Assembly Instructions, Setup Instructions

Assembly Instructions

SETUP INSTRUCTIONS

Walker Mowers are shipped partially assembled to our distribution network, and are typically assem- bled by the selling dealer. For any additional as- sembly besides the following, contact your Walker dealer.

Tire Installation (Tractor)

•Install the drive tires using the eight (8) lug bolts that are supplied with the owner’s packet of materials. Bolts are torqued to 75 to 85 lb·ft (102 to 115 N·m).

•Check and adjust the inflation of the tires. The tire inflation recommendations are:

Drive	=	15 PSI (103 kPa)
Tailwheel	=	20 PSI (137 kPa)
Battery Service

Raise front mower body up for battery access (refer to Front Body Latch Release in Operating Instruc tions). Check the battery for electrolyte level and charge. The electrolyte level should be at the bot- tom of the vent wells [1/4 to 1/2 in. (6 to 13 mm) above plates]. If the specific gravity is less than 1.225, the battery needs charging. If the battery has been shipped dry, or is wet but needs service, refer to the following instructions.

IMPORTANT: Make sure battery is securely mount- ed in the frame. A loose battery may cause damage to the case resulting in acid leakage and severe dam- age to the machine. A hazard may be created by damage to critical working parts and safety systems.

Wet Battery Service

If the battery has been shipped wet, but the electro- lyte level is low or the battery needs to be charged then:

1.Fill each battery cell with distilled water to the bottom of the vent wells.

2.Charge battery. Refer to Battery Charging in this section.

Dry Battery Service

DANGER

Activating a battery can be dangerous. The battery should be taken to a reliable service station, battery store, or power equipment dealer where a trained techni- cian can activate the battery safely. DO NOT attempt to activate the battery unless you are experienced in battery service work. The following activation and charg- ing instructions are provided for use by a trained battery technician.

DANGER

Battery electrolyte is a poisonous and cor- rosive sulfuric acid solution.

•Avoid spillage and contact with skin, eyes, and clothing - causes severe burns.

•To prevent accidents, wear safety gog- gles and rubber gloves when working with electrolyte.

•Neutralize acid spills with baking soda and water solution.

To fill (activate) battery with electrolyte (if battery has been shipped dry):

1.Remove the battery protector plate, disconnect the battery cables and lift the battery out of the tray.

IMPORTANT: Battery must be removed from the mower before filling with electrolyte.

IMPORTANT: Obtain and use only battery grade sulfuric acid electrolyte with a 1.265 spe- cific gravity to activate the battery. DO NOT use water or any other liquid during initial activation.

2.Remove the filler caps and carefully fill each cell until the electrolyte is just above the plates.

3.After the battery is filled with electrolyte, replace the filler caps and charge the battery. Refer to

Battery Charging.

S14 specifications

The Walker S14 is an innovative piece of technology designed to enhance mobility and independence for individuals facing mobility challenges. This advanced mobility device integrates cutting-edge features and technologies to deliver a safe and comfortable user experience.

One of the standout characteristics of the Walker S14 is its lightweight yet robust design. Constructed from high-quality materials, the walker provides durability without sacrificing portability. It can easily be maneuvered both indoors and outdoors, making it suitable for various environments.

A significant technological advancement in the Walker S14 is its adjustable height feature. Users can customize the walker to their preferred height, ensuring optimal support and reducing strain on the body. This feature is particularly beneficial for individuals with varying mobility needs, as it promotes a proper walking posture.

Safety is a top priority in the design of the Walker S14. It is equipped with a reliable braking system that enhances stability when stationary. The walker features ergonomic hand grips that provide comfort and reduce the risk of slipping. Additionally, its non-slip wheels are designed to provide a reliable grip on various surfaces, contributing to a safer walking experience.

In terms of storage and convenience, the Walker S14 includes a built-in storage pouch, allowing users to carry personal items or essential belongings. This feature is particularly useful for users who wish to maintain their independence while being able to access their belongings easily.

The Walker S14 is also praised for its sleek and modern aesthetic. With a variety of color options, users can choose a design that reflects their personality while still benefiting from the practicality of the mobility device.

Moreover, the Walker S14 is designed for easy folding and portability. Whether for storage or transport, users can quickly collapse the walker to fit it in tight spaces or vehicles without any hassle.

Overall, the Walker S14 combines innovative technology, user-centric design, and robust safety features to provide an unparalleled walking experience. It empowers individuals with mobility challenges to navigate their surroundings with confidence, fostering independence and a better quality of life.