ASSEMBLY
DANGER! Always shut the Tractor completely down, place the transmission in park, and set the parking brake before you or anyone else attempts to connect or disconnect the Implement and Tractor hitches.
Remove the cutter jack and place in its storage position.
ASSEMBLY
7. Connecting Strut To Cutter
Pin the strut assembly to the mounting lugs on the arm and cutter with the 1" bolts. The length of the strut from pinpoint to pinpoint should be set to according to what type of cutter is being attached. See chart for length of strut according to cutter being used.
NOTE: All cutters will have a strut mount lug welded to the cutter at the factory. If cutter is an older model and does not come with the welded mounted lug, a
Machine | Strut length |
XH1500 | |
XH1000 | |
S150 | 49" |
S100 | 48" |
1" Bolts
WARNING! NEVER STAND BETWEEN THE TRACTOR AND THE ROTARY CUTTER WHILE THE TRACTOR IS BEING BACKED TO THE HITCH
8.Connecting the Hoses to Breakaway Stand and Connecting the Selector Valve for 15’ Models
Connect the cutter hoses to the hydraulic breakaway |
|
stand. The hoses are color coded to identify their |
|
location. Never leave a disconnected hose end open |
|
always keep them capped and clean from contamination. |
|
Connect the driveline that was supplied with the Flex |
|
Arm and lower the PTO support. |
|
IMPORTANT: Before operation remove the 3/4" bolts |
|
to unlock the castor wheels. To allow them to move |
|
freely. | Breakaway |
| |
| Stand |
The selector valve kit reduces the required tractor ports and provides independent double acting wing lift action.
DANGER! | Use wing lock up pins to secure wings or lower rotary cutter to the ground before |
| attempting to connect the selector valve |
FLX15/10 04/06 | Assembly Section |
© 2006 Alamo Group Inc.