Woods Equipment MZ3772K-DFI manual Control Levers, Parking Brake, For clarity brake in on position

Page 36

ADJUSTMENTS

 

WOODS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CONTROL LEVERS

 

 

There are two mounting positions for the control

 

 

levers, upper and lower. The lower position works

 

 

well for most people. Taller operators may need the

 

 

upper position.

 

 

To adjust the height of the control levers:

 

 

– Remove bolts A and nuts B.

 

 

– Align holes in control lever D with appropriate

 

 

 

holes in traction lever bracket C.

 

 

– Install bolts A and nuts B.

 

 

The upper mounting hole for the control levers is

 

 

slotted to allow fore-aft adjustment and to allow

 

 

alignment of the levers.

 

 

To adjust or align the control levers:

 

 

–

Loosen nuts B.

 

 

– Adjust control lever position.

 

 

–

Tighten nuts B.

 

 

 

 

 

 

PARKING BRAKE

NOTE: Parking brake must be in the OFF position to

Park machine on a smooth level surface.

properly seat brake drums.

 

 

Support the machine with the rear wheels off the

 

 

ground, using jack stands or equivalent. DO NOT

 

 

rely on mechanical or hydraulic jacks.

 

 

1.

Remove rear wheels.

 

 

2.

Measure spring length O with parking brake N in

 

 

 

the OFF position.

 

 

3.

Move parking brake N to the ON position and

 

 

 

measure length of spring O again. When spring

 

 

 

deflects 3/8" it is properly adjusted.

 

 

4.

If adjustment is required, return parking brake N

 

 

 

to the OFF position.

 

 

5.

Disconnect one end of rod M at the brake and

 

 

 

loosen jam nut.

 

 

6.

Adjust rod M in or out as required until 3/8" de-

Parking brake assembly (tire and deck not shown

 

flection in brake spring O is achieved with park-

 

ing brake N in the ON position.

for clarity - brake in ON position).

7.

Reconnect rod M and retighten jam nut.

 

 

8.

Repeat steps 2-7 on opposite side of machine.

This adjustment will cause the brake springs to

9.

Replace wheels and tighten wheel nuts.

stretch 3/8" when the parking brake is in the ON posi-

 

 

tion, providing the correct parking brake force without

 

 

overloading the brake arm.

 

 

 

 

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents OPERATOR’S Manual California Wash Hands After HandlingImportant Message To the DealerTo the Owner Alitec BMP Central Fabricators Gannon Gill WAIN-ROY WoodsTable of Contents Safety Become AlertPreparing for Safe Operation Machine Operation Operating Safely GeneralStarting Interrupting operation Maneuvering SafelyMowing Slopes Seat Belt UseageMaintenance Safety General BladesFuel Hydraulic SystemBattery Storage SafetyJump Starting Labels Hydraulic OIL Operators Manual is Located Under the Foot Plate TRANSPORT5 N N Power Take OFF PTO Switch P DFI operators right sideLift and traction levers operators right side Turns during forward movementTurns during reverse movement DFI Fule Valves V- a fuel tank selector Located on oil cooler bracket behind seatFoot Lift Pedal Pushing the MachineParking brake in on position Operators left side Compartment beneath the seat Viewed from abovePRE-OPERATION Check List PRE-OPERATION Check List OWNER’S ResponsibilityFueling Before Starting the EngineOperator Presence Interlock System Starting the EngineOperating Notes DrivingCutting Cutting TipsEngine HydraulicsMachine First Every DailyMaintenance Record Battery Check DailyLubrication Hydraulic System After First Five 5 HoursPeriodic OIL Changes Engine OIL Spark PlugsFuel Filter Heavy Duty Cyclonic AIR Cleaner To replace air cleaner elementsEngine Cooling Cleaning Machine Washing MachineBlade Installation Blade RemovalSharpening Blade BalanceDeck Leveling Counterbalance SpringsHeight of cut ranges for roller adjustment Height of CUTRear Deck Rollers Front Deck LIPParking brake assembly tire and deck not shown Control LeversParking Brake For clarity brake in on positionHydrostat Adjustments Right side adjustmentsNeutral Reverse ReturnCutterdeck Belt Tracking HandlesDampers Belt Replacement PUMP-DRIVE BeltLimited Warranty 8495 MM & Boundary Repair Parts Rev /15/2006 Woods Equipment Company

MZ3772K-DFI, MZ3761K-DFI specifications

The Woods Equipment MZ3761K-DFI and MZ3772K-DFI are the latest additions to the esteemed line of compact tractors, providing advanced technology and robust performance for both commercial and agricultural applications. These models are designed with a keen focus on user efficiency and ease of operation, making them suitable for a wide range of tasks such as landscaping, mowing, and general property maintenance.

One of the standout features of both the MZ3761K-DFI and MZ3772K-DFI is their powerful diesel engine. These tractors are equipped with Direct Fuel Injection (DFI) systems that ensure optimal fuel efficiency and reduced emissions, contributing to a more sustainable operational footprint. The engines also offer a seamless power delivery that enhances performance during challenging tasks, whether navigating rugged terrain or handling heavy attachments.

The MZ series features a user-friendly hydrostatic transmission that provides smooth operation and allows operators to effortlessly manage speed and direction with minimal effort. This feature is particularly beneficial for maneuvering in tight spaces or when executing precise tasks, making it a favorite among operators who value comfort and efficiency.

Both models come equipped with advanced hydraulic systems that enable enhanced lifting capabilities. This is particularly useful for tasks such as loading and moving materials. The hydraulic lift arms can accommodate a variety of attachments, from loaders to brush cutters, offering versatility to handle diverse applications.

These tractors are designed with operator comfort in mind, featuring ergonomically designed controls and spacious operator platforms. The adjustable seats ensure long hours of work can be performed without discomfort, while the visibility from the operator's seat allows for safe maneuvering around job sites.

In terms of build quality, the MZ3761K-DFI and MZ3772K-DFI boast heavy-duty construction that translates to durability and reliability. With robust frames and high-quality components, these tractors are built to endure rigorous use and provide dependable service over time.

Moreover, both models integrate advanced safety features, including roll-over protective structures (ROPS) and safety interlocks, ensuring that operators can work with confidence.

In summary, the Woods Equipment MZ3761K-DFI and MZ3772K-DFI are truly versatile compact tractors that deliver exceptional power, efficiency, and operator comfort. Their innovative technologies and robust build make them a worthy investment for professionals seeking reliable performance in their daily operations.
Top Page Image Contents