Full Forward Speed Adjustment | Walker S14 manual

Maintenance Instructions

ADJUSTMENTS

Step 4 - Full Forward Speed Adjustment

1.Move the FSC to the full FORWARD speed position.

2.Raise the body. The maximum speed tracking adjustment set screw in both transmission con- trol arms should not be contacting the limit stud on the transaxle. If they are, back the set screws out until they do not touch.

	Maximum
	Speed Tracking
T-Handle	Adjustment
Hex Wrench
Transmission
Control Arm

Maximum Speed Tracking Adjustment (Shown with Parts Removed for Clarity)

Step 5 - Straight Tracking Adjustment

1.Sit in the seat, start the engine, set throttle at full speed, and with the FSC in the NEUTRAL- PARK position check for movement of either drive wheel (if either wheel moves backward or forward, refer to Step 3 - Neutral Position Adjustment and readjust).

2.Check for straight ground tracking on a level surface (with hands off the steering levers). Set the FSC at several different speeds and observe if the machine moves in a straight line (use cement joint or other line on ground for reference).

3.If tracking is not straight, shorten the control rod on the faster side by turning the tracking adjustment nut clockwise. If straight tracking and neutral are both achieved proceed to the next step. If straight tracking and neutral cannot both be achieved, turn the tracking adjustment nut on the faster side counterclockwise until neutral is restored. Then, lengthen the control rod on the slower side by turning the tracking adjustment nut counterclockwise until straight tracking and neutral are both achieved.

IMPORTANT: After tracking adjustments are complete, confirm that there is at least one (1) thread visible on both control rods past the track- ing adjustment nuts.

4.If the machine is tracking straight throughout the speed range except at maximum speed, use the following adjustment procedure:

a.With the engine off, place the FSC in full FORWARD. On the faster transmission, loosen the jam nut and turn the maximum speed tracking adjustment set screw in un- til it just contacts the limit stud, and then turn it in an additional 1/8 turn (turning the set screw in slows the drive wheel).

b.Recheck maximum speed tracking, and if necessary continue adjusting the set screw in small increments until straight travel is achieved.

c.Tighten the jam nut.

Step 6 - FSC Neutral Switch Adjustment

1.Place the FSC lever in the NEUTRAL-PARKposition. Raise the body and adjust the switch adjustment bolt up until it just makes contact with the FSC switch plunger, and then turn the switch adjustment bolt up an additional two (2) turns and tighten the jam nut.

NOTE: It may be necessary to tighten the FSC friction adjustment if the transmissions are moved out of neutral when the body is raised. Refer to Step 7 - Forward Speed Control Fric- tion Adjustment later in this section for location of the FSC friction adjustment nut.

FSC Switch

FSC Neutral Switch Location

S14 specifications

The Walker S14 is an innovative piece of technology designed to enhance mobility and independence for individuals facing mobility challenges. This advanced mobility device integrates cutting-edge features and technologies to deliver a safe and comfortable user experience.

One of the standout characteristics of the Walker S14 is its lightweight yet robust design. Constructed from high-quality materials, the walker provides durability without sacrificing portability. It can easily be maneuvered both indoors and outdoors, making it suitable for various environments.

A significant technological advancement in the Walker S14 is its adjustable height feature. Users can customize the walker to their preferred height, ensuring optimal support and reducing strain on the body. This feature is particularly beneficial for individuals with varying mobility needs, as it promotes a proper walking posture.

Safety is a top priority in the design of the Walker S14. It is equipped with a reliable braking system that enhances stability when stationary. The walker features ergonomic hand grips that provide comfort and reduce the risk of slipping. Additionally, its non-slip wheels are designed to provide a reliable grip on various surfaces, contributing to a safer walking experience.

In terms of storage and convenience, the Walker S14 includes a built-in storage pouch, allowing users to carry personal items or essential belongings. This feature is particularly useful for users who wish to maintain their independence while being able to access their belongings easily.

The Walker S14 is also praised for its sleek and modern aesthetic. With a variety of color options, users can choose a design that reflects their personality while still benefiting from the practicality of the mobility device.

Moreover, the Walker S14 is designed for easy folding and portability. Whether for storage or transport, users can quickly collapse the walker to fit it in tight spaces or vehicles without any hassle.

Overall, the Walker S14 combines innovative technology, user-centric design, and robust safety features to provide an unparalleled walking experience. It empowers individuals with mobility challenges to navigate their surroundings with confidence, fostering independence and a better quality of life.