Craftsman 316.794991 manual OIL and Fuel Information, OIL and Fuel Mixing Instructions

Page 8

OIL AND FUEL INFORMATION

OIL AND FUEL MIXING INSTRUCTIONS

Old and/or improperly mixed fuel are the main reasons for the unit not running properly. Be sure to use fresh, (less than 60 days old) clean unleaded fuel. Follow the instructions carefully for the proper fuel/oil mixture.

Definition of Blended Fuels

Today's fuels are often a blend of gasoline and oxy- genates such as ethanol, methanol, or MTBE (ether). Alcohol-blended fuel absorbs water. As little as 1% water in the fuel can make fuel and oil separate and leads to formation of acids during storage. When using alcohol- blended fuel, use fresh fuel.

Using Blended Fuels

If you choose to use a blended fuel, or its use is unavoid- able, follow recommended precautions:

Always use the fresh fuel mix explained in your opera- tor's manual

Always agitate the fuel mix before fueling the unit

Drain the tank and run the engine dry before storing the unit

Using Fuel Additives

The bottle of 2-cycle oil that came with your unit contains a fuel additive which will help inhibit corrosion and mini- mize the formation of gum deposits. It is recommended that you use our 2-cycle oil with this unit.

If unavailable, use a good 2-cycle oil designed for air-cooled engines along with a fuel additive, such as STA-BIL®Gas Stabilizer or an equivalent. Add 0.8 oz.

(23 ml.) of fuel additive per gallon of fuel according to the instructions on the container. NEVER add fuel additives directly to the unit's fuel tank.

CAUTION: For proper engine operation and maxi-

mum reliability, pay strict attention to the oil and fuel mixing instructions on the

2-cycle oil container. Using improperly mixed fuel can severely damage the engine.

To Obtain Correct Fuel Mix:

Thoroughly mix the proper ratio of 2-cycle engine oil with unleaded gasoline in a separate fuel can. Use a 40:1 fuel/oil ratio. Do not mix them directly in the engine fuel tank. See the table below for specific gas and oil mixing ratios.

NOTE: One gallon (3.8 liters) of unleaded gasoline mixed with one 3.2 oz. (95 ml.) bottle of

 

 

 

 

 

 

 

 

 

 

 

 

 

+

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

UNLEADED GAS

 

 

2 CYCLE OIL

 

 

 

 

1 GALLON US

 

 

3.2 FL. OZ.

 

(3.8 LITERS)

 

 

(95 ml)

 

 

 

 

 

 

 

 

1 LITER

 

 

25 ml

 

 

 

 

 

 

 

 

MIXING RATIO - 40:1

WARNING: Gasoline is extremely flamma-

ble. Ignited Vapors may explode. Always stop the engine and allow it to cool before filling the fuel tank. Do not smoke while fill- ing the tank. Keep sparks and open flames at a distance from the area.

WARNING: Remove fuel cap slowly to avoid injury

from fuel spray. Never operate the unit without the fuel cap securely in place.

WARNING: Add fuel in a clean, well ventilated out-

door area. Wipe up any spilled fuel immedi- ately. Avoid creating a source of ignition for spilled fuel. Do not start the engine until fuel vapors dissipate.

2-cycle oil makes a 40:1 fuel/oil ratio.

NOTE: Dispose of the old fuel/oil mix in accordance to Federal, State and Local regulations.

8

Image 8
Contents Operator’s Manual Table of Contents Warranty StatementRead ALL Instructions Before Operating Fuel Safety WarningsRules for Safe Operation While Operating Other Safety Warnings Safety and International Symbols Know Your Blower Blower ComponentsOIL and Fuel Information OIL and Fuel Mixing InstructionsAttach Operating Tube Assembly InstructionsAttach Flex Tube Attach Intermediate Tube and CON- Centrator Nozzle Adjust Back Pack Harness and Control HandleSTARTING/STOPPING Instructions Important Idling Information Stopping the EngineOperation Instructions Operating InstructionsBlower Operations Maintenance and Repair Instructions Maintenance ScheduleMaintenance Checklist HoursFuel CAP / Fuel Filter Idle AdjustmentAIR Filter Spark Arrestor Screen Collar Assembly Spark PlugStorage Removing a Unit from StorageTroubleshooting Blower SpecificationsEngine Parts List Parts No DescriptionEPA Emission Control Warranty Statement Page Manual del usuario Índice Declaración DE GarantíaAdvertencia DE LA Proposición 65 DEL Estado DE California Nota Sobre EL Aspirador DE ChispasAlerta DE Seguridad Reglas DE Funcionamiento SeguroEN Funcionamiento Conserve Estas Instrucciones Advertencia Conozca SU Sierra Componentes DEL SopladorInformación Sobre Aceite Y Combustible Mezcla DE Gasolina Y EngraseConexión DE Tubo Operativo Instrucciones DE EnsamblajeConexión DEL Tubo Flexible Ajuste DEL Arnés DE Mochila Y MANI- JA DE Control Instrucciones DE Arranque / ParadaConecte EL Tubo Intermedio Y EL Inyector Concentrador Información Importante Sobre Ralentí Instrucciones DE Funcionamiento Instrucciones OperativasOperaciones DE Soplado Agenda DE Mantenimiento Lista DE MantenimientoHoras DE FUN Cada USO Cionamiento Elemento Antes DE Cada USOInstrucciones DE Mantenimiento Y Reparación Filtro DE AireTapa DE Combustible / Filtro DE COM- Bustible Ajuste DE RalentíBujía Pantalla DEL Aspirador DE Chispas / Anilla DE EnsamblajeAlmacenamiento Utilizar UNA Unidad AlmacenadaResolución DE Problemas Soplador EspecificacionesMotor Lista DE Piezas JuntaDeclaración de Garantía de Control de Emisiones EPA Acuerdo de Protección de Reparaciones Arréglelo, en su casa o en la nuestra