Woods Equipment MZ3772K-DFI, MZ3761K-DFI manual Lift and traction levers operators right side

Page 18

CONTROLS

WOODS

Lift and traction levers (operator's right side)

HEIGHT OF CUT PIN (C) - Sets height of cut and allows easy return from transport to desired height of cut. Raise the deck to transport with the lift lever F. Position pin C in the hole corresponding to th desired height of cut. Lower the lift lever until it rests on pin C.

TRACTION LEVERS (L) - Each of the two trac- tion levers controls the drive wheel located on the same side. They control the forward and reverse movement of the machine, provide steering and also provide dynamic braking.

The operator must be in the seat and the parking brake must be OFF or the traction drive cannot be engaged. To engage traction drive, move the traction levers toward the center of the machine until they are out of neutral lock slot S.

Forward movement - To move the machine straight ahead, push both traction levers forward equally from their neutral position. Forward speed increases as the levers are moved farther forward from the neutral position. Maximum forward speed is reached when the levers hit the front of the forward-reverse slot. When traveling forward, pulling the traction levers rearward slows the machine, and the machine stops when the neutral position is reached.

Reverse movement - To move the machine straight back, pull both traction levers back equally from their neutral position. Reverse speed increases as the levers are moved back farther. Maximum reverse speed is reached when the levers hit the rear of the forward-reverse slot. When moving in reverse, push- ing the levers forward slows the machine, and the machine stops when the neutral position is reached.

NOTE: Reverse is spring loaded to return to neutral. This spring resistance may be felt when moving the traction levers into reverse. When the levers are released in reverse, spring tension will slowly return them to the neutral position.

STEERING - To steer, move one lever forward and one back.

Turns during forward movement:

–Right turn - move the right traction lever back toward neutral to slow the right drive wheel.

–Left turn - move the left traction lever back to- ward neutral to slow the left drive wheel.

Turns during reverse movement:

–Reverse right turn - move the right traction lever forward toward neutral to slow the right drive wheel.

–Reverse left turn - move the left traction lever forward toward neutral to slow the left drive wheel.

Slow, sweeping turns are made with both traction levers on the same side of neutral and slightly apart. True zero radius turns about the center of the machine are made by having one lever in reverse while the other is in forward. By varying the relative positions of the two levers, the rate of turn is varied to suit the mowing situation.

Slow down before making sharp turns. The machine is capable of turning very rapidly when the levers are moved further apart from each other. Loss of control and/or turf damage may result.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents OPERATOR’S Manual California Wash Hands After HandlingTo the Owner Important MessageTo the Dealer Alitec BMP Central Fabricators Gannon Gill WAIN-ROY WoodsTable of Contents Safety Become AlertPreparing for Safe Operation Machine Operation Operating Safely GeneralStarting Interrupting operation Maneuvering SafelyMowing Slopes Seat Belt UseageFuel Maintenance Safety GeneralBlades Hydraulic SystemBattery Storage SafetyJump Starting Labels Hydraulic OIL Operators Manual is Located Under the Foot Plate TRANSPORT5 N N Power Take OFF PTO Switch P DFI operators right sideLift and traction levers operators right side Turns during forward movementTurns during reverse movement DFI Fule Valves V- a fuel tank selector Located on oil cooler bracket behind seatParking brake in on position Operators left side Foot Lift PedalPushing the Machine Compartment beneath the seat Viewed from abovePRE-OPERATION Check List PRE-OPERATION Check List OWNER’S ResponsibilityOperator Presence Interlock System FuelingBefore Starting the Engine Starting the EngineOperating Notes DrivingCutting Cutting TipsMachine EngineHydraulics First Every DailyMaintenance Record Battery Check DailyLubrication Hydraulic System After First Five 5 HoursPeriodic OIL Changes Engine OIL Spark PlugsFuel Filter Heavy Duty Cyclonic AIR Cleaner To replace air cleaner elementsEngine Cooling Cleaning Machine Washing MachineSharpening Blade InstallationBlade Removal Blade BalanceDeck Leveling Counterbalance SpringsRear Deck Rollers Height of cut ranges for roller adjustmentHeight of CUT Front Deck LIPParking Brake Parking brake assembly tire and deck not shownControl Levers For clarity brake in on positionNeutral Hydrostat AdjustmentsRight side adjustments Reverse ReturnCutterdeck Belt Tracking HandlesDampers Belt Replacement PUMP-DRIVE BeltLimited Warranty 8495 MM & Boundary Repair Parts Rev /15/2006 Woods Equipment Company

MZ3772K-DFI, MZ3761K-DFI specifications

The Woods Equipment MZ3761K-DFI and MZ3772K-DFI are the latest additions to the esteemed line of compact tractors, providing advanced technology and robust performance for both commercial and agricultural applications. These models are designed with a keen focus on user efficiency and ease of operation, making them suitable for a wide range of tasks such as landscaping, mowing, and general property maintenance.

One of the standout features of both the MZ3761K-DFI and MZ3772K-DFI is their powerful diesel engine. These tractors are equipped with Direct Fuel Injection (DFI) systems that ensure optimal fuel efficiency and reduced emissions, contributing to a more sustainable operational footprint. The engines also offer a seamless power delivery that enhances performance during challenging tasks, whether navigating rugged terrain or handling heavy attachments.

The MZ series features a user-friendly hydrostatic transmission that provides smooth operation and allows operators to effortlessly manage speed and direction with minimal effort. This feature is particularly beneficial for maneuvering in tight spaces or when executing precise tasks, making it a favorite among operators who value comfort and efficiency.

Both models come equipped with advanced hydraulic systems that enable enhanced lifting capabilities. This is particularly useful for tasks such as loading and moving materials. The hydraulic lift arms can accommodate a variety of attachments, from loaders to brush cutters, offering versatility to handle diverse applications.

These tractors are designed with operator comfort in mind, featuring ergonomically designed controls and spacious operator platforms. The adjustable seats ensure long hours of work can be performed without discomfort, while the visibility from the operator's seat allows for safe maneuvering around job sites.

In terms of build quality, the MZ3761K-DFI and MZ3772K-DFI boast heavy-duty construction that translates to durability and reliability. With robust frames and high-quality components, these tractors are built to endure rigorous use and provide dependable service over time.

Moreover, both models integrate advanced safety features, including roll-over protective structures (ROPS) and safety interlocks, ensuring that operators can work with confidence.

In summary, the Woods Equipment MZ3761K-DFI and MZ3772K-DFI are truly versatile compact tractors that deliver exceptional power, efficiency, and operator comfort. Their innovative technologies and robust build make them a worthy investment for professionals seeking reliable performance in their daily operations.
Top Page Image Contents