Squeeze it dry in a clean cloth.

•Saturate it in engine oil. Wrap it in

clean, absorbent cloth and squeeze to remove excess oil.

•If very dirty or damaged, replace pre- cleaner.

•Reinstall pre-cleaner over cartridge.

•Reinstall cover and secure with knob(s).

TO SERVICE CARTRIDGE

•Remove wing nuts and cartridge plate.

•Carefully remove cartridge to prevent debris from entering carburetor.

•Clean cartridge by tapping gently on flat surface. If very dirty or damaged, replace cartridge.

•Reinstall cartridge plate, wing nuts, precleaner, cover and secure with

knob(s).

IMPORTANT: Petroleum solvents, such as kerosene, are not to be used to clean the cartridge. They may cause deteriora-

tion of the cartridge. Do not oil cartridge. Do not use pressurized air to clean or dry cartridge.

Cover

Knob

Wing

Plate

Foam Preo

Air Screen

MUFFLER

Inspect and replace corroded muffler and spark arrester (if equipped) as it could create a fire hazard and/or

damage.

SPARKPLUGS

Replace spark plugs at the beginning of each mowing season or after every 100 hours of operation, whichever occurs

first. Spark plug type and gap setting are shown in "PRODUCT SPECIFICATIONS"

section of this manual.

IN-LINE FUEL FILTER

The fuel filter should be replaced once each season. If fuel filter becomes

clogged, obstructing fuel flow to carbure- tor, replacement is required.

•With engine cool, remove filter and plug fuel line sections.

•Place new fuel filter in position in fuel

line with arrow pointing towards carburetor.

° Be sure there are no fuel line leaks and clamps are properly positioned.

•Immediately wipe up any spilled gasoline.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Am 5 pm, Mon Sat Sears Craftsman Help LineLimited 90 DAY Warranty on Battery Limited TWO Year Warranty on Craftsman Riding EquipmentProduct SEARS, Roebuck and CO., D1817 WA, Hoffman ESTATES, ILSlope Operation ServiceBlades and proceed slowly straight Do notTor Maintenance Agreement Product SpecificationsCustomer Responsibilities AboveLocknut 5/16-18 AdapterTo Remove Tractor from Carton Tools Required for AssemblyBefore Removing Tractor from Skid Attach Steering Wheel Unpack CartonCheck Battery HOW to SET UP Your TractorShoulder Bolt Seat To Drive Tractor OFF SkidCheck Tire Pressure Install Mulcher PlateCheck Deck Levelness ALL BeltsWhile Learning HOW to USE Your ChecklistH L Knowyour Tractor AdjustmentFree Wheel Lift Lever Plunger Used toTo SET Parking Brake HOW to USE Your TractorTo USE Throttle Control To Move Forward and BACK- WardTo Adjust Gauge Wheels To Operate MowerTo Operate on Hills To Start Engine AddgasolineTowing Carts and Other Attachments Before Starting the Enigne Check Engine OIL LevelPurge Transmission Automatic Transmission Warm UP1CAUTION Never engage or disen Position. Shut- off engine and set parking brakeMulching Mowing Tips Mowing TipsLubrication Chart General RecommendationsBefore Each USE Brake Operation BatteryBlade Care Blade RemovalClean AIR Screen Sparkplugs Clean AIR INTAKE/COOLING AreasMuffler AIR FilterTo Install Mower CleaningTo Level Mower Housing Tractor To Remove MowerBottom edge LiftLink Adjustment NutBoth Front Links Should be Equal in Length Nut FTo Replace Mower Blade Drive Belt To Adjust BrakeBelt Removal ArmTo Adjust Steering Wheel Alignment Transaxle Motion Control Lever Neutral AdjustmentFront Wheel TOE-IN/CAMBER To Remove Wheel for RepairsReplacing Battery To Start Engine with a Weak BatteryTo Replace Headlight Bulb To Replace FuseTo Adjust Carburetor To Remove Hood and Grill AssemblyTo Adjust Throttle Control Cable To Adjust Choke ControlFinal Setting Acceleration TestIdle Mixture Fuel System EngineWhich leads to separation and formation Engine OILTroubleshooting Chart CauseCorrection Troubleshooting Chart CauseProblem Troubleshooting Chart Tractor - Model Number SchematicElectrical Bolt, Hex 1/4-20 x 3/4 KEY Part NO, NO.DESCRIPTIONTractor - Model Number Chassis and Enclosures Chassis DescriptionDraVear Rod Pivot Chassis/HoodGround Drive Tractor .MODEL Number Tractor - Model Number Ground Drive Tractor - Model Number Steering Assembly Spindle Assembly, L.H FrontAxle AssemblySpindle Assembly, R.H Washer 25/32 x 1-5/8 x 16 GaugeOptional Equipment EngineSpark Arrester 3933162152 140123 Seat 3450 BIk/blk Craftsman 121246X Tractor - Model Number Seat Assembly121248X Washer 13/32 X 1 X 14 GaDecals KEY Part Description Wheels & TiresPart Description 2928 1112 19 j 2O20 Tractor - Model Number Lift Assembly30 150233 Trunnion, Inf. Height Pin Groove32 73540600 Nut Crewnlock 3/8-24 155097 50 110452X Nut, Push Phos. &-OilMower Deck KEY Part NO. noKEY Part Description Tractor - Model Number Hydro Gear Transaxle - Model Number Model Number Hydro Gear Transaxle13= 634 552A 404 o 2201132 859 433 386 j 258 1138 211 877332 934 Gasket SET Housing AssemblyScrew Piston307 94930 Intake 425 94823 Screw Air Cleaner869 870 262924 Seat-Valve Exhaust 432 693492 Cap-Spring 871Page Page Only Ride UP and Down HILL, not Across Hill Sighting GuideSE/ S

917.270962 specifications

The Craftsman 917.270962 is a well-regarded riding mower that offers a blend of performance, reliability, and user-friendly features. Designed for homeowners with medium to large lawns, this mower provides an efficient mowing experience, making lawn care a less daunting task.

One of the standout features of the Craftsman 917.270962 is its powerful engine. Equipped with a robust 19.5 horsepower Briggs & Stratton engine, it delivers ample power for cutting through thick grass and tackling uneven terrain. This engine not only ensures reliable starting and operation but also enhances fuel efficiency, allowing users to cover larger areas without frequent refueling.

The mower’s cutting deck is another highlight, featuring a 42-inch deck that offers a wide cutting path. This size allows for faster mowing times while maintaining precision. The deck is constructed with a durable steel that can withstand the rigors of regular use, ensuring longevity and resilience. The mower also offers a range of cutting heights that can be easily adjusted, allowing users to customize the mowing process according to the height of their grass.

In terms of maneuverability, the Craftsman 917.270962 is built with a tight turning radius, enabling it to navigate around obstacles and tight spaces with ease. The comfortable, adjustable seat ensures that the user can operate the mower for extended periods without discomfort, making lawn care more enjoyable. It also features responsive steering and foot-controlled hydrostatic transmission, which provides a smooth driving experience without the need for manual gear shifting.

User accessibility is further enhanced by the intuitive controls and dashboard display, which offer easy access to essential functions. Safety features, such as the automatic blade stop when the operator leaves the seat, ensure peace of mind during operation.

Additionally, the Craftsman 917.270962 is compatible with a variety of attachments, including baggers and mulch kits, which enhance versatility and allow users to customize their lawn care approach.

Overall, the Craftsman 917.270962 is a reliable riding mower that combines power, efficiency, and user-friendliness, making it an excellent choice for homeowners looking to maintain their lawns effectively and with minimal effort.
Top Page Image Contents