Walker S14 manual Engine Throttle, Choke and Throttle Location Forward Speed Control FSC

Page 30

Operating Instructions

Engine Throttle

The throttle control lever (red knob) is located on the left side of the seat and is used to control engine speed. Moving the lever forward toward the FAST position increases engine speed; moving it back- ward toward the IDLE position decreases engine speed.

Throttle Choke

Choke and Throttle Location

Forward Speed Control (FSC)

Forward Speed Control (FSC) has two functions: One is to set forward travel speed, and the other is to establish the NEUTRAL-PARKposition. When the FSC lever is moved into the FORWARD posi- tion, a friction lock holds any forward speed setting from 0 to 6.5 mph (0 to 10.5 km/h). The ground speed is proportional to the lever position; the fur- ther the lever is advanced forward, the faster the tractor moves. It is not necessary to hold the FSC in position since the friction lock maintains the se- lected lever position. Pulling back on the steering levers overrides the FSC setting and slows or stops forward travel. Releasing the steering levers allows the tractor to resume forward travel at the speed set by the FSC lever. To stop and park the machine, the FSC lever is moved backward to the NEUTRAL- PARK position.

Front Body Latch Release

The front portion of the tractor body hinges forward for maintenance access and is latched down in the OPERATING position. To raise the body, move the latch release backward.

Steering Levers

Each drive wheel is controlled by its own indepen- dent steering lever, for both steering function and FORWARD/REVERSE motion. The FSC lever sets the maximum forward speed, and also sets the for- ward position of the steering levers. The steering levers operate only with a backward pulling move- ment of the lever, which causes the drive wheel for that lever to first slow down, stop, and then reverse with a full backward lever stroke. The levers are released to the FORWARD position for “straight- ahead” ground travel.

NOTE: Pushing forward on the steering levers will not cause any change in tractor motion - there will be no steering lever reaction and there will be no machine damage.

Blade Clutch (PTO)

The blade clutch lever is located on the right side of the seat behind the right fender and is used to en- gage and disengage the mower blades. The blade clutch has two positions. Pushing the lever DOWN engages the PTO that drives the mower blades. Pulling the lever UP disengages the PTO and en- gages the blade brake.

NOTE: On GHS equipped models, the Powerfil® motor and Grass-Pak®full signal switch are acti- vated by engaging the blade clutch. Refer to Using the GHS Catcher in this section for a complete de- scription of GHS operation.

26

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Operator’s Manual Foreword Table of Contents Maintenance Schedule Chart Important Tips for Care Identifying Number Locations General InformationGlossary Fill In By PurchaserServicing of Engine and Drivetrain Components Electrical System SpecificationsEngine TransmissionBlade Drive Tire SizeTire Pressure PSI KPA Width in. cm Dimensions Tractor and Mower Length in. cmWeight lb kg Height in. cmMower Deck Drive BeltsSeat Component Identification Front View and Right Side ViewRear View and Left Side View Top View Body Raised Safety Instructions Before Operating Before OperatingDo not mow with bystanders in the area Safety Instructions Before Operating Safety Instructions Operating Safety Instructions Operating Safety Instructions Maintenance Location Gearbox Cover Gear Drive Decks Only Part Number Safety InstructionsLocation Top of Fuel Tank Part Number Location Chassis Member Behind Transaxles Part NumberLocation Each End of Mower Deck Part Number Location Deck Discharge Shield SD Decks Only Part NumberLocation Deck Gearbox Cover Part Number Location LH Fender Part Number Location RH Fender Part NumberAssembly Instructions Setup InstructionsBattery Service Deck Caster Wheels Installation Battery InstallationBattery Installation Mower Deck Assembly Batteries Produce Explosive GasesDeck Caster Wheel Installation Discharge Shield Installation On Side Discharge DeckPTO Shaft Guard Installation Deck Counterweight Spring Installation Deck InstallationMower Deck Installation PTO Shaft ConnectionMachine must be shut off during this procedure Deck LevelingDeck Leveling Fill Fuel Tank Refer to Lubrication for Transaxle LubricationBlades in Maintenance Instructions Control IDENTIFICATION, LOCATION, and Function Ignition Switch Key PositionsOperating Instructions Engine ChokeSteering Levers Engine ThrottleChoke and Throttle Location Forward Speed Control FSC Blade Clutch PTOParking Brake Hydro Lockout Arm LocationHourmeter Left Wheel Steering Leverright Wheel Operating Controls Top View from Drivers Point of ViewAdjusting Ground Speed and Steering Starting the EngineEngaged Forward Speed Control Friction Adjustment Beginning Recommendations areCorrect Operator Hand Position On the Controls Blade Clutch Engaged Stopping the MachineHydro Lockout Arm Freewheel Position Cutting Height AdjustmentTransaxle Lockouts Hydro Lockout Arm Normal Operating PositionRecommendations for Mowing Side Discharge Deflector Shield Lowest Position No Driving ZoneRecommendations for TILT-UP Deck OPERATION/TRANSPORT GHS Model Only GHS Flow and ComponentsGeneral Information Rotating Blower BladesClogging Checklist ForwardUsing the Tilt-Up Deck PowerfilFull Signal Horn Tailgate Dumping Using the Dump Bag Positioning Dump Bag on CatcherDumping Catcher into Dump Bag Service Item 100 400 Every Maintenance InstructionsMaintenance procedures requiring special training or HoursImportant Tips for Care of the Subaru Engine Lubrication Each USENot Screwed Oil Drain Location View from Lower Right Side of Tractor Grease Fitting and Oil Point LubricationDeck and Carrier Frame Illustrated Maintenance Instructions Mower Deck Gearbox Lubrication Transaxle LubricationExpansion Reservoir Location Guard Cleaning Air Cleaner Components Shown with Cover RemovedEngine Air Cleaner System Components Air Filter Element Replacement Proper Orientation of Air Cleaner Cover Fuel FilterFuel Filter and Fuel Shut-off Valve Location Keep Rotating Engine Cooling Air Intake Screen Clean Cooling Air Intake ScreenCooling System Airflow GHS Exhaust Screen Battery Transaxle HousingTransaxle Housing and Cooling Fins Transaxle Cooling FansWheel Nut Torque Charging the BatteryTire Pressure Sharpen Mower BladesMower Blade Profile for Sharpening Blade Balanced on Magnetic Wall-Mounted BalancerDrive Belts Spark PlugIgnition Forward Speed Control Friction Lock REPLACING/REPAIRING Belt LocationsEngine Belt Engine Belt DisengagedEngine Belt Engaged PTO Drive Belt PTO Drive Belt DisengagedPTO Drive Belt Engaged Ground Drive Belt Assembly Disengaged Ground Drive Belt Assembly EngagedGround Drive Belt Blade Overload Shear Bolts Cutting Blade Shear BoltsPTO Shear Pin Mower Blades Transmission Control AdjustmentsSteering Lever Position Adjustment Lever AlignmentSteering Handles Adjustment FSC Lever Position AdjustmentCorrect FSC Lever NEUTRAL-PARK Position Maintenance Instructions FSC Neutral Switch Location FSC Friction Adjustment Test FSC Friction Adjustment NutPTO Clutch Engaged PTO Clutch Disengaged Blade Brake Band Adjustment Blade Brake Band Adjustment Clutch Disengaged Side View of Catcher Box Adjusting the Grass-PakSwitchPinch Point Spring Loaded Door With a little advance warning before overfillingOperator’s Notes Operator’s Notes Limited Warranty For Walker Model S14 Rider Mower Walker MFG. CO E. Harmony ROAD, Fort COLLINS, CO 80528 970

S14 specifications

The Walker S14 is an innovative piece of technology designed to enhance mobility and independence for individuals facing mobility challenges. This advanced mobility device integrates cutting-edge features and technologies to deliver a safe and comfortable user experience.

One of the standout characteristics of the Walker S14 is its lightweight yet robust design. Constructed from high-quality materials, the walker provides durability without sacrificing portability. It can easily be maneuvered both indoors and outdoors, making it suitable for various environments.

A significant technological advancement in the Walker S14 is its adjustable height feature. Users can customize the walker to their preferred height, ensuring optimal support and reducing strain on the body. This feature is particularly beneficial for individuals with varying mobility needs, as it promotes a proper walking posture.

Safety is a top priority in the design of the Walker S14. It is equipped with a reliable braking system that enhances stability when stationary. The walker features ergonomic hand grips that provide comfort and reduce the risk of slipping. Additionally, its non-slip wheels are designed to provide a reliable grip on various surfaces, contributing to a safer walking experience.

In terms of storage and convenience, the Walker S14 includes a built-in storage pouch, allowing users to carry personal items or essential belongings. This feature is particularly useful for users who wish to maintain their independence while being able to access their belongings easily.

The Walker S14 is also praised for its sleek and modern aesthetic. With a variety of color options, users can choose a design that reflects their personality while still benefiting from the practicality of the mobility device.

Moreover, the Walker S14 is designed for easy folding and portability. Whether for storage or transport, users can quickly collapse the walker to fit it in tight spaces or vehicles without any hassle.

Overall, the Walker S14 combines innovative technology, user-centric design, and robust safety features to provide an unparalleled walking experience. It empowers individuals with mobility challenges to navigate their surroundings with confidence, fostering independence and a better quality of life.
Top Page Image Contents