Craftsman 917.27084 manual Towing Carts and Other Attachments, To Transport, To Operate Mower

Page 15

Turn knob clockwise (G) to raise cutting height.

Turn knob counterclockwise (,b)to

lower cutting height.

The cutting height range is approximately 1-1/2" to 4". The heights are measured from the ground to the blade tip with the engine not running. These heights are ap-

proximate and may vary depending upon soil conditions, height of grass andtypes

of grass being mowed.

The average lawn should be cut to approximately 2-1/2 inches during the cool season and to over 3 inches during hot months. For healthier and better looking lawns, mow often and after moderate growth.

For best cutting performance, grass over 6 inches in height should be mowed twice. Make the first cut rela-

tively high; the second to desired height.

TO OPERATE MOWER

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut oft the engine.

Select desired height of cut.

Lower mower with attachment lift con- trol.

Start mower blades by engaging attach- ment clutch control.

TO STOP MOWER BLADES ; disen- gage attachment clutch control.

Attachment Clutch Attachment Lift

Lever "Engaged" Lever High Position Position

"Disengaged";"

Low

Position

If slowing is necessary, move throttle control lever;to slower position.

If stopping islabsolutely necessary, push clutch/brake pedal quickly to brake posi- tion and engage parking brake.

Move motion control lever to neutral (N)

position.

IMPORTANT: "rhe motion control lever

does not return to neutral (N) position when the clutch/brake pedal is depressed.

To restart movement, slowly release parking brake and clutch/brake pedal.

Slowly move motion control lever to slowest setting.

Make all turns slowly.

TO TRANSPORT

When pushing or towing your tractor, be sure to disengage transmission by placing

freewheel control in freewheeling position. Freewheel control is located at the rear

drawbar of tractor.

Raise attachment lift to highest position with attachment lift control.

Pull freewheel control knob out and hold

in position by inserting retainer spring into forward hole of contro_ rod.

Do not push or tow tractor at more than two (2) MPH.

To reengage transmission, reverse

above procedure.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

TO OPERATE ON HILLS

_,CAUTION: Do not drive up or down hills with slopes greater than 15 ° and do not drive across any slope. Use the slope guide provided at the back of this manual.

ChoG._ the slowest speed before start- ing up or down hills.

Avoid stopping or changing speed on hills.

TOWING CARTS AND OTHER ATTACHMENTS

Tow only the attachments that are recom- mendedby and comply with specifications of the manufacturer of your tractor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous.

Tires can lose traction with the ground and cause you to lose control of your tractm.

15

Image 15
Contents Sears Craftsman Help Line 5 am 5 pm, Mon- Sat CRAFTSMAN+Limited 90 DAY Warranty on Battery Repair Parts Parts Ordering Back CoverSafety Product SpecificationsDo not ServiceChildren Slope OperationTY is Involved Maintenance Agreement Product SpecificationsHex BoAt Parts Bag contents shown full sizeHex Bolt 5116-18 x 1-1/4 16 xParts packed separately in carton Parts Bag contents not shown full sizeBefore Rolling Tractor OFF Skid Tools Required for AssemblyAdjustment Knob HOW to SET UP Your TractorCheck Battery Install SeatHooks To Convert to Bagging or DischargingCheck Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsH L Page Engine HOW to USE Your TractorMower Blades Ground DriveTo Operate on Hills Towing Carts and Other AttachmentsTo Transport To Operate MowerBefore Starting the Engine Mowing Tips Be sure the tractor is on level groundRGE Transmission Avoid cutting your lawn when it is wet Before Each USE Lubrication ChartMaintenance Schedule Customer ResponsibilitiesTo Sharpen Blade BrakeoperationEngine Engine Cooling RNS To Service PRE-CLEANERTo Service Cartridge AIR FilterTo Remove Mower CleaningTo Install Mower Fuel FilterTo Replace Mower Blade Drive To LevelmowerhousingSIDE-TO-SIDE Adjustment FRONT-TO-BACK AdjustmentEngine Pulley Clutching Idler BeltinstallationTo Adjust Brake To Replace Motion Drive Belt StationaryIdler TransmissionTo Remove Wheel for Repairs To Start Engine with a Weak BatteryRRANSMISSION REMOVAL/REPLACE- Ient Front Wheel TOE-IN/CAMBERInterlocks and Relays Replacing BatteryTo Remove CABLES, Reverse Order To Replace Headlight BulbFinal Setting To Adjust Throttle Control CableTo Adjust Choke Control To Adjust CarburetorAcceleration Test TractorFuel System Other CylindersRoubleshooting Chart Problem CauseCorrection Problem Troubleshooting ChartSure Reinstall blades sharp edgeBattery will not charge Loss of ddve Check tires for proper air presTractor --MODEL Number Electrical KEY Part Description Tractor - Model NumberTractor - Model Number Chassis and Enclosures KEY Part NO. NO.DESCRIPTION Tractor - Model Number Chassis and EnclosuresTractor - Model Number Rounddrive Ground Drive KEY Part Description TRACTOR- Model NumberGaLe Bo,ngTractor - Model Number Steeringassembly KEY Part Description Tractor - Model Number Steering AssemblyNgine Optional EquipmentSpark Arrester Engine KEY Part Description Oarm Hose BInch 25A mm KEY Part Tractor - Model Number 917.270840 SeatassemblySpacers128 x 9snc KEY Part NO. noOne DecalsTractor -- Model Number Wheels & Tires1718 15 ,.\ 16\\ Tractor - Model Number IFT AssemblyTractor - Model Number Lift Assembly Tractor - Model Number Mower Deck Ang, Ball Ng. pTractor - Model Number Iydro Gear Transaxle - Model Number Tractor - Model Number Hydro Gear Transaxle - Model Number 2set 11010LABELKrr J 5i7,2,2 o3 634 513 803797A797 544801 Gasket SETSeal-Oil Spring-ValveExhaustKEY Part NO. NO. Description BodyTW,N CYL Bigines SchematicPage Only Ride UP and Down Hill Not Across Hill Suggested Guide for Sighting Slopes for Safe OperationSears

917.27084 specifications

The Craftsman 917.27084 is a versatile lawn tractor that represents the brand's commitment to quality, performance, and ease of use. Known for its powerful engine and user-friendly design, the Craftsman 917.27084 is an ideal choice for homeowners looking to maintain their lawns with efficiency and precision.

At the heart of the 917.27084 is a robust 24 horsepower Briggs & Stratton engine. This engine provides ample power for various mowing tasks while ensuring durability and reliability. The engine is equipped with a hydrostatic transmission system, allowing for smooth acceleration and effortless control, making it easier to navigate around obstacles and tight spaces in your yard.

One of the standout features of the Craftsman 917.27084 is its cutting deck. It boasts a 42-inch cutting width, allowing for efficient mowing of medium to large-sized lawns. The deck is adjustable to multiple cutting heights, giving users the flexibility to achieve their desired lawn appearance. This adaptability is particularly beneficial for those who prefer a well-manicured lawn or want to tailor the cut for different grass types or seasonal needs.

The tractor also includes a comfortable and spacious operator's seat, which is designed for extended use without causing fatigue. The ergonomic steering wheel and control layout further enhance the user experience by making it easy to maneuver the tractor.

Safety is a critical concern with any lawn equipment, and the Craftsman 917.27084 does not disappoint. It includes features such as an automatic safety shut-off system that activates the engine when the operator leaves the seat, minimizing the risk of accidents. Additionally, the front and rear wheels are designed with enhanced traction, ensuring stability on various terrains.

Furthermore, the Craftsman 917.27084 incorporates advanced technology for improved performance. The Easy Start system means that users can quickly get the engine running without hassle. The maintenance-free battery and integrated LED headlights add convenience and increase usability, making it easier to mow at any time of day or in low-light conditions.

Overall, the Craftsman 917.27084 combines power, comfort, and advanced features, making it a reliable choice for lawn care enthusiasts. Whether you have a small yard or a larger property, this lawn tractor provides the right balance of performance and user-friendly design. It’s an investment that simplifies lawn maintenance, allowing you to spend less time mowing and more time enjoying your outdoor space.