Craftsman 917.27084 manual Check Tire Pressure, Check Deck Levelness, Check Brake System

Page 11

ASSEMBLE GAUGE WHEELS TO MOWqR DECK

The gauge wheels are designed to keep the mower deck in proper position when operating mower. Be sure they are p_per-

ly adjusted to ensure optimum mower per- formance.

•Assemble gauge wheels with tractor on a flat level surface.

•Adjust mower to desired cutting height (See "TO ADJUST MOWER CUTTING HEIGHT" in the Operation section of this manual).

•With mower in desired height of cut po- sition, gauge wheels should be assem- bled so they are slightly off the ground. Install gauge wheel in appropriate hole with shoulder bolt, 3/8 washer, and 3/8- 16 Iocknut and tighten securely.

•Repe_at for opposite side installing gauge wheel in same adjustment hole.

Gauge Wheel

Bracket \ -.

Bolt

3/8-16 Washer

e Wheel

CHECK TIRE PRESSURE

The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

•Reduce tire pressure to PSI shown in

=PRODUCT SPECIFICATIONS" on page 5 of this manual.

CHECK DECK LEVELNESS

For best cutting results, mower housing should be properly leveled. See "TO

LEVEL MOWER HOUSING" in the

Service and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replac- ing motion and mower blade drive belts in the Service and Adjustments sectoin of this manual. Verify that the belts are rout- ed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your trac- tor, check to see that the brake is preperl 1 adjusted. See "TO ADJUST BRAKE" in the Service and Adjustments section of this manual.

v"CHECKLIST

PLEASE REVIEW THE FOLLOWING CHECKLIST:

v' All assembly instructions have been completed.

No remaining loose parts in carton. v' Battery is properly prepared and

charged. (Minimum 1 hour at 6 amps). V' Seat is adjusted comfortably and

tightened securely.

_' AU tires are propedy inflated. (For shipping purposes, the tires were- overinflated at the factory).

v' Be sure mower deck is properly levele_ side-to-side/front-to-rear for best

cutting results. (Tires must be properly inflated for leveling).

v' Check mower and drive belts. Be sure

they are routed properly around pulley: and inside all belt keepers.

v' Check wiring. See that all connections are still secure and wires are properly clamped.

Before driving tractor, be sure free- wheel control is in drive position.

WHILE LEARNING HOWTO USE YOUR TRACTOR, PAY EXTRA ATTENTION TO THE FOLLOWING IMPORTANT ITEMS:

4" Engine oil is at proper level.

4' Fuel tank is filled with fresh, clean, regular unleaded gasoline.

•/ Become familiar with all controls - their

location and function. Operate them before you start the engine.

/Be sure brake system is in safe operat ing condition.

/It is important to purge the transmis- sion before operating your tractor for the first time. Follow proper starting and transmission purging instructions (See "TO START ENGINE" and

"PURGE TRANSMISSION" in the Op eration section of this manual).

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Sears Craftsman Help Line 5 am 5 pm, Mon- Sat CRAFTSMAN+Limited 90 DAY Warranty on Battery Repair Parts Parts Ordering Back CoverSafety Product SpecificationsDo not ServiceChildren Slope OperationTY is Involved Maintenance Agreement Product SpecificationsHex BoAt Parts Bag contents shown full sizeHex Bolt 5116-18 x 1-1/4 16 xParts packed separately in carton Parts Bag contents not shown full sizeBefore Rolling Tractor OFF Skid Tools Required for AssemblyAdjustment Knob HOW to SET UP Your TractorCheck Battery Install SeatHooks To Convert to Bagging or DischargingCheck Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsH L Page Engine HOW to USE Your TractorMower Blades Ground DriveTo Operate on Hills Towing Carts and Other AttachmentsTo Transport To Operate MowerBefore Starting the Engine RGE Transmission Mowing TipsBe sure the tractor is on level ground Avoid cutting your lawn when it is wet Before Each USE Lubrication ChartMaintenance Schedule Customer ResponsibilitiesTo Sharpen Blade BrakeoperationEngine Engine Cooling RNS To Service PRE-CLEANERTo Service Cartridge AIR FilterTo Remove Mower CleaningTo Install Mower Fuel FilterTo Replace Mower Blade Drive To LevelmowerhousingSIDE-TO-SIDE Adjustment FRONT-TO-BACK AdjustmentEngine Pulley Clutching Idler BeltinstallationTo Adjust Brake To Replace Motion Drive Belt StationaryIdler TransmissionTo Remove Wheel for Repairs To Start Engine with a Weak BatteryRRANSMISSION REMOVAL/REPLACE- Ient Front Wheel TOE-IN/CAMBERInterlocks and Relays Replacing BatteryTo Remove CABLES, Reverse Order To Replace Headlight BulbFinal Setting To Adjust Throttle Control CableTo Adjust Choke Control To Adjust CarburetorFuel System Acceleration TestTractor Other CylindersCorrection Roubleshooting ChartProblem Cause Problem Troubleshooting ChartSure Reinstall blades sharp edgeBattery will not charge Loss of ddve Check tires for proper air presTractor --MODEL Number Electrical KEY Part Description Tractor - Model NumberTractor - Model Number Chassis and Enclosures KEY Part NO. NO.DESCRIPTION Tractor - Model Number Chassis and EnclosuresTractor - Model Number Rounddrive Ground Drive KEY Part Description TRACTOR- Model NumberGaLe Bo,ngTractor - Model Number Steeringassembly KEY Part Description Tractor - Model Number Steering AssemblySpark Arrester NgineOptional Equipment Inch 25A mm Engine KEY Part DescriptionOarm Hose B KEY Part Tractor - Model Number 917.270840 SeatassemblySpacers128 x 9snc KEY Part NO. noOne DecalsTractor -- Model Number Wheels & Tires1718 15 ,.\ 16\\ Tractor - Model Number IFT AssemblyTractor - Model Number Lift Assembly Tractor - Model Number Mower Deck Ang, Ball Ng. pTractor - Model Number Iydro Gear Transaxle - Model Number Tractor - Model Number Hydro Gear Transaxle - Model Number 2set 11010LABELKrr J 5i7,2,2 o3 634 513 803797A797 544801 Gasket SETSeal-Oil Spring-ValveExhaustKEY Part NO. NO. Description BodyTW,N CYL Bigines SchematicPage Only Ride UP and Down Hill Not Across Hill Suggested Guide for Sighting Slopes for Safe OperationSears

917.27084 specifications

The Craftsman 917.27084 is a versatile lawn tractor that represents the brand's commitment to quality, performance, and ease of use. Known for its powerful engine and user-friendly design, the Craftsman 917.27084 is an ideal choice for homeowners looking to maintain their lawns with efficiency and precision.

At the heart of the 917.27084 is a robust 24 horsepower Briggs & Stratton engine. This engine provides ample power for various mowing tasks while ensuring durability and reliability. The engine is equipped with a hydrostatic transmission system, allowing for smooth acceleration and effortless control, making it easier to navigate around obstacles and tight spaces in your yard.

One of the standout features of the Craftsman 917.27084 is its cutting deck. It boasts a 42-inch cutting width, allowing for efficient mowing of medium to large-sized lawns. The deck is adjustable to multiple cutting heights, giving users the flexibility to achieve their desired lawn appearance. This adaptability is particularly beneficial for those who prefer a well-manicured lawn or want to tailor the cut for different grass types or seasonal needs.

The tractor also includes a comfortable and spacious operator's seat, which is designed for extended use without causing fatigue. The ergonomic steering wheel and control layout further enhance the user experience by making it easy to maneuver the tractor.

Safety is a critical concern with any lawn equipment, and the Craftsman 917.27084 does not disappoint. It includes features such as an automatic safety shut-off system that activates the engine when the operator leaves the seat, minimizing the risk of accidents. Additionally, the front and rear wheels are designed with enhanced traction, ensuring stability on various terrains.

Furthermore, the Craftsman 917.27084 incorporates advanced technology for improved performance. The Easy Start system means that users can quickly get the engine running without hassle. The maintenance-free battery and integrated LED headlights add convenience and increase usability, making it easier to mow at any time of day or in low-light conditions.

Overall, the Craftsman 917.27084 combines power, comfort, and advanced features, making it a reliable choice for lawn care enthusiasts. Whether you have a small yard or a larger property, this lawn tractor provides the right balance of performance and user-friendly design. It’s an investment that simplifies lawn maintenance, allowing you to spend less time mowing and more time enjoying your outdoor space.
Top Page Image Contents