Woods Equipment MZ3761K-DFI, MZ3772K-DFI manual Hydrostat Adjustments, Neutral, Reverse Return

Page 37

WOODS

ADJUSTMENTS

HYDROSTAT ADJUSTMENTS

A turnbuckle-style hydrostat neutral adjustment is provided.

Neutral:

1.Support the machine with the rear wheels off the ground. Use jackstands or equivalent sup- port. Do not rely only on mechanical or hydraulic jacks.

2.Move the traction levers out into the neutral lock position and raise the seat.

3.Disconnect the seat switch wire K and temporarily connect the two terminals with jumper wire J as shown.

4.Start the engine and run at low speed.

5.Loosen jam nuts T at both ends of the control rod.

6.Rotate the control rod until the corresponding wheel stops turning. Lock the jam nuts. Run the engine up to high idle to check the adjustment. Readjust if necessary.

7.Repeat steps 5 and 6 for the opposite side.

8.Remove the jumper wire J and reconnect the seat switch.

Reverse Return:

1.Move traction levers out to the neutral lock posi- tion and raise the seat.

2.Locknut U should be run on the bolt as far as it will go.

3.

Loosen jam nut Y. Adjust the clevis yoke by

Right side adjustments

 

turning the head of the bolt until the clevis pin

 

 

just makes contact with the rear of the slot in the

 

 

lever it connects with. Tighten jam nut Y.

 

4.

Repeat steps 2 and 3 for the opposite side.

 

NOTE: A slight creep in reverse is acceptable provided the wheel does not turn and the hydrostat pump does not whine when the parking brake is on.

37

Image 37
Contents OPERATOR’S Manual Wash Hands After Handling CaliforniaTo the Dealer Important MessageTo the Owner Alitec BMP Central Fabricators Gannon Gill WAIN-ROY WoodsTable of Contents Become Alert SafetyPreparing for Safe Operation General Machine Operation Operating SafelyStarting Maneuvering Safely Interrupting operationSeat Belt Useage Mowing SlopesBlades Maintenance Safety GeneralFuel Hydraulic SystemStorage Safety BatteryJump Starting Labels Hydraulic OIL Operators Manual is Located Under the Foot Plate TRANSPORT5 N N DFI operators right side Power Take OFF PTO Switch PTurns during forward movement Lift and traction levers operators right sideTurns during reverse movement Located on oil cooler bracket behind seat DFI Fule Valves V- a fuel tank selectorPushing the Machine Foot Lift PedalParking brake in on position Operators left side Compartment beneath the seat Viewed from abovePRE-OPERATION Check List OWNER’S Responsibility PRE-OPERATION Check ListBefore Starting the Engine FuelingOperator Presence Interlock System Starting the EngineDriving Operating NotesCutting Tips CuttingHydraulics EngineMachine First Every DailyMaintenance Record Check Daily BatteryLubrication After First Five 5 Hours Hydraulic SystemPeriodic OIL Changes Spark Plugs Engine OILFuel Filter To replace air cleaner elements Heavy Duty Cyclonic AIR CleanerEngine Cooling Washing Machine Cleaning MachineBlade Removal Blade InstallationSharpening Blade BalanceCounterbalance Springs Deck LevelingHeight of CUT Height of cut ranges for roller adjustmentRear Deck Rollers Front Deck LIPControl Levers Parking brake assembly tire and deck not shownParking Brake For clarity brake in on positionRight side adjustments Hydrostat AdjustmentsNeutral Reverse ReturnTracking Handles Cutterdeck BeltDampers PUMP-DRIVE Belt Belt ReplacementLimited Warranty 8495 MM & Boundary Repair Parts Rev /15/2006 Woods Equipment Company

MZ3772K-DFI, MZ3761K-DFI specifications

The Woods Equipment MZ3761K-DFI and MZ3772K-DFI are the latest additions to the esteemed line of compact tractors, providing advanced technology and robust performance for both commercial and agricultural applications. These models are designed with a keen focus on user efficiency and ease of operation, making them suitable for a wide range of tasks such as landscaping, mowing, and general property maintenance.

One of the standout features of both the MZ3761K-DFI and MZ3772K-DFI is their powerful diesel engine. These tractors are equipped with Direct Fuel Injection (DFI) systems that ensure optimal fuel efficiency and reduced emissions, contributing to a more sustainable operational footprint. The engines also offer a seamless power delivery that enhances performance during challenging tasks, whether navigating rugged terrain or handling heavy attachments.

The MZ series features a user-friendly hydrostatic transmission that provides smooth operation and allows operators to effortlessly manage speed and direction with minimal effort. This feature is particularly beneficial for maneuvering in tight spaces or when executing precise tasks, making it a favorite among operators who value comfort and efficiency.

Both models come equipped with advanced hydraulic systems that enable enhanced lifting capabilities. This is particularly useful for tasks such as loading and moving materials. The hydraulic lift arms can accommodate a variety of attachments, from loaders to brush cutters, offering versatility to handle diverse applications.

These tractors are designed with operator comfort in mind, featuring ergonomically designed controls and spacious operator platforms. The adjustable seats ensure long hours of work can be performed without discomfort, while the visibility from the operator's seat allows for safe maneuvering around job sites.

In terms of build quality, the MZ3761K-DFI and MZ3772K-DFI boast heavy-duty construction that translates to durability and reliability. With robust frames and high-quality components, these tractors are built to endure rigorous use and provide dependable service over time.

Moreover, both models integrate advanced safety features, including roll-over protective structures (ROPS) and safety interlocks, ensuring that operators can work with confidence.

In summary, the Woods Equipment MZ3761K-DFI and MZ3772K-DFI are truly versatile compact tractors that deliver exceptional power, efficiency, and operator comfort. Their innovative technologies and robust build make them a worthy investment for professionals seeking reliable performance in their daily operations.