After Each USE, General, Winter Storage

AFTER EACH USE

Water should not remain in the unit for long periods of time. Sediments or minerals can deposit on pump parts and "freeze" pump action. Follow these procedures after every use:

•Flush detergent siphoning tube by placing the filter into a pail of clean water while running pressure washer in low pressure mode (adjustable nozzle in the forward position). Flush for one to two minutes.

•Shut off the engine and let it cool, then remove all hoses.

•Disconnect spark plug wire from spark plug.

•Empty the pump of all liquids by pulling recoil handle about 6 times. This should remove most of

the liquid in the pump.

•If storing for more than 30 days see "Long Term Storage".

GENERAL

•Inspect the high pressure hose for damage. Cuts in the hose or fraying could result in leaks and loss of pressure. Should any damage be found, replace the hose. Do Not attempt to repair a damaged hose. Replace the hose with the genuine Sears part.

•Drain water from hose, gun, and nozzle extension and properly coil it on the attached wireform.

•Reconnect spark plug wire to spark plug.

•Store unit in a clean, dry area.

_	ARNING! Never	the engine with fuel in
	the gas tank indoors storein enclosed, poorly

ventilated areas where fumes may reach an open flame, a spark, or pilot light.

WINTER STORAGE

CAUTION! You must protect your unit from freezing temperatures. Failure to do so will permanently damage your pump and render your unit inoperable. Freeze damage is not covered under warranty.

To protect the unit from freezing temperatures:

•Empty the pump of all pumped liquids by pulling recoil handle about 6 times. This should remove

most of the liquid in the pump.

•Use pump saver, available at Sears retail item number 74403, to treat pump. This prevents freeze damage and lubricates pistons and seals.

•If pump saver is not available, connect a 3-foot section of garden hose to the water inlet adapter.

Pour RV-antifreeze (antifreeze without alcohol) into the hose. Pull the recoil handle twice. Disconnect 3-foot hose.

LONG TERM STORAGE

If you do not plan to use the pressure washer for more than 30 days, you must prepare the engine and pump for long term storage.

It is important to prevent gum deposits from forming in essential fuel system parts such as the carburetor, fuel filter, fuel hose or tank during storage. Also, experience indicates that alcohol-blended fuels (called gasohol, ethanol or methanol) can attract moisture, which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage.

Protect Fuel System

Draining Fuel Tank:

_	ARNING! Drain fuel, using funnel, into
	approved container outdoors, away from open
	flame. Be sure engine is cool. Do Not smoke.

•Remove all gasoline from carburetor and fuel tank to prevent gum deposits from forming on these parts and causing possible malfunction of engine.

•Run engine until fuel tank is empty and engine stops due to lack of fuel.

580.76101 specifications

The Sears 580.76101 is a versatile and compact sewing machine designed for both novice and experienced seamstresses. One of its standout features is its ease of use, which makes it accessible for beginners while still offering the capabilities that seasoned users expect. The machine boasts a user-friendly interface that includes a clear and adjustable stitch selector dial, allowing users to switch between various stitch types effortlessly.

One of the key characteristics of the Sears 580.76101 is its lightweight yet durable construction, making it portable and ideal for taking to classes or sewing groups. The built-in carrying handle adds to its convenience, enabling users to transport the machine with ease. Despite its compact size, the machine does not compromise on functionality. It is equipped with a powerful motor that provides consistent stitching performance, even with thicker fabrics like denim and multiple layers.

The sewing machine supports a variety of stitching options, including straight, zigzag, and decorative stitches. This feature allows users to explore their creativity and implement unique designs in their projects. Additionally, the Sears 580.76101 includes adjustable stitch length and width settings, which enable customization according to individual preferences and project requirements.

Another notable technology integrated into the Sears 580.76101 is its automatic bobbin winding system. This innovative design simplifies the task of preparing the machine for sewing, ensuring that the bobbin is filled efficiently and smoothly. The machine also features an easy-to-thread system that minimizes frustration, with color-coded pathways guiding users through the threading process.

The sturdy presser foot allows for reliable fabric handling and can be easily changed to accommodate various sewing tasks, such as quilting or buttonholing. The adjustable presser foot pressure feature is particularly beneficial, as it ensures that the fabric is fed smoothly regardless of its thickness.

In conclusion, the Sears 580.76101 is a well-rounded sewing machine that embodies a perfect balance of user-friendly features, essential technologies, and robust characteristics. Whether you are a beginner looking to start your sewing journey or a more experienced sewer seeking a reliable machine for everyday use, the Sears 580.76101 is designed to meet a variety of sewing needs with ease and efficiency.