Woods Equipment MZ3761K-DFI, MZ3772K-DFI Machine Operation Operating Safely, General, Starting

Page 7

WOODS

SAFETY

MACHINE OPERATION

OPERATING SAFELY

 

– Check operator present interlock system and

In general

brake operation. Adjust or repair any problems

– Use extra care when loading or unloading the

before using.

machine onto a trailer or truck.

– Do not tamper with or defeat safety devices.

– Watch out for traffic when near or crossing

Keep guards, shields and interlock safety devices

roadways.

in place and in proper working condition. They

– Do not run the engine in an enclosed area where

are for your protection.

dangerous carbon monoxide fumes can collect.

– Keep all fasteners such as nuts, bolts and pins

– Do not place your foot on the ground while

well secured.

operating the machine.

– Visually inspect blades, blade bolts and the cutter

– Before operating, lower the discharge chute,

assembly for wear or damage. Replace worn or

install the mulcher or put the entire grass catcher

damaged blades and bolts to preserve balance.

in place.

– Verify that machine and attachments, if any, are

– Keep clear of the discharge opening at all times.

in good operating condition.

Never direct the discharge toward a bystander.

– Do not engage blades until ready to mow.

Stop operation if someone approaches.

 

– Keep washout ports and other mower housing

 

service openings closed when mowing.

 

– Use care when pulling loads or using heavy

 

equipment.

 

-

Use only approved drawbar hitch points.

 

-

Limit loads to those you can safely control.

 

-

Do not turn sharply. Use care when reversing.

 

-

Use counterweight(s) or wheel weights when

 

 

suggested in the operator's manual.

 

– Never leave a machine unattended. Always turn

 

off blades, set parking brake, stop engine and

 

remove keys before dismounting.

Starting

– Start only according to instructions in this manual or on the machine.

– Before attempting to start the engine, make sure:

- the parking brake is on; - the PTO is disengaged;

- the traction drive is in NEUTRAL.

– When starting the engine, make sure hands and feet are clear of the blades.

– Do not start the machine while standing in front of the discharge chute or with the chute directed at someone.

– Do not engage PTO at full throttle. Throttle to idle or lowest possible engine speed.

– Do not change engine governor settings or overspeed the engine. Operating the engine at excessive speed can increase the hazard of personal injury.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents OPERATOR’S Manual Wash Hands After Handling CaliforniaAlitec BMP Central Fabricators Gannon Gill WAIN-ROY Woods Important MessageTo the Dealer To the OwnerTable of Contents Become Alert SafetyPreparing for Safe Operation General Machine Operation Operating SafelyStarting Maneuvering Safely Interrupting operationSeat Belt Useage Mowing SlopesHydraulic System Maintenance Safety GeneralBlades FuelStorage Safety BatteryJump Starting Labels Hydraulic OIL Operators Manual is Located Under the Foot Plate TRANSPORT5 N N DFI operators right side Power Take OFF PTO Switch PTurns during forward movement Lift and traction levers operators right sideTurns during reverse movement Located on oil cooler bracket behind seat DFI Fule Valves V- a fuel tank selectorCompartment beneath the seat Viewed from above Foot Lift PedalPushing the Machine Parking brake in on position Operators left sidePRE-OPERATION Check List OWNER’S Responsibility PRE-OPERATION Check ListStarting the Engine FuelingBefore Starting the Engine Operator Presence Interlock SystemDriving Operating NotesCutting Tips CuttingFirst Every Daily EngineHydraulics MachineMaintenance Record Check Daily BatteryLubrication After First Five 5 Hours Hydraulic SystemPeriodic OIL Changes Spark Plugs Engine OILFuel Filter To replace air cleaner elements Heavy Duty Cyclonic AIR CleanerEngine Cooling Washing Machine Cleaning MachineBlade Balance Blade InstallationBlade Removal SharpeningCounterbalance Springs Deck LevelingFront Deck LIP Height of cut ranges for roller adjustmentHeight of CUT Rear Deck RollersFor clarity brake in on position Parking brake assembly tire and deck not shownControl Levers Parking BrakeReverse Return Hydrostat AdjustmentsRight side adjustments NeutralTracking Handles Cutterdeck BeltDampers PUMP-DRIVE Belt Belt ReplacementLimited Warranty 8495 MM & Boundary Repair Parts Rev /15/2006 Woods Equipment Company

MZ3772K-DFI, MZ3761K-DFI specifications

The Woods Equipment MZ3761K-DFI and MZ3772K-DFI are the latest additions to the esteemed line of compact tractors, providing advanced technology and robust performance for both commercial and agricultural applications. These models are designed with a keen focus on user efficiency and ease of operation, making them suitable for a wide range of tasks such as landscaping, mowing, and general property maintenance.

One of the standout features of both the MZ3761K-DFI and MZ3772K-DFI is their powerful diesel engine. These tractors are equipped with Direct Fuel Injection (DFI) systems that ensure optimal fuel efficiency and reduced emissions, contributing to a more sustainable operational footprint. The engines also offer a seamless power delivery that enhances performance during challenging tasks, whether navigating rugged terrain or handling heavy attachments.

The MZ series features a user-friendly hydrostatic transmission that provides smooth operation and allows operators to effortlessly manage speed and direction with minimal effort. This feature is particularly beneficial for maneuvering in tight spaces or when executing precise tasks, making it a favorite among operators who value comfort and efficiency.

Both models come equipped with advanced hydraulic systems that enable enhanced lifting capabilities. This is particularly useful for tasks such as loading and moving materials. The hydraulic lift arms can accommodate a variety of attachments, from loaders to brush cutters, offering versatility to handle diverse applications.

These tractors are designed with operator comfort in mind, featuring ergonomically designed controls and spacious operator platforms. The adjustable seats ensure long hours of work can be performed without discomfort, while the visibility from the operator's seat allows for safe maneuvering around job sites.

In terms of build quality, the MZ3761K-DFI and MZ3772K-DFI boast heavy-duty construction that translates to durability and reliability. With robust frames and high-quality components, these tractors are built to endure rigorous use and provide dependable service over time.

Moreover, both models integrate advanced safety features, including roll-over protective structures (ROPS) and safety interlocks, ensuring that operators can work with confidence.

In summary, the Woods Equipment MZ3761K-DFI and MZ3772K-DFI are truly versatile compact tractors that deliver exceptional power, efficiency, and operator comfort. Their innovative technologies and robust build make them a worthy investment for professionals seeking reliable performance in their daily operations.
Top Page Image Contents