Craftsman 316.794830 manual Starting Instructions, Stopping Instructions

Page 8

 

I

 

I_

ventilated outdoor area. Carbon monoxide exhaust

fumes can be lethal in a confined area.

WARNING:

Operate this unit only in a well-

WARNING: Avoid accidental starting. Make sure you are in the starting position when pulling the starter rope (Fig. 13). To avoid serious injury, the operator and unit must be in a stable position while starting.

To avoid serious personal injury, make sure that the blower tube is locked in place or firmly installed.

STARTING INSTRUCTIONS

1, Check the oil level in the crankcase. Refer to Checking the Oil Level.

2.Fill the fuel tank with fresh, clean unleaded gasoline. Refer to Fueling the Unit.

Fully press and release the primer bulb 10 times, slowly. Some amount of fuel should be visible in the primer bulb and fuel lines (Fig. 11). If you can't see fuel in the bulb, press and release the bulb as many times as it takes before you can see fuel in it.

4.Place the choke lever in Position 1 (Fig. 12).

NOTE: The unit should be started in idle speed. Do not squeeze the trigger while starting (Fig. 13).

5.Crouch in the starting position (Fig. 13) and pull the starter rope out until you feel some resistance. This is usually around 2-4 inches. Pull 4 times in smooth and rapid pulls.

6.Place the choke lever in Position 2 (Fig. 13).

7, Pull the starter rope briskly 1 to 4 times to start the engine.

8.Squeeze the throttle trigger and allow the engine to warm up for 30 to 60 seconds.

9.Place the choke lever in Position 3 (Fig. 13). The unit is ready for use.

.................IF the engine does not start, go back to step 3.

IF... the engine fails to start after a few attempts, place the

choke lever in Position 3 and pull the starter rope briskly 3 to 8 times. The engine should start. If not, repeat.

HOT RESTART: If the unit is already hot; place the choke lever in Position 2, making sure to NOT squeeze the throttle trigger, and follow steps 7 thru 9 above.

STOPPING INSTRUCTIONS

1.Release your hand from the trigger. Allow the engine to cool down by idling.

2.Press the On/Off Stop Control switch in the OFF (O) position and hold until the engine comes to a complete stop (Fig. 11).

On/Off

 

Trigger

 

 

Choke

Primer Bulb

Lever

Y

t

Fig. 11

I{I NH

®®G

Primer Bulb

Position 3

Position

2

Position 1

 

 

Fig. 12

Starting Position

__ncredi=PulJ /

Starter Rope

Trigger

Fig. 13

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents INCREDI.PULL For QUESTIONS, Call Other Safety Warnings While OperatingSafety and International Symbols Symbol MeaningCraftsman Full Warranty Read Operators ManualTrigger Air Filter Cover Fuel CapAssembling Unit Recommended OIL Type Adding OIL to Crankcase Initial USEStarting Instructions Stopping InstructionsOperating Tips Using the Variable Speed Cruise ControlHolding the Blower Maintenance Schedule Frequency Maintenance RequiredSee Checking the OIL LevelAIR Filter Maintenance Idle Speed Adjustment IntakeCleaning Spark Arrestor MaintenanceReplacing Spark Plug StorageAction CauseCause Action RPMOwners Warranty Responsibilities Page Manual del Operador Parac Hispas Proposicion 65 DE California Simbolo SignificadoIndice DE Contenidos \ MoieelmDurante LA Operacion AnsiOtras Advertencias DE Seguridad Nota EspecialSimbolo DE Alerta DE Seguridad LEA EL Manual DEL OperadorUSE Proteccion Ocular Y Auditiva Combustible SIN PlomoPalanca del obturador Tubo de la sopladora Boquilla o Tubo Ranura de topeBoquilla o tubo Tubo de la Cbmo Quitar el Tubo de la SopladoraTipo DE Aceite Recomendado Carga DE Combustible EN LA UnidadInstrucciones DE Arranque Instrucciones DE ParadaSostenimientode LA SOPLADORA/ASPIRADORA Consejos 0TILES Sobre LA OperacionCbmo usar el control de Crucero De velocidad Variable LentoPrograma DE Mantenimiento Frecuencia Mantenimiento Requerido ConsulteInspeccion DEL Nivel DE Aceite EIOAnulada Ajuste DEL Velocidad MinimaHuelgo DEL Brazo Oscilante El huelgo recomendado para lasValvulas de entrada y de escape es EntradaMantenimiento DEL Amortiguador DE Chispas AdvertenciaCausa E14E15 Cobertura de la Garantia del FabricanteE16 E17 Items Not Shown E18E19 MY-HOME

316.794830 specifications

The Craftsman 316.794830 is a versatile and powerful tool designed to meet the needs of both DIY enthusiasts and professional craftsmen. This tool, recognized for its efficiency and reliability, stands out as a great addition to any workshop.

One of the main features of the Craftsman 316.794830 is its robust motor. With a performance-oriented design, it provides sufficient power to tackle a range of tasks, from heavy-duty operations to more delicate projects. The tool operates at varying speeds, offering users the flexibility to adjust settings according to the requirements of their specific tasks. This feature is particularly useful for those who need precision for intricate work or the ability to apply maximum power for tougher jobs.

Another notable characteristic of the Craftsman 316.794830 is its ergonomic design. The tool features a comfortable grip that minimizes fatigue during prolonged use. The lightweight construction makes it easy to maneuver, enhancing user control and enhancing precision. This design aspect is crucial for users who often find themselves working for extended periods of time, as it allows them to maintain comfort without sacrificing performance.

In terms of safety, the Craftsman 316.794830 comes equipped with several features that prioritize the well-being of its users. The tool includes a safety lock to prevent accidental activation, reducing the risk of injuries. Furthermore, the construction of the tool complies with strict safety standards, ensuring durability while prioritizing the safety of those operating it.

The versatility of the Craftsman 316.794830 is further enhanced by its compatibility with a range of attachments and accessories. Whether for sanding, grinding, or cutting, users can easily switch between different tools to suit their specific needs. This adaptability makes it an ideal choice for those looking to invest in a multi-functional tool without needing to purchase multiple devices.

In addition, the Craftsman 316.794830 boasts a reliable warranty, offering peace of mind to users regarding its durability and functionality. This warranty reflects the brand's commitment to quality and customer satisfaction, ensuring that users feel confident in their purchase.

Overall, the Craftsman 316.794830 is an embodiment of innovation and utility, making it a valuable asset for those engaged in crafting and construction projects. Its combination of power, design, safety features, and versatility makes it an excellent choice for any workshop environment. Whether you are a seasoned professional or a hobbyist, this tool can meet your diverse crafting needs effectively.
Top Page Image Contents