Tiger FLX10, FLX15 manual Transporting the TRACTOR, FLEX-ARM, and Mower

Page 80
(SG-25)

OPERATION

OPERATION

Properly preparing and storing the flex arm & mower at the end of the season is critical to maintaining its appearance and to help ensure years of dependable service. The following are suggested storage procedures:

1.Thoroughly clean all debris off the flex arm & mower to prevent damage from rotting grass and standing water.

2.Lubricate all flex arm & mower grease points and fill gearbox oil levels as detailed in the maintenance section.

3.Tighten all bolts and pins to the recommended torque.

4.Check the flex arm & mower for worn and damaged parts. Perform repairs and make replacements immediately so that the flex arm & mower will be ready for use at the start of the next season.

5.Store the flex arm & mower in a clean, dry place with the flex arm frame & mower housing resting securely on blocks or at ground level.

6.Keep the drivelines yokes from sitting in water, dirt and other contaminants.

7.Use spray touch-up enamel where necessary to prevent rust and maintain the appearance of the flex arm & mower.

DANGER!

Never allow children to play on or around the Tractor and Implement. Children can slip or fall off the Equipment and be injured or killed. Children can cause the Implement to shift or fall crushing themselves and others.

It is critical that driveline clutches slip when an obstacle or heavy load is encountered to avoid flex arm ,mower, and tractor damage. If the flex arm & mower sit outside for an extended period of time or are exposed to rain and/or humid air, the clutch lining plates must be inspected to ensure they are not frozen together from rust or corrosion. If the flex arm & mower have been exposed to such conditions, at the start of each mowing season, and any time it is suspected that the slip clutch plates may be frozen together, readjust the slip clutch as explained in the maintenance section of the rotary cutter manual.

13. TRANSPORTING THE TRACTOR, FLEX-ARM, AND MOWER

Inherent dangers of operating the tractor,flex arm, and mower and the possibility of accidents are not left behind when you finish mowing an area. Therefore, the operator must employ good judgement and safe operation practices when transporting the tractor, flex arm, and mower between locations. By using good judgement and following safe transport procedures, the possibility of accidents while moving between locations can be substantially minimized.

DANGER!

Never allow children or other persons to ride on the Tractor or

Implement. Falling off can result in serious injury or death.

(SG-10)

FLX15/10 04/06

Operation Section 4-36

 

 

© 2006 Alamo Group Inc.

 

Image 80
Contents FLX15/FLX10 To the OWNER/OPERATOR/DEALER DEALER’S Predelivery Service Guide Table of Contents Safety Section Safety 2006Alamo Group Inc SG-11 Following rules Keep Away from Rotating Elements to prevent entanglement Safety Safety Safety Stop Mowing if Passersby are Within 100 Yards Unless Safety Safety Safety Canister Manual Inside QTY Description Safety Safety Safety Item 16 Patent Numbers Safety Item 23 Multi-Hazard Decal Safety FLX15/10 04/06 Safety Section Safety Safety Federal Laws and Regulations Page Introduction Section Introduction Before Operating this Machine Page Assembly Section Assembly From Shipping Position FLX15/10Connection to Tractor AdjustmentsSetting the Castor Wheels Driveline Attachment Connection to Cutter Connecting Strut To Cutter Assembly Assembly Assembly PRE Customer Delivery Checklist GeneralOperation Section Operation Peligro Mower Standard Equipment And Specifications Operation Operator Requirements Personal Protective Equipment PPETractor Safety Devices Tractor RequirementsTractor Requirements and Capabilities Rops and Seat BeltTractor Horsepower Front End WeightDrawbar Tractor HydraulicsPower Take Off PTO Tire SpacingDismounting the Tractor Getting on and OFF the TractorBoarding the Tractor Connecting the FLEX-ARM to the Tractor Starting the TractorConnecting the FLEX-ARM Tongue to the Tractor Connecting the Cutter Precision Hitch to the FLEX-ARM Connecting Mower Hydraulic Lines to the Tractor Setting the Mower Setting Deck Pitch Driveline AttachmentCV Driveline Maximum Angle Check Procedure Constant Velocity CV DrivelinePRE-OPERATION Inspection and Service Lighting Kit RelocatedTractor Pre-Operation Inspection/Service Mower Pre-Operation Inspection/ServiceOperation Operation Cutting Component Inspection Damaged PanDriving the Tractor and Mower Operating the Mower Wings Brake and Differential Lock SettingStarting the Tractor Center Section Transport Lock Pin Driving the Tractor, Flex Arm, and Mower Crossing Ditches and Steep Inclines Operating the TRACTOR,FLEX ARM, and Mower Foreign Debris HazardsBystander/Passersby Precautions Stop Mowing if Passersby are Within 100 Yards UnlessEngaging the Power Take Off PTO PTO RPM and Ground SpeedOperating the Flex Arm & Mower Mowing . S G M Correct Mower Deck Positioning Wrong Mower Deck Positioning Disconnecting FLEX-ARM & Mower from the Tractor Shutting Down the MowerFLEX-ARM & Mower Storage Transporting the TRACTOR, FLEX-ARM, and Mower Tires and Wheels Transporting on Public Roadways Operation Uneven surfaces. STI-1 Hauling the Tractor, Flex Arm and Mower By the following rulesOperation Trouble Shooting Guide Cutter Trouble Shooting Guide FLX15/10 Symptom Problem CorrectionMaintenance Section Maintenance MaintenanceWheel Hub Greasing and Installation Tighten Instructions for 618 Hubs Lubrication Gearboxes Universal Joint Assemblies Lubrication Chart Ramlok Disassembly Procedure Maintenance Warranty Information ONE Last Word FLX15/10 04/06 A101-010C