Craftsman 917.27084 manual Fuel Filter, Cleaning, To Remove Mower, To Install Mower

Page 23

ClampClamp

Fuel Filter

CLEANING

•Clean engine, battery, seat, finish, etc. of all foreign matter.

•Keep finished surfaces and wheels free of all gasoline, oil, etc.

•Protect painted surfaces with automo-

tive type wax.

We do not recommend using a garden hose to clean your tractor unless the elec- trical system, muffler, air filter and carbure- tor are covered to keep water out. Water

in engine can result in a shortened engine life.

_,CAUTION: Before performing any service or adjustments:

•Depress clutch/brake pedal fully and set parking brake.

•Place motion control lever in neutral (N) position.

•Place attachment clutch in =DISENGAGED" position.

•Tum ignition key "OFF" and remove key.

•Make sure the blades and all moving parts have completely stopped.

•Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TO REMOVE MOWER

Mower will be easier to remove from the right side of tractor.

•Place attachment clutch in "DISEN- GAGED" position.

•Move attachment lift lever forward to lower mower to its lowest position.

•Roll belt off engine pulley.

•Disconnect clutch red from clutch lever by removing retainer spring.

•Disconnect anti-swaybar from chassis bracket by removing retainer spring.

•Disconnect suspension arms from rear

deck brackets by removing retainer springs.

Suspe_on

Arms

Retainer

Spring

AntJ-Swaybar

•Disconnect front links from deck by removing retainer springs.

•Raise lift lever to raise suspension arms. Slide mower out from under trac- tor.

IMPORTANT: If an attachment other than the mower deck is to be mounted on the tractor, remove the front links.

TO INSTALL MOWER

•Raise attachment lift leverto its highest position.

•Slide mower under tractor with dis- charge guard to right side of tractor.

•Lower lift lever to its lowest position.

•Install mower in reverse order of removal instructions.

Retainer

Engine Pulley

•Front Link

;pdngs

(BothSides)

;pdngs

(Both Sides)

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Sears Craftsman Help Line 5 am 5 pm, Mon- Sat CRAFTSMAN+Limited 90 DAY Warranty on Battery Repair Parts Parts Ordering Back CoverSafety Product SpecificationsDo not ServiceChildren Slope OperationTY is Involved Maintenance Agreement Product SpecificationsHex BoAt Parts Bag contents shown full sizeHex Bolt 5116-18 x 1-1/4 16 xParts packed separately in carton Parts Bag contents not shown full sizeBefore Rolling Tractor OFF Skid Tools Required for AssemblyAdjustment Knob HOW to SET UP Your TractorCheck Battery Install SeatHooks To Convert to Bagging or DischargingCheck Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsH L Page Engine HOW to USE Your TractorMower Blades Ground DriveTo Operate on Hills Towing Carts and Other AttachmentsTo Transport To Operate MowerBefore Starting the Engine RGE Transmission Mowing TipsBe sure the tractor is on level ground Avoid cutting your lawn when it is wet Before Each USE Lubrication ChartMaintenance Schedule Customer ResponsibilitiesTo Sharpen Blade BrakeoperationEngine Engine Cooling RNS To Service PRE-CLEANERTo Service Cartridge AIR FilterTo Remove Mower CleaningTo Install Mower Fuel FilterTo Replace Mower Blade Drive To LevelmowerhousingSIDE-TO-SIDE Adjustment FRONT-TO-BACK AdjustmentEngine Pulley Clutching Idler BeltinstallationTo Adjust Brake To Replace Motion Drive Belt StationaryIdler TransmissionTo Remove Wheel for Repairs To Start Engine with a Weak BatteryRRANSMISSION REMOVAL/REPLACE- Ient Front Wheel TOE-IN/CAMBERInterlocks and Relays Replacing BatteryTo Remove CABLES, Reverse Order To Replace Headlight BulbFinal Setting To Adjust Throttle Control CableTo Adjust Choke Control To Adjust CarburetorFuel System Acceleration TestTractor Other CylindersCorrection Roubleshooting ChartProblem Cause Problem Troubleshooting ChartSure Reinstall blades sharp edgeBattery will not charge Loss of ddve Check tires for proper air presTractor --MODEL Number Electrical KEY Part Description Tractor - Model NumberTractor - Model Number Chassis and Enclosures KEY Part NO. NO.DESCRIPTION Tractor - Model Number Chassis and EnclosuresTractor - Model Number Rounddrive Ground Drive KEY Part Description TRACTOR- Model NumberGaLe Bo,ngTractor - Model Number Steeringassembly KEY Part Description Tractor - Model Number Steering AssemblySpark Arrester NgineOptional Equipment Inch 25A mm Engine KEY Part DescriptionOarm Hose B KEY Part Tractor - Model Number 917.270840 SeatassemblySpacers128 x 9snc KEY Part NO. noOne DecalsTractor -- Model Number Wheels & Tires1718 15 ,.\ 16\\ Tractor - Model Number IFT AssemblyTractor - Model Number Lift Assembly Tractor - Model Number Mower Deck Ang, Ball Ng. pTractor - Model Number Iydro Gear Transaxle - Model Number Tractor - Model Number Hydro Gear Transaxle - Model Number 2set 11010LABELKrr J 5i7,2,2 o3 634 513 803797A797 544801 Gasket SETSeal-Oil Spring-ValveExhaustKEY Part NO. NO. Description BodyTW,N CYL Bigines SchematicPage Only Ride UP and Down Hill Not Across Hill Suggested Guide for Sighting Slopes for Safe OperationSears

917.27084 specifications

The Craftsman 917.27084 is a versatile lawn tractor that represents the brand's commitment to quality, performance, and ease of use. Known for its powerful engine and user-friendly design, the Craftsman 917.27084 is an ideal choice for homeowners looking to maintain their lawns with efficiency and precision.

At the heart of the 917.27084 is a robust 24 horsepower Briggs & Stratton engine. This engine provides ample power for various mowing tasks while ensuring durability and reliability. The engine is equipped with a hydrostatic transmission system, allowing for smooth acceleration and effortless control, making it easier to navigate around obstacles and tight spaces in your yard.

One of the standout features of the Craftsman 917.27084 is its cutting deck. It boasts a 42-inch cutting width, allowing for efficient mowing of medium to large-sized lawns. The deck is adjustable to multiple cutting heights, giving users the flexibility to achieve their desired lawn appearance. This adaptability is particularly beneficial for those who prefer a well-manicured lawn or want to tailor the cut for different grass types or seasonal needs.

The tractor also includes a comfortable and spacious operator's seat, which is designed for extended use without causing fatigue. The ergonomic steering wheel and control layout further enhance the user experience by making it easy to maneuver the tractor.

Safety is a critical concern with any lawn equipment, and the Craftsman 917.27084 does not disappoint. It includes features such as an automatic safety shut-off system that activates the engine when the operator leaves the seat, minimizing the risk of accidents. Additionally, the front and rear wheels are designed with enhanced traction, ensuring stability on various terrains.

Furthermore, the Craftsman 917.27084 incorporates advanced technology for improved performance. The Easy Start system means that users can quickly get the engine running without hassle. The maintenance-free battery and integrated LED headlights add convenience and increase usability, making it easier to mow at any time of day or in low-light conditions.

Overall, the Craftsman 917.27084 combines power, comfort, and advanced features, making it a reliable choice for lawn care enthusiasts. Whether you have a small yard or a larger property, this lawn tractor provides the right balance of performance and user-friendly design. It’s an investment that simplifies lawn maintenance, allowing you to spend less time mowing and more time enjoying your outdoor space.
Top Page Image Contents