SPECIFICATIONS
| ||
Cutting Width | 80" | 80" |
Cutting Height | 2" - 14" | 2" (Limited by tractor lift) |
Overall Width | 83" | 83" |
Cutter Blade Spindles | 2 | 2 |
Blade Tip Speed | 14,400 | 14,400 |
3 | 3 | |
Framework Channel | 5/16" | 5/16" |
Spindle Shafts | ||
Gearbox | 60 HP | 60 HP |
TRACTOR REQUIREMENTS
| ||
Tractor PTO | 540 rpm | 540 rpm |
N/A | Category 1 | |
|
| (Category 2 Optional) |
GENERAL INFORMATION
The purpose of this manual is to assist you in operating and maintaining your cutter. Read it carefully. It fur- nishes information and instructions that will help you achieve years of dependable performance. These instructions have been compiled from extensive field experience and engineering data. Some information may be general in nature due to unknown and varying operating conditions. However, through experience and these instructions, you should be able to develop procedures suitable to your particular situation.
The illustrations and data used in this manual were cur- rent at the time of printing, but due to possible inline production changes, your machine may vary slightly in
detail. We reserve the right to redesign and change the machines as may be necessary without notification.
WARNING
■Some illustrations in this manual show the equipment with safety shields removed to provide a better view. The equipment should never be oper- ated with any safety shielding removed.
4 Introduction | 15914 (Rev. 3/23/2007) |
|
|