Grease Fitting and Oil Point Lubrication

Maintenance Instructions

LUBRICATION

Changing Engine Crankcase Oil

Change the engine crankcase oil after every 50 hours of operation as follows:

1.Park the mower on a level surface with the engine stopped. The engine oil should be warm before draining. If not warm from opera- tion, start the engine and run a few minutes to warm the oil.

2.Before removing the dipstick, clean the area around it to keep any dirt or debris out of the engine.

3.Remove the dipstick and oil drain plug, and drain oil into a suitable container. Be sure to allow ample time for complete drainage.

Oil Drain

Oil Drain Location

(View from Lower Right Side of Tractor)

Dipstick

(Oil Fill)

Dipstick (Oil Fill) Location

(View from Lower Right Side of Tractor)

4.Reinstall the drain plug. Make sure it is tight- ened to 16.5 lb·ft (23 N·m).

5.Fill the crankcase (through the dipstick open- ing) with oil using only crankcase lubricants rec- ommended by the engine manufacturer. Refer to Specifications in this manual or the engine owner’s manual. Use the recommended oil vis- cosity for the expected ambient temperature. Oil with the correct viscosity will aid starting in cold weather and assure proper lubrication in hot weather. Fill to FULL (H) mark on the dip- stick; crankcase capacity is 2.7 pints (1.3 liters).

IMPORTANT: Check the dipstick reading be fore adding the last 1/2 pint of oil and fill only to the FULL (H) mark. The oil level should never be over the FULL (H) mark on the dipstick; over- filling can result in engine overheating and loss of power.

6.Start and run the engine. Stop the engine, re- check the oil level, and add oil if necessary.

Grease Fitting and Oil Point Lubrication

Lubricate the grease fittings and oil points after every 25 hours of operation. Lubricate more often when operating in dusty or dirty conditions. Use SAE general purpose lithium or molybdenum base grease for grease fittings and light machine oil (SAE 10) to lubricate oil points. Lubricate the locations shown in the Chassis and Deck Lubrication Points illustration.

NOTE: PTO universal joints (on the deck and trac tor) require routine lubrication after every 8 hours of running time.

NOTE: The flange bearings on the PTO drive shaft are sealed and do not require periodic maintenance.

S14 specifications

The Walker S14 is an innovative piece of technology designed to enhance mobility and independence for individuals facing mobility challenges. This advanced mobility device integrates cutting-edge features and technologies to deliver a safe and comfortable user experience.

One of the standout characteristics of the Walker S14 is its lightweight yet robust design. Constructed from high-quality materials, the walker provides durability without sacrificing portability. It can easily be maneuvered both indoors and outdoors, making it suitable for various environments.

A significant technological advancement in the Walker S14 is its adjustable height feature. Users can customize the walker to their preferred height, ensuring optimal support and reducing strain on the body. This feature is particularly beneficial for individuals with varying mobility needs, as it promotes a proper walking posture.

Safety is a top priority in the design of the Walker S14. It is equipped with a reliable braking system that enhances stability when stationary. The walker features ergonomic hand grips that provide comfort and reduce the risk of slipping. Additionally, its non-slip wheels are designed to provide a reliable grip on various surfaces, contributing to a safer walking experience.

In terms of storage and convenience, the Walker S14 includes a built-in storage pouch, allowing users to carry personal items or essential belongings. This feature is particularly useful for users who wish to maintain their independence while being able to access their belongings easily.

The Walker S14 is also praised for its sleek and modern aesthetic. With a variety of color options, users can choose a design that reflects their personality while still benefiting from the practicality of the mobility device.

Moreover, the Walker S14 is designed for easy folding and portability. Whether for storage or transport, users can quickly collapse the walker to fit it in tight spaces or vehicles without any hassle.

Overall, the Walker S14 combines innovative technology, user-centric design, and robust safety features to provide an unparalleled walking experience. It empowers individuals with mobility challenges to navigate their surroundings with confidence, fostering independence and a better quality of life.