Sears 580.76101 owner manual What is not Covered, What is Covered

Page 24

Your Warranty Rights and Obligations

The California Air Resources Board ("CARB") and Sears Roebuck and Co., USA, are pleased to explain the Emission Control System Warranty on your model year 2000 and later small off-road engine (engine). In California, new engines must be designed, built and equipped to meet the State's stringent anti-smog standards. Sears must warrant the emission control system on your engine for the periods of time listed below provided there has been no abuse, neglect, or improper maintenance of your engine.

Your emission control system includes parts such as the carburetor and the ignition system.

Where a warrantable condition exists, Sears will repair your engine at no cost to you. Expenses covered under under

warranty include diagnosis, parts, and labor.

Manufacturer's Warranty Coverage

The model year 2000 and later engines are warranted for two years. If any emission related part on your engine (as listed below) is defective, the part will be repaired or replaced by Sears.

Owner's Warranty Responsibilities

As the engine owner, you are responsible for the performance of the required maintenance listed in this owners manual. Sears recommends that you retain all receipts covering maintenance on your engine, but Sears cannot deny warranty solely due for the lack of receipts or for your failure to ensure the performance of all scheduled maintenance.

As the engine owner, you should be aware that Sears may deny you warranty coverage if your engine or a part of it has failed due to abuse, neglect, improper maintenance, unapproved modifications, or the use of parts not made or approved by the original equipment manufacturer.

You are responsible for presenting your engine to a Sears

authorized repair center as soon as a problem exists. Warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days.

If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized service center or call Sears at 1-800-473-7247.

If you have any questions regarding your warranty rights and responsibilities, your should contact your nearest authorized service center or call Sears at 1-800-473-7247.

Warranty Period

Any warranted part which is not scheduled for replacement as required maintenance, or which is scheduled only for regular inspection to the effect of "repair or replace as necessary" shall be warranted for 2 years. Any warranted part which is scheduled for replacement as required maintenance shall be warranted for the period of time up to the first scheduled replacement point for that part.

Diagnosis

The owner shall not be charged for diagnostic labor which leads to the determination that the warranted part is

defective if the diagnostic work is performed at an approved Sears service center.

Consequential Damages

Sears may be liable for damages to other engine components caused by the failure of a warranted part still under warranty.

WHAT IS NOT COVERED

All failures caused by abuse, neglect, or improper maintenance are not covered.

Add-on or Modified Parts

The use of add-on or modified parts can be grounds for disallowing a warranty claim. Sears is not liable to cover failures of warranted parts caused by the use of add-on or modified parts.

How to File a Claim

If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized service center or call Sears at 1-800-473-7247.

Where to Get Warranty Service

Warranty services or repairs shall be provided at all Sears authorized service centers.

Warranty Commencement Date

The warranty period begins on the date the engine is delivered.

Length of Coverage

Sears warrants to the initial owner and each subsequent purchaser that the engine is free from defects in materials and workmanship which cause the failure of a warranted part for a period of two years.

WHAT IS COVERED

Repair or Replacement of Parts

•Repair or replacement of any warranted part will be

performed at no charge to the owner at an approved Sears service center.

Maintenance, Replacement and Repair of Emission Related Parts

Any Sears approved replacement part used in the performance of any warranty maintenance or repair on emission related parts will be provided without charge to the owner if the part it under warranty.

Emission Control Warranty Parts List

1.Carburetor Assembly

2.Ignition System

a.Spark Plug, covered up to maintenance schedule.

b.Ignition Module

3.Crankcase Breather Tube

4.Exhaust Manifold

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Horsepower Read this manual and follow all SafetyRules and Operating Instructions Roebuck and CO., Hoffman Estates, IL 60179 U.S.ALimited Warranty on Companion High Pressure Washer Sears, Roebuck and Co., Dept WA, Hoffman Estates, ILDoNotby-passanysafetydeviceonthis machine Do NotsprayflammableliquidsOperateandstorethisunitona stablesurface Carton Contents Remove Pressure Washer From CartonAssembling Your Pressure WasherChecklist Before Starting Engine Add GasolineConnect Hose and Water Supply to Pump Know Your Pressure Washer HOW to USE Your Pressure Washer To Start Your Pressure WasherHow to Stop Your Pressure Washer How To Use the Adjustable NozzleApplying Detergent with the Adjustable Nozzle To apply detergent, follow these stepsOwners Responsibilities Pressure Washer RinsingAutomatic Cool Down System Product Specifications Pressure Washer MaintenanceGeneral Recommendations Before Each USEEngine Maintenance Nozzle MaintenanceRing Maintenance Checking Oil LevelService Air Cleaner Service Spark PlugChanging Oil CarburetorAfter Each USE GeneralWinter Storage Long Term StorageOther Change OilOil Cylinder Bore Protect PumpProblem Nozzle in low pressure modePull nozzle backward for high pressure mode CauseI31 Unit m Parts List Companion 1,800 PSI Pressure WasherMain PaN # Qty DescriptionCompanion 1,800 PSI Pressure Washer Pump m Exploded View21 o34 Companion 1,800 PSI Pressure Washer Pump Parts List To INSTALL. see Repair 306524 c 684505 @ 13 G190 ValveDescription Page What is not Covered What is CoveredGarantia Especificaciones AlmacenamientoMontaje Reparaciondedanos OperacionChorro RociadoantesdeponerenmarchalaunidadDenoHacerlo,podrianocurrirlesionespotelmovimiento MandoDepositadoelcombustibleyelaceiterecomendado Retire LA Maquina Lavadora a Presion DE LA CajaMontaje DE LA Maquina Lavadora a Presion Contenido DE LA CajaDepositeelaceitelentamenteLimpielavarillade ExcesivamenteLista DE Revision Previa Arranque DEL MotorConozca SU Maquina Lavadora DE Alta Presion Como Darle Arranque a su Mquina Lavadora a Presion Como Detener su Mquina Lavadora a Presion Como Usar la Boquilla AjustableAplicacion del Detergente Usando la Boquilla Ajustable Para aplicar el detergente, siga los siguientes pasosResponsabilidades DEL Propietario Enjuage de la Mquina Lavadora a PresionSistema de Enfriamiento Autom&tico Alivio Tdrmico Especificaciones DEL Producto Recomendaciones GeneralesAntes DE Cada USO Mantenimiento DE LA Maquina Lavadora a PresionElimine el Aire y los Contaminantes de la Bomba Mantenimiento de la BoquillaMantenimiento de los Anillos O Para retirar el aire de la bomba, siga los siguientes pasosNOTALosdosanillosoanteriorestienenuntamaSo ConectordelamangueradejardinMantenimiento DEL Motor Encuentranelfondodelabase Despues DE Cada USOProporcione Servicio a la Bujia CarburadorAlmacenamiento Para Invierno Almacenamiento ProlongadoOtros Proteja el Sistema de CombustibleProblema SolucibnQUE Esta Cubierto QUE no Esta CubiertoServiceSideof Sears

580.76101 specifications

The Sears 580.76101 is a versatile and compact sewing machine designed for both novice and experienced seamstresses. One of its standout features is its ease of use, which makes it accessible for beginners while still offering the capabilities that seasoned users expect. The machine boasts a user-friendly interface that includes a clear and adjustable stitch selector dial, allowing users to switch between various stitch types effortlessly.

One of the key characteristics of the Sears 580.76101 is its lightweight yet durable construction, making it portable and ideal for taking to classes or sewing groups. The built-in carrying handle adds to its convenience, enabling users to transport the machine with ease. Despite its compact size, the machine does not compromise on functionality. It is equipped with a powerful motor that provides consistent stitching performance, even with thicker fabrics like denim and multiple layers.

The sewing machine supports a variety of stitching options, including straight, zigzag, and decorative stitches. This feature allows users to explore their creativity and implement unique designs in their projects. Additionally, the Sears 580.76101 includes adjustable stitch length and width settings, which enable customization according to individual preferences and project requirements.

Another notable technology integrated into the Sears 580.76101 is its automatic bobbin winding system. This innovative design simplifies the task of preparing the machine for sewing, ensuring that the bobbin is filled efficiently and smoothly. The machine also features an easy-to-thread system that minimizes frustration, with color-coded pathways guiding users through the threading process.

The sturdy presser foot allows for reliable fabric handling and can be easily changed to accommodate various sewing tasks, such as quilting or buttonholing. The adjustable presser foot pressure feature is particularly beneficial, as it ensures that the fabric is fed smoothly regardless of its thickness.

In conclusion, the Sears 580.76101 is a well-rounded sewing machine that embodies a perfect balance of user-friendly features, essential technologies, and robust characteristics. Whether you are a beginner looking to start your sewing journey or a more experienced sewer seeking a reliable machine for everyday use, the Sears 580.76101 is designed to meet a variety of sewing needs with ease and efficiency.
Top Page Image Contents