Woods Equipment LU126 Hose Kit Assemble and Route Hoses, Hose Routing Typical Installation

58025 Hose Kit

Assemble and Route Hoses

1. Attach a 90-degree elbow (2) and male quick cou- pler (3) to each loader supply hose (1).

2. Connect loader supply hoses to loader feedlines as shown in Figure 7.

3. Route hydraulic hoses along loader mount, under the right side of operator's platform, and over the rear axle. See Figure 8.

NOTE: Hoses must be routed so that they are not pinched, bent sharply, or chafed during operation. Hoses must not interfere with any tractor control

operation or contact any moving parts.

Figure 7. Loader Feedline Connection

1.53670 Hose, 150" x 3/4 JICM x 3/4 JICM

2.313053 Elbow, 3/4 JICF x 1/2 NPTM 90°

3.-------- Quick coupler, Male (not supplied)

Figure 8. Hose Routing (Typical Installation)

8 Hydraulic Installation MAN0041 (Rev. 4/4/2008)