Craftsman 316.794830 manual Assembling Unit

ASSEMBLING UNIT

Installing Blower Tube

WARNING: To prevent serious personal injury, stop theorremovingengineandtubesow.athe mpe er to stop before attach ng

damage to the unit, the blower tube must be installed I

_ll WARNING: To prevent serious personal injury or while operating this unit.

1.Align the bump on the end of the blower tube with the bump slot on the bottom end of the blower outlet (Fig. 1).

Blower Outlet

Blower Tube

Bump

Slot

Bump

Fig. 1

2.Insert the bump on the blower tube into the bump slot on the blower outlet (Fig. 1).

3.Twist the blower tube clockwise inside the blower outlet until the bump locks into place (Fig. 2).

Blower Outlet

Blower

Tube

\

Fig. 2

3.Twist the nozzle clockwise over the blower tube until tight (Fig. 4).

Nozzle	or
Curved	Tube	Blower Tube

Fig. 4

Removing the Blower Tube

1.Hold the unit firmly.

2.Insert a flathead screwdriver into the Tube Lock. Twist the screwdriver counterclockwise 1/4 turn and hold it there (Fig. 5).

Tu

Fig. 5

3.While holding the screwdriver in a counterclockwise position, grasp the blower tube and twist it counterclockwise (Fig. 5).

4.Pull the blower tube from the blower outlet.

Removing the Nozzle/Curved Tube

1.Hold the blower tube firmly.

2.Grasp the nozzle and twist it counterclockwise until the nozzle unlocks from the blower tube (Fig. 6).

3.Remove the nozzle from the blower tube.

Installing Nozzle/Curved Tube

1.Align the bump on the end of the blower tube with the bump slot on the bottom end of the blower outlet (Fig. 3).

2.Insert the bump on the blower tube into the bump slot on the nozzle (Fig. 3).

Nozzle or	Blower Tube
Curved Tube

Nozzle

Fig. 6

Blower

Tube

Bump

Bump

Slot

Fig. 3

6