MAINTENANCE AND REPAIR INSTRUCTIONS
AIR FILTER
CAUTION: NEVER operate blow- er without the air fil-
ter. The air filter must be kept clean. If it becomes damaged, install a new filter.
To Clean Air Filter:
1.Loosen knob (A) holding air filter cover in place, remove cover (B) and lift filter (C) from air box (Figure 20 & Figure 21).
2.Wash filter in soap and water. DO NOT USE GASO-
LINE!
3.Air dry filter.
4.Reinstall filter.
NOTE: Replace filter if frayed, torn, damaged or unable to be cleaned.
B
A
Fig. 20
C
Fig. 21
FUEL CAP / FUEL FILTER
CAUTION: Remove fuel from unit and store in approved
container before starting this procedure. Open fuel cap slowly to release any pressure which may have formed in fuel tank.
NOTE: Keep vent (A) on fuel cap clean of debris (Figure 22).
Fuel Filter:
1.Completely remove fuel cap from fuel tank (B) to be able to remove fuel filter (C) from tank. Use a piece of wire (C) with a hook formed at the end to pull filter out of tank. (Figure 23)
2.Pull filter (D) off with a twisting motion. (Figure 24)
3.Replace fuel filter (D). (Figure 24)
NOTE: Never operate the blower without the fuel filter. Internal engine damage could result!
A
Fig. 22
C
B
Fig. 23
D
Fig. 24
IDLE ADJUSTMENT
The carburetor was
14