Sears 580.76101 owner manual Product Specifications, General Recommendations, Before Each USE

Page 10

PRODUCT SPECIFICATIONS

Pressure Washer Specifications

Pressure

1,800 PSI

Flow Rate

2.0 GPM

Chemical Mix

Use as directed

Water Supply Temperature

Not to Exceed 100°F

Engine

Specifications

 

Rated Horsepower

4.5 HP

Spark Plug Type:

 

Resistor

Champion RJ-19LM

Set Gap To:

0.030 inches(0.76mm)

Gasoline

Capacity

1.6 Quarts

Oil

SAE 30

GENERAL RECOMMENDATIONS

The pressure washers warranty does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, the operator must maintain pressure washer as instructed in this manual including proper storage as detailed in "Storage" on page 13.

Some adjustments will need to be made periodically to properly maintain your pressure washer.

All service and adjustments should be made at least once each season. Follow the requirements in the "Maintenance Schedule" chart above.

NOTE: Once a year you should clean or replace the spark plug and replace the air filter. A new spark plug and clean air filter assure proper fuel-air mixture and help your engine run better and last longer.

BEFORE EACH USE

•Check engine oil level.

•Check water inlet screen for damage.

•Check in-line filter for damage.

•Check high pressure hose for leaks.

•Check chemical filters for damage.

•Check spray gun and nozzle extension assembly for leaks.

•Purge pump of air and contaminants.

PRESSURE WASHER

MAINTENANCE

Check and Clean Inlet Screen

Examine garden hose inlet screen. Clean if it is clogged or replace if it is torn.

Check High Pressure Hose

High pressure hoses can develop leaks from wear, kinking, or abuse. Inspect hose before each use. Check for cuts, leaks, abrasions, bulging of cover, or damage or movement of couplings. If any of these conditions exist, replace hose immediately.

_ ReplaceAUTION!withNeverhose thatrepairexceedsa high thepressuremaximumhose. pressure rating of your pressure washer.

Check Spray Gun and Nozzle Extension

Examine hose connection to spray gun and make sure it is secure. Test trigger by pressing it and making sure it springs back into place when you release it. Engage safety latch and test trigger. You should not be able to press trigger. Replace spray gun immediately if it fails any of these tests.

Check In-Line Filter

Refer to the illustration and service the in-line filter if it becomes clogged, as follows:

In-line Filter

Nozzle Extension

O-ring

1.Detach spray gun and nozzle extension from high pressure hose. Detach nozzle extension from spray gun and remove o-ring and screen from nozzle

extension. Flush the screen, spray gun, and nozzle extension with clean water to clear debris.

2.If the screen is damaged, the o-ring kit contains a replacement in-line filter screen and an o-ring. If undamaged, reuse screen.

3.Place the in-line filter screen into the threaded end of the nozzle extension. Direction does not matter. Push the screen in with the eraser end of a pencil

until it rests flat at the bottom of the opening. Take care to not bend the screen.

4.Place the o-ring into the recess. Push the o-ring snugly against the in-line filter screen.

5.Assemble the nozzle extension to the spray gun, as described earlier in this manual.

Purge Pump of Air and Contaminants

To remove air from the pump, follow these steps:

•Set up the pressure washer as described in the "Assembling Your Pressure Washer" section and connect the water supply.

•Pull the trigger on the gun and hold until a steady stream of water appears.

To remove contaminants from the pump, follow these steps:

•Set up the pressure washer as described in the "Assembling Your Pressure Washer" section, and connect the water supply.

•Remove the nozzle extension from the gun.

•Start the engine according to instructions in "How To Use Your Pressure Washer" section.

•Pull the trigger on the gun and hold.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Rules and Operating Instructions HorsepowerRead this manual and follow all Safety Roebuck and CO., Hoffman Estates, IL 60179 U.S.ALimited Warranty on Companion High Pressure Washer Sears, Roebuck and Co., Dept WA, Hoffman Estates, ILDo Notsprayflammableliquids DoNotby-passanysafetydeviceonthis machineOperateandstorethisunitona stablesurface Assembling Your Pressure Carton ContentsRemove Pressure Washer From Carton WasherAdd Gasoline Checklist Before Starting EngineConnect Hose and Water Supply to Pump Know Your Pressure Washer HOW to USE Your Pressure Washer To Start Your Pressure WasherApplying Detergent with the Adjustable Nozzle How to Stop Your Pressure WasherHow To Use the Adjustable Nozzle To apply detergent, follow these stepsPressure Washer Rinsing Owners ResponsibilitiesAutomatic Cool Down System General Recommendations Product SpecificationsPressure Washer Maintenance Before Each USERing Maintenance Engine MaintenanceNozzle Maintenance Checking Oil LevelChanging Oil Service Air CleanerService Spark Plug CarburetorWinter Storage After Each USEGeneral Long Term StorageOil Cylinder Bore OtherChange Oil Protect PumpPull nozzle backward for high pressure mode ProblemNozzle in low pressure mode CauseI31 Main Unit m Parts ListCompanion 1,800 PSI Pressure Washer PaN # Qty DescriptionView Companion 1,800 PSI Pressure Washer Pump m Exploded21 o34 Companion 1,800 PSI Pressure Washer Pump Parts List 505 @ To INSTALL. see Repair 306524 c684 13 G190 ValveDescription Page What is not Covered What is CoveredMontaje Garantia EspecificacionesAlmacenamiento Reparaciondedanos OperacionHacerlo,podrianocurrirlesionespotelmovimiento ChorroRociadoantesdeponerenmarchalaunidadDeno MandoMontaje DE LA Maquina Lavadora a Presion DepositadoelcombustibleyelaceiterecomendadoRetire LA Maquina Lavadora a Presion DE LA Caja Contenido DE LA CajaLista DE Revision Previa DepositeelaceitelentamenteLimpielavarilladeExcesivamente Arranque DEL MotorConozca SU Maquina Lavadora DE Alta Presion Como Darle Arranque a su Mquina Lavadora a Presion Aplicacion del Detergente Usando la Boquilla Ajustable Como Detener su Mquina Lavadora a PresionComo Usar la Boquilla Ajustable Para aplicar el detergente, siga los siguientes pasosEnjuage de la Mquina Lavadora a Presion Responsabilidades DEL PropietarioSistema de Enfriamiento Autom&tico Alivio Tdrmico Antes DE Cada USO Especificaciones DEL ProductoRecomendaciones Generales Mantenimiento DE LA Maquina Lavadora a PresionMantenimiento de los Anillos O Elimine el Aire y los Contaminantes de la BombaMantenimiento de la Boquilla Para retirar el aire de la bomba, siga los siguientes pasosConectordelamangueradejardin NOTALosdosanillosoanteriorestienenuntamaSoMantenimiento DEL Motor Proporcione Servicio a la Bujia EncuentranelfondodelabaseDespues DE Cada USO CarburadorOtros Almacenamiento Para InviernoAlmacenamiento Prolongado Proteja el Sistema de CombustibleProblema SolucibnQUE Esta Cubierto QUE no Esta CubiertoServiceSideof Sears

580.76101 specifications

The Sears 580.76101 is a versatile and compact sewing machine designed for both novice and experienced seamstresses. One of its standout features is its ease of use, which makes it accessible for beginners while still offering the capabilities that seasoned users expect. The machine boasts a user-friendly interface that includes a clear and adjustable stitch selector dial, allowing users to switch between various stitch types effortlessly.

One of the key characteristics of the Sears 580.76101 is its lightweight yet durable construction, making it portable and ideal for taking to classes or sewing groups. The built-in carrying handle adds to its convenience, enabling users to transport the machine with ease. Despite its compact size, the machine does not compromise on functionality. It is equipped with a powerful motor that provides consistent stitching performance, even with thicker fabrics like denim and multiple layers.

The sewing machine supports a variety of stitching options, including straight, zigzag, and decorative stitches. This feature allows users to explore their creativity and implement unique designs in their projects. Additionally, the Sears 580.76101 includes adjustable stitch length and width settings, which enable customization according to individual preferences and project requirements.

Another notable technology integrated into the Sears 580.76101 is its automatic bobbin winding system. This innovative design simplifies the task of preparing the machine for sewing, ensuring that the bobbin is filled efficiently and smoothly. The machine also features an easy-to-thread system that minimizes frustration, with color-coded pathways guiding users through the threading process.

The sturdy presser foot allows for reliable fabric handling and can be easily changed to accommodate various sewing tasks, such as quilting or buttonholing. The adjustable presser foot pressure feature is particularly beneficial, as it ensures that the fabric is fed smoothly regardless of its thickness.

In conclusion, the Sears 580.76101 is a well-rounded sewing machine that embodies a perfect balance of user-friendly features, essential technologies, and robust characteristics. Whether you are a beginner looking to start your sewing journey or a more experienced sewer seeking a reliable machine for everyday use, the Sears 580.76101 is designed to meet a variety of sewing needs with ease and efficiency.
Top Page Image Contents