Craftsman 316.794991 manual Assembly Instructions, Attach Flex Tube, Attach Operating Tube

ASSEMBLY INSTRUCTIONS

ATTACH FLEX TUBE

Put the hose clamp(C) on the flex tube before connect- ing the flex tube and the fan’s outlet tube together.

Connect the flex tube (B) to the fan’s outlet tube (A) (Fig.

1)with a hose clamp (C) (Fig. 2) and tighten securely (Fig. 2).

B

A

Fig. 1

B

D

F

180˚

E

Fig. 3

G

Fig. 4

C

Fig. 2

ATTACH OPERATING TUBE

NOTE: keep the throttle cable as straight as possible when connecting the blower tubes.

1.Place the unit on flat surface during assembly. Insure screw mechanism of clamp is positioned away from operator.

2.Put the hose clamp(C) on the flex tube and the oper- ating tube together.

3.Turn the rotary ring mark(D) so it aligns with the throt- tle handle (F). Insert the operating tube (E) into the flex tube (B) (Fig. 3) and then tighten securely with a hose clamp (G)(Fig. 4).

4.Attached throttle linkage clips (# 24-know your blow- er) - to both ends of the flex tube to secure the throt- tle cable. ( See Fig. 5 and Fig. 6)

THROTTLE LINKAGE CLIPS

Fig. 5

THROTTLE LINKAGE

CLIPS

Fig. 6

9