Woods Equipment MZ3761K-DFI, MZ3772K-DFI manual Check Daily, Battery

Page 27

WOODS

MAINTENANCE

CHECK DAILY

Operator Presence Interlock System - Start Operation

For the engine to crank, the parking brake must be on, the PTO (blades) off and traction levers in the neutral lock position. Sit in the seat and check, one by one, if the engine will crank with the parking brake off, the blades on, and either traction lever out of neutral lock.

Operator Presence Interlock System - Run Operation

The operator must be in the seat for the engine to run with the parking brake off, the traction levers moved out of the neutral lock position, or the blades on. To check:

1.Start the engine and run at 1/2 throttle with the operator on the machine but raised off the seat.

2.One by one: move the parking brake to the OFF position, traction levers out of the neutral lock position (check each independently), and turn the blades on. Each check should kill the engine after 1/2 second. (A 1/2 second delay is built into the system to prevent engine cutout when traversing rough terrain.)

Repair machine before using if the Operator Presence Interlock System does not operate correctly in start or run. Contact your authorized Schiller Grounds Care, Inc. dealer.

Hardware

Tighten any nuts and bolts found loose. Replace any broken or missing cotter pins. Repair any other prob- lems before operating.

Tire pressure

Tires should be kept inflated at 14 lbs/in2 (1.0 kg/cm2). Improper tire inflation can cause rapid tire wear and poor traction. Uneven inflation can cause uneven cutting.

BATTERY

Battery acid is caustic and fumes are explosive and can cause serious injury or death.

Use insulated tools, wear protective glasses or goggles and protective clothing when working with batteries. Read and obey the battery manufacturer’s instructions.

Be certain the ignition switch is OFF and the key has been removed before servicing the battery.

1.Verify battery polarity before connecting or dis- connecting the battery cables.

2.When installing the battery, always assemble the RED, positive ( + ) battery cable first and the ground, BLACK, negative ( - ) cable last.

3.When removing the battery, always remove the ground, negative ( - ) cable first and the red, posi- tive ( + ) cable last.

4.Check the electrolyte level every 100 hours of operation.

5.Clean the cable ends and battery posts with steel wool. Use a solution of baking soda and water to clean the battery. Do not allow the solution to enter into the battery cells.

6.Tighten cables securely to battery terminals and apply a light coat of silicone dielectric grease to terminals and cable ends to prevent corrosion.

Keep terminal covers in place.

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents OPERATOR’S Manual Wash Hands After Handling CaliforniaAlitec BMP Central Fabricators Gannon Gill WAIN-ROY Woods Important MessageTo the Dealer To the OwnerTable of Contents Become Alert SafetyPreparing for Safe Operation Machine Operation Operating Safely GeneralStarting Maneuvering Safely Interrupting operationSeat Belt Useage Mowing SlopesHydraulic System Maintenance Safety GeneralBlades FuelBattery Storage SafetyJump Starting Labels Hydraulic OIL Operators Manual is Located Under the Foot Plate TRANSPORT5 N N DFI operators right side Power Take OFF PTO Switch PLift and traction levers operators right side Turns during forward movementTurns during reverse movement Located on oil cooler bracket behind seat DFI Fule Valves V- a fuel tank selectorCompartment beneath the seat Viewed from above Foot Lift PedalPushing the Machine Parking brake in on position Operators left sidePRE-OPERATION Check List OWNER’S Responsibility PRE-OPERATION Check ListStarting the Engine FuelingBefore Starting the Engine Operator Presence Interlock SystemDriving Operating NotesCutting Tips CuttingFirst Every Daily EngineHydraulics MachineMaintenance Record Check Daily BatteryLubrication Hydraulic System After First Five 5 HoursPeriodic OIL Changes Engine OIL Spark PlugsFuel Filter Heavy Duty Cyclonic AIR Cleaner To replace air cleaner elementsEngine Cooling Washing Machine Cleaning MachineBlade Balance Blade InstallationBlade Removal SharpeningCounterbalance Springs Deck LevelingFront Deck LIP Height of cut ranges for roller adjustmentHeight of CUT Rear Deck RollersFor clarity brake in on position Parking brake assembly tire and deck not shownControl Levers Parking BrakeReverse Return Hydrostat AdjustmentsRight side adjustments NeutralCutterdeck Belt Tracking HandlesDampers PUMP-DRIVE Belt Belt ReplacementLimited Warranty 8495 MM & Boundary Repair Parts Rev /15/2006 Woods Equipment Company

MZ3772K-DFI, MZ3761K-DFI specifications

The Woods Equipment MZ3761K-DFI and MZ3772K-DFI are the latest additions to the esteemed line of compact tractors, providing advanced technology and robust performance for both commercial and agricultural applications. These models are designed with a keen focus on user efficiency and ease of operation, making them suitable for a wide range of tasks such as landscaping, mowing, and general property maintenance.

One of the standout features of both the MZ3761K-DFI and MZ3772K-DFI is their powerful diesel engine. These tractors are equipped with Direct Fuel Injection (DFI) systems that ensure optimal fuel efficiency and reduced emissions, contributing to a more sustainable operational footprint. The engines also offer a seamless power delivery that enhances performance during challenging tasks, whether navigating rugged terrain or handling heavy attachments.

The MZ series features a user-friendly hydrostatic transmission that provides smooth operation and allows operators to effortlessly manage speed and direction with minimal effort. This feature is particularly beneficial for maneuvering in tight spaces or when executing precise tasks, making it a favorite among operators who value comfort and efficiency.

Both models come equipped with advanced hydraulic systems that enable enhanced lifting capabilities. This is particularly useful for tasks such as loading and moving materials. The hydraulic lift arms can accommodate a variety of attachments, from loaders to brush cutters, offering versatility to handle diverse applications.

These tractors are designed with operator comfort in mind, featuring ergonomically designed controls and spacious operator platforms. The adjustable seats ensure long hours of work can be performed without discomfort, while the visibility from the operator's seat allows for safe maneuvering around job sites.

In terms of build quality, the MZ3761K-DFI and MZ3772K-DFI boast heavy-duty construction that translates to durability and reliability. With robust frames and high-quality components, these tractors are built to endure rigorous use and provide dependable service over time.

Moreover, both models integrate advanced safety features, including roll-over protective structures (ROPS) and safety interlocks, ensuring that operators can work with confidence.

In summary, the Woods Equipment MZ3761K-DFI and MZ3772K-DFI are truly versatile compact tractors that deliver exceptional power, efficiency, and operator comfort. Their innovative technologies and robust build make them a worthy investment for professionals seeking reliable performance in their daily operations.
Top Page Image Contents