Woods Equipment MD80-2 manual D80-2 Front 2/3 of 3-JOINT Drive Square Shaft, Complete Drive

D80-2 FRONT 2/3 OF 3-JOINT DRIVE (SQUARE SHAFT)

NOTE: Two styles of driveshafts have been used on the D80 series cutters. Check your driveshaft for square or two--lobe shaft and order repair parts from the correct parts list.

2

1 -- COMPLETE DRIVE

18

20

14

13

3

16

20

15CD3873B

17

23

21

1910

3 6

11

22

4	7	8	9
5			12	21

REF	PART	QTY	DESCRIPTION
1	19054	1	Front 2/3 of 3-joint drive 35N
2	44919	1	Front 2 joints shielded 35N
3	110	2	U-Joint repair kit 35N
4	117	1	Lock pin and spring
5	115	1	1-3/8 Quick disconnect yoke 35N
6	1251	1	Bearing holder with bearing (includes
			7, 8 & 9)
7	12128	1	.062 x 72 mm ID Snap ring
8	3502	1	1.37 ID x 2.83 OD Ball bearing
9	2985*	-	1/4 - 28 Threaded 90-degree grease
			fitting
10	19036	1	Decaled tube, sleeve & stub, 24.38
11	15952	1	Plastic shield 2.75 x 17.69 (includes
			items 12 & 21)
12	15141	4	Bearing for tubular shaft

REF	PART	QTY	DESCRIPTION
13	1311	1	1/2 NF x 1 HHCS, drilled head
14	-----*	1	1/2 x 1-1/2 x 1/8 Flat washer
15	105	1	1-5/16 Bore universal joint yoke 35N
16	19043	1	Yoke
17	4674	1	3/8 x 2 Spirol pin
18	19045	1	Shield, decaled 2-joint 21.94
			(includes items 20 & 21)
19	4663	1	Square shaft & yoke 35N
20	15740	2	World shield bearing
21	15739	3	World shield tether chain 27.5
22	19609	1	Plastic shield kit (includes items 11 &
			23)
23	19038	1	Shield, decaled
		*	Obtain Locally - Standard Hardware

42 Parts 15914 (Rev. 3/23/2007)