Craftsman 917.270962 owner manual HOW to SET UP Your Tractor, Check Battery, Shoulder Bolt Seat

Page 8

HOW TO SET UP YOUR TRACTOR

CHECK BATTERY

•Lift hood to raised position.

•If this battery is put into service after month and year indicated on label (label located between terminals) charge battery for minimum of one hour at 6-10 amps. (See "BATTERY"

in Maintenance section of this manual for charging instructions).

Label

.,x

tNSTALL SEAT

Adjust seat before tightening adjustment knob.

•Remove adjustment knob and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

•Pivot seat upward and remove from the cardboard packing. Remove the cardboard packing and discard.

•Place seat on seat pan and assemble shoulder bolt. Tighten shoulder bolt securely.

•Assemble adjustment knob and flat washer loosely. Do not tighten.

•Lower seat into operating position and sit on seat.

•Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

•Get off seat without moving its adjusted position.

•Raise seat and tighten adjustment knob securely.

Shoulder Bolt

Seat

Flat Washer

Adjustment Knob

NOTE: You may now roll or drive you tractor off the skid. Follow the appropri- ate instruction below to remove the tractor from the skid.

TO ROLLTRACTOR OFF SKID (See

Operation section for location and function of controls)

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Release parking brake by depressing clutch/brake pedal.

•Place freewheel control in freewheel- ing position to disengage transmission (See "TO TRANSPORT" in the Opera- tion section of this manual).

•Roll tractor forward off skid.

•Remove banding holding discharge guard up against tractor.

TO DRIVE TRACTOR OFF SKID

(See Operation section for location and function of controls)

•ILWARNING: Before starting, read, understand and follow all ins_tructions in

the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

•Be sure all the above assembly steps have been completed.

•Check engine oil level and fill fuel tank with gasoline.

•Place freewheel control in "transmis- sion engaged" position•

•Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

•Place motion control lever in neutral

(N)position.

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Start the engine. After engine has started, move throttle control to idle position.

•Release parking brake.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Sears Craftsman Help Line Am 5 pm, Mon SatLimited TWO Year Warranty on Craftsman Riding Equipment Limited 90 DAY Warranty on BatteryProduct SEARS, Roebuck and CO., D1817 WA, Hoffman ESTATES, ILService Slope OperationBlades and proceed slowly straight Do notTor Product Specifications Maintenance AgreementCustomer Responsibilities AboveAdapter Locknut 5/16-18Tools Required for Assembly To Remove Tractor from CartonBefore Removing Tractor from Skid Attach Steering Wheel Unpack CartonHOW to SET UP Your Tractor Check BatteryShoulder Bolt Seat To Drive Tractor OFF SkidInstall Mulcher Plate Check Tire PressureCheck Deck Levelness ALL BeltsChecklist While Learning HOW to USE YourH L Adjustment Knowyour TractorFree Wheel Lift Lever Plunger Used toHOW to USE Your Tractor To SET Parking BrakeTo USE Throttle Control To Move Forward and BACK- WardTo Operate on Hills To Adjust Gauge WheelsTo Operate Mower Addgasoline To Start EngineTowing Carts and Other Attachments Before Starting the Enigne Check Engine OIL LevelAutomatic Transmission Warm UP Purge Transmission1CAUTION Never engage or disen Position. Shut- off engine and set parking brakeMowing Tips Mulching Mowing TipsBefore Each USE Lubrication ChartGeneral Recommendations Battery Brake OperationBlade Care Blade RemovalClean AIR Screen Clean AIR INTAKE/COOLING Areas SparkplugsMuffler AIR FilterCleaning To Install MowerTo Level Mower Housing Tractor To Remove MowerLiftLink Adjustment Nut Bottom edgeBoth Front Links Should be Equal in Length Nut FTo Adjust Brake To Replace Mower Blade Drive BeltBelt Removal ArmTransaxle Motion Control Lever Neutral Adjustment To Adjust Steering Wheel AlignmentFront Wheel TOE-IN/CAMBER To Remove Wheel for RepairsTo Start Engine with a Weak Battery Replacing BatteryTo Replace Headlight Bulb To Replace FuseTo Remove Hood and Grill Assembly To Adjust CarburetorTo Adjust Throttle Control Cable To Adjust Choke ControlIdle Mixture Final SettingAcceleration Test Engine Fuel SystemWhich leads to separation and formation Engine OILCorrection Troubleshooting ChartCause Problem TroubleshootingChart Cause Troubleshooting Chart Schematic Tractor - Model NumberElectrical KEY Part NO, NO.DESCRIPTION Bolt, Hex 1/4-20 x 3/4Tractor - Model Number Chassis and Enclosures Description ChassisDraVear Rod Pivot Chassis/HoodGround Drive Tractor .MODEL Number Tractor - Model Number Ground Drive Tractor - Model Number Steering Assembly FrontAxle Assembly Spindle Assembly, L.HSpindle Assembly, R.H Washer 25/32 x 1-5/8 x 16 GaugeEngine Optional EquipmentSpark Arrester 3933162152 Tractor - Model Number Seat Assembly 140123 Seat 3450 BIk/blk Craftsman 121246X121248X Washer 13/32 X 1 X 14 GaPart Description Decals KEY Part DescriptionWheels & Tires Tractor - Model Number Lift Assembly 2928 1112 19 j 2O20Pin Groove 30 150233 Trunnion, Inf. Height32 73540600 Nut Crewnlock 3/8-24 155097 50 110452X Nut, Push Phos. &-OilMower Deck KEY Part Description KEY PartNO. no Tractor - Model Number Hydro Gear Transaxle - Model Number Hydro Gear Transaxle Model Number1132 13= 634 552A 404 o220 332 934 859 433 386 j 258 1138 211877 Gasket SET Assembly HousingScrew PistonIntake 425 94823 Screw Air Cleaner 307 94930869 870 262924 Seat-Valve Exhaust 432 693492 Cap-Spring 871Page Page Sighting Guide Only Ride UP and Down HILL, not Across HillSE/ S

917.270962 specifications

The Craftsman 917.270962 is a well-regarded riding mower that offers a blend of performance, reliability, and user-friendly features. Designed for homeowners with medium to large lawns, this mower provides an efficient mowing experience, making lawn care a less daunting task.

One of the standout features of the Craftsman 917.270962 is its powerful engine. Equipped with a robust 19.5 horsepower Briggs & Stratton engine, it delivers ample power for cutting through thick grass and tackling uneven terrain. This engine not only ensures reliable starting and operation but also enhances fuel efficiency, allowing users to cover larger areas without frequent refueling.

The mower’s cutting deck is another highlight, featuring a 42-inch deck that offers a wide cutting path. This size allows for faster mowing times while maintaining precision. The deck is constructed with a durable steel that can withstand the rigors of regular use, ensuring longevity and resilience. The mower also offers a range of cutting heights that can be easily adjusted, allowing users to customize the mowing process according to the height of their grass.

In terms of maneuverability, the Craftsman 917.270962 is built with a tight turning radius, enabling it to navigate around obstacles and tight spaces with ease. The comfortable, adjustable seat ensures that the user can operate the mower for extended periods without discomfort, making lawn care more enjoyable. It also features responsive steering and foot-controlled hydrostatic transmission, which provides a smooth driving experience without the need for manual gear shifting.

User accessibility is further enhanced by the intuitive controls and dashboard display, which offer easy access to essential functions. Safety features, such as the automatic blade stop when the operator leaves the seat, ensure peace of mind during operation.

Additionally, the Craftsman 917.270962 is compatible with a variety of attachments, including baggers and mulch kits, which enhance versatility and allow users to customize their lawn care approach.

Overall, the Craftsman 917.270962 is a reliable riding mower that combines power, efficiency, and user-friendliness, making it an excellent choice for homeowners looking to maintain their lawns effectively and with minimal effort.
Top Page Image Contents