Tiger FLX15, FLX10 manual Assembly

ASSEMBLY

• On the rotary cutter wing lift cylinder, remove the
breather plug from the clevis end and replace it
with the supplied hose assembly. The replacement
hose should have double-wrapped blue ties on the
end. Route the hose through the hose organizers
to the front of the cutter.
• Connect the rotary cutter hoses to the breakaway
stand on the flex arm. The hoses are wrapped with
color coding and/or ties for ease of assembly.
• The phasing circuit connects to the yellow marked
hoses across the top of the breakaway stand.
• The wing connects to the hoses marked with the
blue ties. The single wrapped hose goes to the rod
end of the wing lift cylinder, and the hose with the
double blue tie goes to the clevis end of the
cylinder. Attach the blue coded hoses to the
second row of connections on the breakaway	To Tractor
stand with the single wrap blue on the right side.
	(Yellow/Blue)
The bottom row of the breakaway stand will not be
used.

•Route the hoses along the frame to the front of the flex arm and loop back to connect to the selector valve.

•Connect the blue coded hoses to the right side of

the selector valve, and the yellow coded hoses to	Wing Hoses (Blue)
the left side of the selector valve.	Phasing Hoses
	(Yellow)

•The two hoses from the top of the selector valve connect to the tractor. These hoses are coded with one yellow and one blue tie.

•A switch box installed in the cab of the tractor toggles the valve to operate the wing or phasing circuit.

FLX15/10 04/06 Introduction Section 3-9

© 2006 Alamo Group Inc.

ASSEMBLY