Woods Equipment MZ3761K-DFI, MZ3772K-DFI Power Take OFF PTO Switch P, DFI operators right side

Page 17

WOODS

CONTROLS

DFI operator's right side

THROTTLE (T) - Move the throttle lever forward

POWER TAKE OFF (PTO) SWITCH (P)

to increase engine speed until the maximum governed

- The operator must be in the seat when engaging

engine RPM is reached. Move the lever rearward to

the PTO or the engine will kill. Pulling the PTO switch

decrease engine speed until the engine reaches its idle

out engages (turns on) the PTO and starts the blades

speed.

or other attachment. Pushing the PTO switch in

KEYSWITCH (K) - The keyswitch has three

disengages (turns off) the PTO and stops the blades or

other attachment.

positions: OFF, RUN, and START. Insert the key and

NOTE: The PTO switch does not control attachments

turn it clockwise to move the switch from OFF to RUN.

powered by a separate engine.

Turn it further to START and hold to engage the starter.

– Disengage the PTO whenever you stop or leave

Release the key and the switch will return to RUN from

the operator’s position.

START. Turn the key counterclockwise to OFF to stop the

– Shut off engine with the key and remove the

engine. On the Predator Pro DFI models, if either tank

spark plug wires before making adjustments or

runs out of fuel, cycle the keyswitch to the ON or RUN

unplugging a clogged mower.

position 2 to 3 times, without cranking, for 10 seconds to

– Do not engage the PTO until ready to start mowing.

prime the fuel system.

HOUR METER (M) - Records accumulated

 

CHOKE (C) - Pull the choke control out to set the

time the machine is in operation and provides

choke ON. Push it in to set the choke OFF.

service alerts. Push and release MODE button to

toggle between functions. Provided service alerts

 

ENGINE INDICATOR LIGHT (E) - A check

include change engine oil and filter, change hydraulic

oil, and service air filter. When the service time is

engine light is provided on DFI units for Kawasaki engine

approaching, an alert message will flash temporarily,

dealers to diagnose engine codes. NOTE: When starting

interrupting whatever mode the meter is in. This will

the engine, the indicator light will come on briefly as an

continue until the alert is reset. When the service

engine system check. If the light continues to blink after

interval reaches "0" hours, the word "NOW" replaces

initial start-up, shut off engine, insure the battery cables

the hours remaining. To reset the service alert,

are connected properly and securely, and that the battery

depress and hold down the mode button for 6 seconds

while in the alert to be cleared.

is charged properly. Re-start the engine. If the indica-

 

tor light continues to blink, contact an authorized Woods

 

dealer.

 

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents OPERATOR’S Manual Wash Hands After Handling CaliforniaTo the Dealer Important MessageTo the Owner Alitec BMP Central Fabricators Gannon Gill WAIN-ROY WoodsTable of Contents Become Alert SafetyPreparing for Safe Operation Starting Machine Operation Operating SafelyGeneral Maneuvering Safely Interrupting operationSeat Belt Useage Mowing SlopesBlades Maintenance Safety GeneralFuel Hydraulic SystemJump Starting BatteryStorage Safety Labels Hydraulic OIL Operators Manual is Located Under the Foot Plate TRANSPORT5 N N DFI operators right side Power Take OFF PTO Switch PTurns during reverse movement Lift and traction levers operators right sideTurns during forward movement Located on oil cooler bracket behind seat DFI Fule Valves V- a fuel tank selectorPushing the Machine Foot Lift PedalParking brake in on position Operators left side Compartment beneath the seat Viewed from abovePRE-OPERATION Check List OWNER’S Responsibility PRE-OPERATION Check ListBefore Starting the Engine FuelingOperator Presence Interlock System Starting the EngineDriving Operating NotesCutting Tips CuttingHydraulics EngineMachine First Every DailyMaintenance Record Check Daily BatteryLubrication Periodic OIL Changes Hydraulic SystemAfter First Five 5 Hours Fuel Filter Engine OILSpark Plugs Engine Cooling Heavy Duty Cyclonic AIR CleanerTo replace air cleaner elements Washing Machine Cleaning MachineBlade Removal Blade InstallationSharpening Blade BalanceCounterbalance Springs Deck LevelingHeight of CUT Height of cut ranges for roller adjustmentRear Deck Rollers Front Deck LIPControl Levers Parking brake assembly tire and deck not shownParking Brake For clarity brake in on positionRight side adjustments Hydrostat AdjustmentsNeutral Reverse ReturnDampers Cutterdeck BeltTracking Handles PUMP-DRIVE Belt Belt ReplacementLimited Warranty 8495 MM & Boundary Repair Parts Rev /15/2006 Woods Equipment Company

MZ3772K-DFI, MZ3761K-DFI specifications

The Woods Equipment MZ3761K-DFI and MZ3772K-DFI are the latest additions to the esteemed line of compact tractors, providing advanced technology and robust performance for both commercial and agricultural applications. These models are designed with a keen focus on user efficiency and ease of operation, making them suitable for a wide range of tasks such as landscaping, mowing, and general property maintenance.

One of the standout features of both the MZ3761K-DFI and MZ3772K-DFI is their powerful diesel engine. These tractors are equipped with Direct Fuel Injection (DFI) systems that ensure optimal fuel efficiency and reduced emissions, contributing to a more sustainable operational footprint. The engines also offer a seamless power delivery that enhances performance during challenging tasks, whether navigating rugged terrain or handling heavy attachments.

The MZ series features a user-friendly hydrostatic transmission that provides smooth operation and allows operators to effortlessly manage speed and direction with minimal effort. This feature is particularly beneficial for maneuvering in tight spaces or when executing precise tasks, making it a favorite among operators who value comfort and efficiency.

Both models come equipped with advanced hydraulic systems that enable enhanced lifting capabilities. This is particularly useful for tasks such as loading and moving materials. The hydraulic lift arms can accommodate a variety of attachments, from loaders to brush cutters, offering versatility to handle diverse applications.

These tractors are designed with operator comfort in mind, featuring ergonomically designed controls and spacious operator platforms. The adjustable seats ensure long hours of work can be performed without discomfort, while the visibility from the operator's seat allows for safe maneuvering around job sites.

In terms of build quality, the MZ3761K-DFI and MZ3772K-DFI boast heavy-duty construction that translates to durability and reliability. With robust frames and high-quality components, these tractors are built to endure rigorous use and provide dependable service over time.

Moreover, both models integrate advanced safety features, including roll-over protective structures (ROPS) and safety interlocks, ensuring that operators can work with confidence.

In summary, the Woods Equipment MZ3761K-DFI and MZ3772K-DFI are truly versatile compact tractors that deliver exceptional power, efficiency, and operator comfort. Their innovative technologies and robust build make them a worthy investment for professionals seeking reliable performance in their daily operations.
Top Page Image Contents