Tiger FLX15, FLX10 manual Safety

Page 17
(SG-18)
(S3PT-17)
(S3PT-15)
(SBM-6)

SAFETY

WARNING! Relieve hydraulic pressure prior to doing any maintenance or repair work on the Implement. Place the Mower Head on the ground or securely supported on blocks or stands, disengage the PTO, and turn off the engine. Push and pull the control Levers or Joystick several times to relieve pressure prior to starting any maintenance or repair work.

SAFETY

DANGER!

WARNING!

Always shut the Tractor completely down, place the transmission in park, and set the parking brake before you or anyone else attempts to connect or disconnect the Implement and Tractor hitches.

When attaching the Implement input driveline to the Tractor PTO, it is important that the connecting yoke spring activated locking collar slides freely and the locking balls are seated securely in the groove on the Tractor PTO shaft. A driveline not attached correctly to the Tractor PTO shaft could come loose and result in personal injury and damage to the Implement.

WARNING!

Only tow the Implement behind a properly sized and equipped Tractor

 

which exceeds the weight of the Implement by at least 20%. DO

 

NOT tow the Implement behind a truck or other type of vehicle. Never

 

tow the Implement and another Implement connected in tandem.

 

Never tow the Implement at speeds over 20 MPH. (STI-6)

PARTS INFORMATION

Tiger mowers use balanced and matched system components for blade carriers, blades, cuttershafts, knives, knife hangers, rollers, drivetrain components, and bearings. These parts are made and tested to Tiger specifications. Non-genuine "will fit" parts do not consistently meet these specifications. The use of “will fit” parts may reduce mower performance, void mower warranties, and present a safety hazard. Use genuine Tiger mower parts for economy and safety.

(SPTM-1)

SEE YOUR TIGER DEALER

In addition to the design and configuration of this Implement, including Safety Signs and Safety Equipment, hazard control and accident prevention are dependent upon the awareness, concern, prudence, and proper training of personnel involved in the operation, transport, maintenance, and storage of the machine. Refer also to Safety Messages and operation instruction in each of the appropriate sections of the Tractor and Equipment Manuals. Pay close attention to the Safety Signs affixed to the Tractor and Equipment.

FLX15/10 04/06

Safety Section 1-13

© 2006Alamo Group Inc.

Page 16 Page 18
Image 17
Page 16 Page 18
Contents FLX15/FLX10 To the OWNER/OPERATOR/DEALER DEALER’S Predelivery Service Guide Table of Contents Safety Section Safety 2006Alamo Group Inc SG-11 Following rules Keep Away from Rotating Elements to prevent entanglement Safety Safety Safety Stop Mowing if Passersby are Within 100 Yards Unless Safety Safety Safety Canister Manual Inside QTY Description Safety Safety Safety Item 16 Patent Numbers Safety Item 23 Multi-Hazard Decal Safety FLX15/10 04/06 Safety Section Safety Safety Federal Laws and Regulations Page Introduction Section Introduction Before Operating this Machine Page Assembly Section From Shipping Position FLX15/10 AssemblyConnection to Tractor AdjustmentsSetting the Castor Wheels Driveline Attachment Connection to Cutter Connecting Strut To Cutter Assembly Assembly Assembly General PRE Customer Delivery ChecklistOperation Section Operation Peligro Mower Standard Equipment And Specifications Operation Personal Protective Equipment PPE Operator RequirementsTractor Requirements Tractor Safety DevicesTractor Requirements and Capabilities Rops and Seat BeltFront End Weight Tractor HorsepowerDrawbar Tractor HydraulicsTire Spacing Power Take Off PTODismounting the Tractor Getting on and OFF the TractorBoarding the Tractor Starting the Tractor Connecting the FLEX-ARM to the TractorConnecting the FLEX-ARM Tongue to the Tractor Connecting the Cutter Precision Hitch to the FLEX-ARM Connecting Mower Hydraulic Lines to the Tractor Setting the Mower Driveline Attachment Setting Deck PitchConstant Velocity CV Driveline CV Driveline Maximum Angle Check ProcedureLighting Kit Relocated PRE-OPERATION Inspection and ServiceMower Pre-Operation Inspection/Service Tractor Pre-Operation Inspection/ServiceOperation Operation Damaged Pan Cutting Component InspectionDriving the Tractor and Mower Operating the Mower Wings Brake and Differential Lock SettingStarting the Tractor Center Section Transport Lock Pin Driving the Tractor, Flex Arm, and Mower Crossing Ditches and Steep Inclines Foreign Debris Hazards Operating the TRACTOR,FLEX ARM, and MowerStop Mowing if Passersby are Within 100 Yards Unless Bystander/Passersby PrecautionsPTO RPM and Ground Speed Engaging the Power Take Off PTOOperating the Flex Arm & Mower Mowing . S G M Correct Mower Deck Positioning Wrong Mower Deck Positioning Shutting Down the Mower Disconnecting FLEX-ARM & Mower from the TractorFLEX-ARM & Mower Storage Transporting the TRACTOR, FLEX-ARM, and Mower Tires and Wheels Transporting on Public Roadways Operation Uneven surfaces. STI-1 By the following rules Hauling the Tractor, Flex Arm and MowerOperation Trouble Shooting Guide Cutter Symptom Problem Correction Trouble Shooting Guide FLX15/10Maintenance Section Maintenance MaintenanceWheel Hub Greasing and Installation Tighten Instructions for 618 Hubs Lubrication Gearboxes Universal Joint Assemblies Lubrication Chart Ramlok Disassembly Procedure Maintenance Warranty Information ONE Last Word FLX15/10 04/06 A101-010C
Top Page Image Contents