Woods Equipment MZ3772K-DFI, MZ3761K-DFI manual Engine OIL, Spark Plugs, Fuel Filter

Page 30

MAINTENANCE

WOODS

ENGINE OIL

Do not perform engine maintenance without the engine off, spark plug wires disconnected and PTO disengaged.

AFTER FIRST FIVE (5) HOURS

While the engine is warm:

1.Release the oil drain hose assembly from the engine clip J. Lay hose assembly over the frame edge.

2.Remove the rubber cap D from the tip of the hose assembly and turn the drain valve to allow oil to drain from the engine. Dispose of used oil in accordance with local requirements.

3.Clean drain valve and tighten the plastic portion of the drain valve back into the metal portion of the valve. Replace rubber cap over the tip of the valve. Replace hose assembly back into engine clip.

4.

Change oil filter.

5.Fill the crankcase with fresh oil to the full mark.

Do not overfill. See engine manual for oil specifications.

DAILY

1.Check oil level with the dipstick.

2.If oil is needed, add fresh oil of proper viscosity and grade. See engine manual for oil specifications. Do not overfill.

3.Replace dipstick before starting engine.

PERIODIC OIL CHANGES

1.See engine manual for oil and filter change inter- vals after the break-in period.

2.Follow instructions for first oil change, above.

SPARK PLUGS

Remove each plug and check condition.

–Good operating conditions are indicated if the plug has a light coating of grey or tan deposit.

–A white blistered coating indicates overheating. A black coating indicates an “over rich” fuel mixture. Both may be caused by a clogged air cleaner or improper carburetor adjustment.

–Do not sandblast, wire brush or otherwise attempt to repair a plug in poor condition. Best results are obtained with a new plug.

–Set plug gap as specified in engine manual..

FUEL FILTER

An inline fuel filter is located in the fuel supply line. Inspect at every oil change to make sure it is clean and unobstructed. Replace if dirty.

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents OPERATOR’S Manual California Wash Hands After HandlingTo the Owner Important MessageTo the Dealer Alitec BMP Central Fabricators Gannon Gill WAIN-ROY WoodsTable of Contents Safety Become AlertPreparing for Safe Operation Machine Operation Operating Safely GeneralStarting Interrupting operation Maneuvering SafelyMowing Slopes Seat Belt UseageFuel Maintenance Safety GeneralBlades Hydraulic SystemBattery Storage SafetyJump Starting Labels Hydraulic OIL Operators Manual is Located Under the Foot Plate TRANSPORT5 N N Power Take OFF PTO Switch P DFI operators right sideLift and traction levers operators right side Turns during forward movementTurns during reverse movement DFI Fule Valves V- a fuel tank selector Located on oil cooler bracket behind seatParking brake in on position Operators left side Foot Lift PedalPushing the Machine Compartment beneath the seat Viewed from abovePRE-OPERATION Check List PRE-OPERATION Check List OWNER’S ResponsibilityOperator Presence Interlock System FuelingBefore Starting the Engine Starting the EngineOperating Notes DrivingCutting Cutting TipsMachine EngineHydraulics First Every DailyMaintenance Record Battery Check DailyLubrication Hydraulic System After First Five 5 HoursPeriodic OIL Changes Engine OIL Spark PlugsFuel Filter Heavy Duty Cyclonic AIR Cleaner To replace air cleaner elementsEngine Cooling Cleaning Machine Washing MachineSharpening Blade InstallationBlade Removal Blade BalanceDeck Leveling Counterbalance SpringsRear Deck Rollers Height of cut ranges for roller adjustmentHeight of CUT Front Deck LIPParking Brake Parking brake assembly tire and deck not shownControl Levers For clarity brake in on positionNeutral Hydrostat AdjustmentsRight side adjustments Reverse ReturnCutterdeck Belt Tracking HandlesDampers Belt Replacement PUMP-DRIVE BeltLimited Warranty 8495 MM & Boundary Repair Parts Rev /15/2006 Woods Equipment Company

MZ3772K-DFI, MZ3761K-DFI specifications

The Woods Equipment MZ3761K-DFI and MZ3772K-DFI are the latest additions to the esteemed line of compact tractors, providing advanced technology and robust performance for both commercial and agricultural applications. These models are designed with a keen focus on user efficiency and ease of operation, making them suitable for a wide range of tasks such as landscaping, mowing, and general property maintenance.

One of the standout features of both the MZ3761K-DFI and MZ3772K-DFI is their powerful diesel engine. These tractors are equipped with Direct Fuel Injection (DFI) systems that ensure optimal fuel efficiency and reduced emissions, contributing to a more sustainable operational footprint. The engines also offer a seamless power delivery that enhances performance during challenging tasks, whether navigating rugged terrain or handling heavy attachments.

The MZ series features a user-friendly hydrostatic transmission that provides smooth operation and allows operators to effortlessly manage speed and direction with minimal effort. This feature is particularly beneficial for maneuvering in tight spaces or when executing precise tasks, making it a favorite among operators who value comfort and efficiency.

Both models come equipped with advanced hydraulic systems that enable enhanced lifting capabilities. This is particularly useful for tasks such as loading and moving materials. The hydraulic lift arms can accommodate a variety of attachments, from loaders to brush cutters, offering versatility to handle diverse applications.

These tractors are designed with operator comfort in mind, featuring ergonomically designed controls and spacious operator platforms. The adjustable seats ensure long hours of work can be performed without discomfort, while the visibility from the operator's seat allows for safe maneuvering around job sites.

In terms of build quality, the MZ3761K-DFI and MZ3772K-DFI boast heavy-duty construction that translates to durability and reliability. With robust frames and high-quality components, these tractors are built to endure rigorous use and provide dependable service over time.

Moreover, both models integrate advanced safety features, including roll-over protective structures (ROPS) and safety interlocks, ensuring that operators can work with confidence.

In summary, the Woods Equipment MZ3761K-DFI and MZ3772K-DFI are truly versatile compact tractors that deliver exceptional power, efficiency, and operator comfort. Their innovative technologies and robust build make them a worthy investment for professionals seeking reliable performance in their daily operations.
Top Page Image Contents