Woods Equipment MZ3772K-DFI, MZ3761K-DFI manual Deck Leveling, Counterbalance Springs

Page 34

ADJUSTMENTS

DECK LEVELING

WOODS

1. Park the machine on a smooth, level surface. Raise the deck to the transport position.

2. Lower the deck onto a set of equal height blocks A under the rear corners of the deck. Place an- other set of blocks B under the front of the deck so that the deck top is pitched forward 1/8".

NOTE: The front and rear of the deck are at different heights.

3.Measure the height of the blade cutting edge above the ground. Remove pin C and set the height of cut lever D to that height.

4.Loosen nuts I at all four corners of the deck. NOTE: This will relieve tension on chains H.

5.Loosen the jam nuts E on the height of cut

clips F and adjusting screws G. Turn the adjust- ing screws G until the play is taken out of the chains H at all four corners. Tighten the jam nuts E against the clips F and at the adjusting screws G. Retighten nuts I at this time.

COUNTERBALANCE SPRINGS

1.Raise the cutterdeck all the way.

2.Adjust the spring A with nut B: The spring length should be set at approximately 8-3/4", inside loop to inside loop, when in transport position.

The springs may be tightened or loosened from this point according to personal preference.

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents OPERATOR’S Manual California Wash Hands After HandlingTo the Owner Important MessageTo the Dealer Alitec BMP Central Fabricators Gannon Gill WAIN-ROY WoodsTable of Contents Safety Become AlertPreparing for Safe Operation General Machine Operation Operating SafelyStarting Interrupting operation Maneuvering SafelyMowing Slopes Seat Belt UseageFuel Maintenance Safety GeneralBlades Hydraulic SystemStorage Safety BatteryJump Starting Labels Hydraulic OIL Operators Manual is Located Under the Foot Plate TRANSPORT5 N N Power Take OFF PTO Switch P DFI operators right sideTurns during forward movement Lift and traction levers operators right sideTurns during reverse movement DFI Fule Valves V- a fuel tank selector Located on oil cooler bracket behind seatParking brake in on position Operators left side Foot Lift PedalPushing the Machine Compartment beneath the seat Viewed from abovePRE-OPERATION Check List PRE-OPERATION Check List OWNER’S ResponsibilityOperator Presence Interlock System FuelingBefore Starting the Engine Starting the EngineOperating Notes DrivingCutting Cutting TipsMachine EngineHydraulics First Every DailyMaintenance Record Battery Check DailyLubrication After First Five 5 Hours Hydraulic SystemPeriodic OIL Changes Spark Plugs Engine OILFuel Filter To replace air cleaner elements Heavy Duty Cyclonic AIR CleanerEngine Cooling Cleaning Machine Washing MachineSharpening Blade InstallationBlade Removal Blade BalanceDeck Leveling Counterbalance SpringsRear Deck Rollers Height of cut ranges for roller adjustmentHeight of CUT Front Deck LIPParking Brake Parking brake assembly tire and deck not shownControl Levers For clarity brake in on positionNeutral Hydrostat AdjustmentsRight side adjustments Reverse ReturnTracking Handles Cutterdeck BeltDampers Belt Replacement PUMP-DRIVE BeltLimited Warranty 8495 MM & Boundary Repair Parts Rev /15/2006 Woods Equipment Company

MZ3772K-DFI, MZ3761K-DFI specifications

The Woods Equipment MZ3761K-DFI and MZ3772K-DFI are the latest additions to the esteemed line of compact tractors, providing advanced technology and robust performance for both commercial and agricultural applications. These models are designed with a keen focus on user efficiency and ease of operation, making them suitable for a wide range of tasks such as landscaping, mowing, and general property maintenance.

One of the standout features of both the MZ3761K-DFI and MZ3772K-DFI is their powerful diesel engine. These tractors are equipped with Direct Fuel Injection (DFI) systems that ensure optimal fuel efficiency and reduced emissions, contributing to a more sustainable operational footprint. The engines also offer a seamless power delivery that enhances performance during challenging tasks, whether navigating rugged terrain or handling heavy attachments.

The MZ series features a user-friendly hydrostatic transmission that provides smooth operation and allows operators to effortlessly manage speed and direction with minimal effort. This feature is particularly beneficial for maneuvering in tight spaces or when executing precise tasks, making it a favorite among operators who value comfort and efficiency.

Both models come equipped with advanced hydraulic systems that enable enhanced lifting capabilities. This is particularly useful for tasks such as loading and moving materials. The hydraulic lift arms can accommodate a variety of attachments, from loaders to brush cutters, offering versatility to handle diverse applications.

These tractors are designed with operator comfort in mind, featuring ergonomically designed controls and spacious operator platforms. The adjustable seats ensure long hours of work can be performed without discomfort, while the visibility from the operator's seat allows for safe maneuvering around job sites.

In terms of build quality, the MZ3761K-DFI and MZ3772K-DFI boast heavy-duty construction that translates to durability and reliability. With robust frames and high-quality components, these tractors are built to endure rigorous use and provide dependable service over time.

Moreover, both models integrate advanced safety features, including roll-over protective structures (ROPS) and safety interlocks, ensuring that operators can work with confidence.

In summary, the Woods Equipment MZ3761K-DFI and MZ3772K-DFI are truly versatile compact tractors that deliver exceptional power, efficiency, and operator comfort. Their innovative technologies and robust build make them a worthy investment for professionals seeking reliable performance in their daily operations.
Top Page Image Contents