OPTIONAL CHECK CHAIN INSTALLATION
Attach chain (9) to cutter mast plate (2) with bolt (1), washer (3) and nut (4) as shown. Repeat for opposite mast plate.
Attach one check chain bracket (7) to each side of the tractor top link bracket (6) with bolt (5) and nut (8) as shown.
The check chains may be adjusted to set the front cut- ting height of the cutter.
1 | 2 |
9 |
|
| 3 |
8 |
|
7 | 4 |
| |
6 | CD3826 |
| |
| 5 |
1. | 5/8 x |
2. | Cutter mast plate |
3. | 5/8" Flat washer |
4. | 5/8" Hex lock nut |
5. | 3/4 x 6" Bolt |
6. | Tractor top link bracket |
7. | Check chain bracket |
8. | 3/4" Hex lock nut |
9. | 3/8" Chain, |
Figure 28. Optional Check Chain Installation
15914 (Rev. 5/11/2007) | Assembly 35 |
|
|