AIR Filter, Clean AIR Screen, Muffler, Cleaning

4.	Refill engine with oil through oil fill dipstick
	tube. Pour slowly. Do not overfill. For
	approximate capacity see “PRODUCT
	SPECIFICATIONS”sectionofthismanual.
5.	Use gauge on oil fill cap/dipstick for
	checking level. For accurate reading,
	tighten dipstick cap securely onto the

CLEAN AIR SCREEN

Air screen must be kept free of dirt and chaff to prevent engine damage from overheating. Clean with a wire brush or compressed air to remove dirt and stubborn dried gum fibers.

CLEAN AIR INTAKE/COOLING AREAS

CONOZCA SU CORTADORA DE CÉSPED

LEA ESTE MANUAL DE OPERARIO Y LAS REGLAS DE SEGURIDAD ANTES DE OPERAR SU CORTADORA DE CÉSPED

Compare las ilustraciones con su cortadora de césped para familiarizarse con las ubicaciones de los diferentes controles y ajustes. Conserve este manual para futuras consultas.

tube before removing dipstick. Keep oil

at “FULL” line on dipstick. Tighten cap

onto the tube securely when finished.

AIR FILTER

Your engine will not run properly using a dirty air filter. Replace the air filter every 100 hours of operation or every season, whichever occurs first. Service air cleaner more often under dusty conditions.

1.Remove cover knob and cover.

2.Carefully remove cartridge.

3.Clean base carefully to prevent debris from falling into carburetor.

4.Clean by gently tapping on a flat sur- face.

5.Reinstall cartridge, cover and secure with cover knob.

Cover Knob

Cover

Air Filter

To ensure proper cooling, make sure the grass screen, cooling fins, and other exter- nal surfaces of the engine are kept clean at all times.

Every 100 hours of operation (more often under extremely dusty, dirty conditions), remove the blower housing and other cooling shrouds. Clean the cooling fins and external surfaces as necessary. Make sure the cooling shrouds are reinstalled.

NOTE: Operating the engine with a blocked grass screen, dirty or plugged cooling fins, and/or cooling shrouds removed will cause engine damage due to overheating.

MUFFLER

Inspect and replace corroded muffler and spark arrester (if equipped) as it could create

afire hazard and/or damage.

SPARK PLUG(S)

Replace spark plug(s) at the beginning of each mowing season or after every 100 hours of operation, whichever occurs first. Spark plug type and gap setting are shown in “PRODUCT SPECIFICATIONS” section of this manual.

CLEANING

Pedal del freno

Palanca del embrague de la plataforma

Émbolo de la palanca del elevador

Palanca de ajuste de altura

Control de rueda libre

Pedal del freno de estacionamiento

(ROS) en

posición “on”

Interruptor de

arranque

Palanca de control de movimiento

•Clean engine, battery, seat, finish, etc. of all foreign matter.

•Keep finished surfaces and wheels free of all gasoline, oil, etc.

•Protect painted surfaces with automotive

type wax.

We do not recommend using a garden hose

Nuestra cortadora de césped cumple con las normas de seguridad aplicables del

Instituto Nacional Estadounidense de Normas.

NOTE: If very dirty or damaged, replace cartridge.

IMPORTANT: Petroleum solvents, such as kerosene, are not to be used to clean the cartridge. They may cause deterioration of the cartridge. Do not oil cartridge. Do not use pressurized air to clean cartridge.

or pressure washer to clean your riding mower unless the engine and transmission are covered to keep water out. Water in en- gine or transmission will shorten the useful life of your riding mower. Use compressed air or a leaf blower to remove grass, leaves and trash from riding mower and mower.

PALACA DEL EMBRAGUE DE LA PLATA- FORMA - Se usa para activar la cuchilla de la cortadora de césped.

PEDAL DEL FRENO - Se usa para frenar la cortadora de césped y arrancar el motor.

PALANCA DE AJUSTE DE ALTURA - Se usa para ajustar la altura de corte de la cortadora de césped.

INTERRUPTOR DE ARRANQUE - Se usa para arrancar y detener el motor.

ÉMBOLO DE LA PALANCA DEL ELEVADOR - Se usa para soltar la palanca de ajuste de altura cuando se cambia su posición.

PALANCA DE FRENO DE ESTACIONAMIENTO

-Fija el freno de estacionamiento en la posición de freno.

PALANCA DE CONTROL DE MOVIMIENTO - Selecciona la velocidad y dirección de la cortadora de césped.

CONTROL DE RUEDA LIBRE - Desactiva la transmisión para empujar o remolcar despacio la cortadora de césped con el motor apagado.

INTERRUPTOR DEL SISTEMA DE FUNCIO- NAMIENTO HACIA ATRÁS (ROS) EN POSI- CIÓN “ON” - Permite la operación del conjunto segador o otro accesorio accionado mientras que en revés.

WE261 specifications

The Weed Eater WE261 is a robust and versatile string trimmer designed to tackle a variety of lawn care tasks with ease and efficiency. Aimed at both homeowners and landscaping professionals, the WE261 is built to handle the challenges of overgrown lawns and garden beds, providing powerful performance and reliability.

One of the standout features of the WE261 is its 26cc 2-cycle engine, which delivers ample power while maintaining a lightweight profile. This engine ensures that users can navigate through dense vegetation and thick weeds without compromising performance. The 2-cycle technology allows for efficient fuel usage, providing users with longer run times between refuels.

The WE261 is equipped with a dual line bump head, which automatically releases more line as needed. This feature enhances productivity by allowing the user to focus on trimming rather than manually adjusting the string. The .095-inch line diameter provides a thick cutting path, making it effective against stubborn weeds and tall grass.

Another significant characteristic of the WE261 is its ergonomic design. The trimmer features a padded hand grip and an adjustable handle, allowing users to customize their grip for maximum comfort and control. This is especially beneficial during extended use, as it minimizes fatigue and enhances maneuverability.

The trimmer also incorporates an easy-start technology, which simplifies the starting process. Users can enjoy quick and hassle-free starts with minimal effort required. This feature is particularly useful for those who may not have extensive experience with starting gas-powered equipment.

Durability is a key consideration in the design of the WE261. Constructed with high-quality materials, this weed eater is built to withstand the rigors of regular use. The robust build ensures that it can handle various outdoor conditions, making it a reliable option for any lawn care enthusiast.

In summary, the Weed Eater WE261 presents a combination of power, efficiency, and user-friendly features. With its strong 26cc engine, automatic dual line bump head, ergonomic design, and easy-start technology, it stands out as an exceptional choice for anyone looking to maintain a well-groomed lawn. Whether dealing with overgrown areas or simply keeping the yard tidy, the WE261 is up to the task, delivering performance that users can trust.