Woods Equipment MZ3761K-DFI, MZ3772K-DFI manual Battery, Storage Safety, Jump Starting

Page 11

WOODS

SAFETY

BATTERY

WARNING

Battery acid is caustic and fumes

 

are explosive and can cause seri-

 

ous injury or death.

 

To reduce the risk of personal in-

 

jury when working near a battery:

 

–When working with battery acid, use protective equip- ment such as, but not limited to,

goggles, face shield, rubber gloves and apron.

–Avoid leaning over a battery.

–Do not expose a battery to open flames or sparks.

–Be sure batteries with filler caps are properly filled with fluid.

–Do not allow battery acid to contact eyes or skin. Flush any contacted area with water immediately and get medical help.

–Charge batteries in an open, well ventilated area, away from sparks and flames. Unplug charger before connecting or disconnecting from bat- tery.

STORAGE SAFETY

–Stop the engine and allow to cool before storing.

–Drain the fuel tank outdoors only.

–Store fuel in an approved container in a cool, dry place.

–Keep the machine and fuel containers in a locked storage place to prevent tampering and to keep children from playing with them.

–When the machine is to be parked, stored or left unattended, lower the cutterdeck unless a posi- tive mechanical lock is used.

–Do not store the machine or fuel container near heating appliances with an open flame such as a water heater or an appliance with a pilot light.

–Keep gasoline storage area free of grass, leaves and excessive grease to reduce fire hazard.

JUMP STARTING

1.Be sure the jumper cables are in good condition. Turn off the ignition and all electrical accessories on both machines.

2.Position the machine with a good (charged) bat- tery next to but not touching the machine with the dead battery so jumper cables will reach.

3.When making cable connections:

-make sure the clamps do not touch anywhere except to intended metal parts,

-Never connect a positive ("+" or red) terminal to a negative ("–" or black) terminal.

-Make sure the cables won't get caught in any parts after the engines are started.

4.Connect one end of the first jumper cable to the positive terminal on one battery. Connect the other end to the positive terminal on the other battery.

5.Connect one end of the other cable to the negative terminal of the machine with a good

(charged) battery. Make the final connection on the engine of the machine to be started, away from the battery.

6.Start the vehicle with the good battery, then the machine with the discharged battery.

7.Remove the cables in the exact reverse order of installation. When removing each clamp, take care it does not touch any other metal parts while the other end remains attached.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents OPERATOR’S Manual Wash Hands After Handling CaliforniaAlitec BMP Central Fabricators Gannon Gill WAIN-ROY Woods Important MessageTo the Dealer To the OwnerTable of Contents Become Alert SafetyPreparing for Safe Operation Starting Machine Operation Operating SafelyGeneral Maneuvering Safely Interrupting operationSeat Belt Useage Mowing SlopesHydraulic System Maintenance Safety GeneralBlades FuelJump Starting BatteryStorage Safety Labels Hydraulic OIL Operators Manual is Located Under the Foot Plate TRANSPORT5 N N DFI operators right side Power Take OFF PTO Switch PTurns during reverse movement Lift and traction levers operators right sideTurns during forward movement Located on oil cooler bracket behind seat DFI Fule Valves V- a fuel tank selectorCompartment beneath the seat Viewed from above Foot Lift PedalPushing the Machine Parking brake in on position Operators left sidePRE-OPERATION Check List OWNER’S Responsibility PRE-OPERATION Check ListStarting the Engine FuelingBefore Starting the Engine Operator Presence Interlock SystemDriving Operating NotesCutting Tips CuttingFirst Every Daily EngineHydraulics MachineMaintenance Record Check Daily BatteryLubrication Periodic OIL Changes Hydraulic SystemAfter First Five 5 Hours Fuel Filter Engine OILSpark Plugs Engine Cooling Heavy Duty Cyclonic AIR CleanerTo replace air cleaner elements Washing Machine Cleaning MachineBlade Balance Blade InstallationBlade Removal SharpeningCounterbalance Springs Deck LevelingFront Deck LIP Height of cut ranges for roller adjustmentHeight of CUT Rear Deck RollersFor clarity brake in on position Parking brake assembly tire and deck not shownControl Levers Parking BrakeReverse Return Hydrostat AdjustmentsRight side adjustments NeutralDampers Cutterdeck BeltTracking Handles PUMP-DRIVE Belt Belt ReplacementLimited Warranty 8495 MM & Boundary Repair Parts Rev /15/2006 Woods Equipment Company

MZ3772K-DFI, MZ3761K-DFI specifications

The Woods Equipment MZ3761K-DFI and MZ3772K-DFI are the latest additions to the esteemed line of compact tractors, providing advanced technology and robust performance for both commercial and agricultural applications. These models are designed with a keen focus on user efficiency and ease of operation, making them suitable for a wide range of tasks such as landscaping, mowing, and general property maintenance.

One of the standout features of both the MZ3761K-DFI and MZ3772K-DFI is their powerful diesel engine. These tractors are equipped with Direct Fuel Injection (DFI) systems that ensure optimal fuel efficiency and reduced emissions, contributing to a more sustainable operational footprint. The engines also offer a seamless power delivery that enhances performance during challenging tasks, whether navigating rugged terrain or handling heavy attachments.

The MZ series features a user-friendly hydrostatic transmission that provides smooth operation and allows operators to effortlessly manage speed and direction with minimal effort. This feature is particularly beneficial for maneuvering in tight spaces or when executing precise tasks, making it a favorite among operators who value comfort and efficiency.

Both models come equipped with advanced hydraulic systems that enable enhanced lifting capabilities. This is particularly useful for tasks such as loading and moving materials. The hydraulic lift arms can accommodate a variety of attachments, from loaders to brush cutters, offering versatility to handle diverse applications.

These tractors are designed with operator comfort in mind, featuring ergonomically designed controls and spacious operator platforms. The adjustable seats ensure long hours of work can be performed without discomfort, while the visibility from the operator's seat allows for safe maneuvering around job sites.

In terms of build quality, the MZ3761K-DFI and MZ3772K-DFI boast heavy-duty construction that translates to durability and reliability. With robust frames and high-quality components, these tractors are built to endure rigorous use and provide dependable service over time.

Moreover, both models integrate advanced safety features, including roll-over protective structures (ROPS) and safety interlocks, ensuring that operators can work with confidence.

In summary, the Woods Equipment MZ3761K-DFI and MZ3772K-DFI are truly versatile compact tractors that deliver exceptional power, efficiency, and operator comfort. Their innovative technologies and robust build make them a worthy investment for professionals seeking reliable performance in their daily operations.
Top Page Image Contents