How to Stop Your Pressure Washer

•Move throttle control lever to "Stop" position.

•Squeeze trigger on the spray gun to relieve pressure in the hose.

NOTE: A small amount of water will squirt out when you release the pressure.

How To Use the Adjustable Nozzle

You now should know how to START your pressure washer and how to STOP it. The information in this

section will tell you how to adjust the spray pattern and apply detergent or other cleaning chemicals.

_ CAUTION! Never adjust spray pattern when spraying. Never put hands in front of nozzle to

adjust spray pattern.

Your spray gun is equipped with an adjustable nozzle that permits you to change the spray pressure and the spray pattern, as follows:

•Pushing the nozzle forward changes the spray pressure from high to low pressure. Pulling the nozzle back changes the pressure from low to high.

Slide nozzle backward for Slide nozzle forward for

high pressure mode. low pressure mode and detergent application.

Rotating the nozzle adjusts the spray pattern from a narrow pattern to a fan pattern.

Twist nozzle counter-	Twist nozzle	clockwise for
clockwise for fan pattern.	narrow spray	pattern.

•Point the nozzle toward the ground, disengage the safety latch, and press the trigger to test the pattern.

•For most effective cleaning, keep the spray nozzle

between 8 to 24 inches away from cleaning surface.

•If you get the spray nozzle too close, especially using high pressure mode, you may damage the surface being cleaned.

•Do Not get closer than 8 inches when cleaning tires.

Applying Detergent with the Adjustable Nozzle

IMPORTANT: Use chemicals designed specifically for pressure washers. Household detergents could damage the pump.

IMPORTANT: You must attach all hoses before you

start the engine. Starting the engine without all the hoses connected and without the water turned ON will

damage the pump.

To apply detergent, follow these steps:

•Review the use of the adjustable nozzle.

•Prepare detergent solution as required by the job.

•Hang the detergent solution container on the hook attached to the handle.

•Place the filter end of the detergent siphoning tube into the detergent container.

CAUTION! When inserting the filter into the detergent container, route the tube so as to keep it from inadvertently contacting the hot muffler.

•Make sure the garden hose is connected to the water inlet. Check that the high pressure hose is connected to the spray gun and the pump. Start the engine.

•Attach the nozzle extension to the spray gun. Slide the adjustable nozzle forward to low pressure mode. Detergent cannot be applied with the nozzle in high pressure position.

•Apply detergent to a dry surface, starting from the bottom and working up.

•Allow the detergent to "soak in" for 3-5 minutes before rinsing. Reapply as needed to prevent

surface from drying.

•Start at lower portion of area to be washed and work upward, using even overlapping strokes.

IMPORTANT: You must flush the chemical injection system after each use by placing the filter into a clean bucket of water and running the pressure washer in low pressure for 1-2 minutes.

580.76101 specifications

The Sears 580.76101 is a versatile and compact sewing machine designed for both novice and experienced seamstresses. One of its standout features is its ease of use, which makes it accessible for beginners while still offering the capabilities that seasoned users expect. The machine boasts a user-friendly interface that includes a clear and adjustable stitch selector dial, allowing users to switch between various stitch types effortlessly.

One of the key characteristics of the Sears 580.76101 is its lightweight yet durable construction, making it portable and ideal for taking to classes or sewing groups. The built-in carrying handle adds to its convenience, enabling users to transport the machine with ease. Despite its compact size, the machine does not compromise on functionality. It is equipped with a powerful motor that provides consistent stitching performance, even with thicker fabrics like denim and multiple layers.

The sewing machine supports a variety of stitching options, including straight, zigzag, and decorative stitches. This feature allows users to explore their creativity and implement unique designs in their projects. Additionally, the Sears 580.76101 includes adjustable stitch length and width settings, which enable customization according to individual preferences and project requirements.

Another notable technology integrated into the Sears 580.76101 is its automatic bobbin winding system. This innovative design simplifies the task of preparing the machine for sewing, ensuring that the bobbin is filled efficiently and smoothly. The machine also features an easy-to-thread system that minimizes frustration, with color-coded pathways guiding users through the threading process.

The sturdy presser foot allows for reliable fabric handling and can be easily changed to accommodate various sewing tasks, such as quilting or buttonholing. The adjustable presser foot pressure feature is particularly beneficial, as it ensures that the fabric is fed smoothly regardless of its thickness.

In conclusion, the Sears 580.76101 is a well-rounded sewing machine that embodies a perfect balance of user-friendly features, essential technologies, and robust characteristics. Whether you are a beginner looking to start your sewing journey or a more experienced sewer seeking a reliable machine for everyday use, the Sears 580.76101 is designed to meet a variety of sewing needs with ease and efficiency.