Woods Equipment MZ3761K-DFI Hydraulic System, After First Five 5 Hours, Periodic OIL Changes

Page 29

WOODS

MAINTENANCE

HYDRAULIC SYSTEM

Fluid level in the hydraulic system should be checked after the first 5 hours of operation, and every 100 hours thereafter, or when a leak has occurred. If the fluid is low, check all components for leaks.

To check, remove reservoir cap M. The fluid level should be at the bottom of the filler tube. If low, top up (do not overfill). Use one of the oils listed below:

– SAE 15W40 motor oil

– SAE 20W50 motor oil

– 15W50 synthetic motor oil

AFTER FIRST FIVE (5) HOURS

1. Remove plug N to drain hydraulic reservoir. Dis- pose of used oil in accordance with local require- ments.

2. Clean and replace the plug.

3. Change hydraulic oil filter G.

4. Fill the reservoir with fresh oil to the bottom of

the reservoir filler tube, using an oil from the list above. Do not overfill.

PERIODIC OIL CHANGES

Change the hydraulic fluid and hydraulic filter after each 500 hours of operation using the same procedure given above.

NOTES:

View from below machine

Before servicing the hydraulic system, stop the engine,

disconnect spark plug wires and disengage the PTO.

 

– After any hydraulic line is opened, plug or cap it

 

promptly to reduce the risk of contamination.

 

– Do not use sealant tape on hydraulic pipe fittings.

 

Use a liquid sealant that will dissolve into the

 

system.

 

– Make sure all hydraulic connections are tight and

 

hydraulic hoses and lines are in good condition

 

before applying pressure to system.

 

The machine's hydraulic system operates under high

 

pressure. When checking for leaks, do not use your

 

hands to attempt to find a leak. Instead, use card-

 

board or paper. Escaping hydraulic fluid can be under

 

sufficient pressure to penetrate skin and cause serious

 

injury. If hydraulic fluid is injected into the skin, it must

 

be promptly removed by a doctor familiar with this form

 

of injury or gangrene may result.

 

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents OPERATOR’S Manual Wash Hands After Handling CaliforniaTo the Dealer Important MessageTo the Owner Alitec BMP Central Fabricators Gannon Gill WAIN-ROY WoodsTable of Contents Become Alert SafetyPreparing for Safe Operation Starting Machine Operation Operating SafelyGeneral Maneuvering Safely Interrupting operationSeat Belt Useage Mowing SlopesBlades Maintenance Safety GeneralFuel Hydraulic SystemJump Starting BatteryStorage Safety Labels Hydraulic OIL Operators Manual is Located Under the Foot Plate TRANSPORT5 N N DFI operators right side Power Take OFF PTO Switch PTurns during reverse movement Lift and traction levers operators right sideTurns during forward movement Located on oil cooler bracket behind seat DFI Fule Valves V- a fuel tank selectorPushing the Machine Foot Lift PedalParking brake in on position Operators left side Compartment beneath the seat Viewed from abovePRE-OPERATION Check List OWNER’S Responsibility PRE-OPERATION Check ListBefore Starting the Engine FuelingOperator Presence Interlock System Starting the EngineDriving Operating NotesCutting Tips CuttingHydraulics EngineMachine First Every DailyMaintenance Record Check Daily BatteryLubrication Periodic OIL Changes Hydraulic SystemAfter First Five 5 Hours Fuel Filter Engine OILSpark Plugs Engine Cooling Heavy Duty Cyclonic AIR CleanerTo replace air cleaner elements Washing Machine Cleaning MachineBlade Removal Blade InstallationSharpening Blade BalanceCounterbalance Springs Deck LevelingHeight of CUT Height of cut ranges for roller adjustmentRear Deck Rollers Front Deck LIPControl Levers Parking brake assembly tire and deck not shownParking Brake For clarity brake in on positionRight side adjustments Hydrostat AdjustmentsNeutral Reverse ReturnDampers Cutterdeck BeltTracking Handles PUMP-DRIVE Belt Belt ReplacementLimited Warranty 8495 MM & Boundary Repair Parts Rev /15/2006 Woods Equipment Company

MZ3772K-DFI, MZ3761K-DFI specifications

The Woods Equipment MZ3761K-DFI and MZ3772K-DFI are the latest additions to the esteemed line of compact tractors, providing advanced technology and robust performance for both commercial and agricultural applications. These models are designed with a keen focus on user efficiency and ease of operation, making them suitable for a wide range of tasks such as landscaping, mowing, and general property maintenance.

One of the standout features of both the MZ3761K-DFI and MZ3772K-DFI is their powerful diesel engine. These tractors are equipped with Direct Fuel Injection (DFI) systems that ensure optimal fuel efficiency and reduced emissions, contributing to a more sustainable operational footprint. The engines also offer a seamless power delivery that enhances performance during challenging tasks, whether navigating rugged terrain or handling heavy attachments.

The MZ series features a user-friendly hydrostatic transmission that provides smooth operation and allows operators to effortlessly manage speed and direction with minimal effort. This feature is particularly beneficial for maneuvering in tight spaces or when executing precise tasks, making it a favorite among operators who value comfort and efficiency.

Both models come equipped with advanced hydraulic systems that enable enhanced lifting capabilities. This is particularly useful for tasks such as loading and moving materials. The hydraulic lift arms can accommodate a variety of attachments, from loaders to brush cutters, offering versatility to handle diverse applications.

These tractors are designed with operator comfort in mind, featuring ergonomically designed controls and spacious operator platforms. The adjustable seats ensure long hours of work can be performed without discomfort, while the visibility from the operator's seat allows for safe maneuvering around job sites.

In terms of build quality, the MZ3761K-DFI and MZ3772K-DFI boast heavy-duty construction that translates to durability and reliability. With robust frames and high-quality components, these tractors are built to endure rigorous use and provide dependable service over time.

Moreover, both models integrate advanced safety features, including roll-over protective structures (ROPS) and safety interlocks, ensuring that operators can work with confidence.

In summary, the Woods Equipment MZ3761K-DFI and MZ3772K-DFI are truly versatile compact tractors that deliver exceptional power, efficiency, and operator comfort. Their innovative technologies and robust build make them a worthy investment for professionals seeking reliable performance in their daily operations.
Top Page Image Contents